The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
smtpd – Simple Mail Transfer Protocol daemon Synopsis smtpd [-dhnv] [-D macro=value] [-f file] [-P system] [-T trace] Description smtpd is a Simple Mail Transfer Protocol (SMTP) daemon which can be used as a machine’s primary mail system. smtpd can listen on a network interface and handle SMTP transactions; it can also be fed messages…
smtpctl, mailq – control the Simple Mail Transfer Protocol daemon Synopsis smtpctl command [argument …] mailq Description The smtpctl program controls smtpd(8). Commands may be abbreviated to the minimum unambiguous prefix; for example, sh ro for show routes. The mailq command is provided for compatibility with other MTAs and is simply a shortcut for show…
smtp – Postfix SMTP+LMTP client Synopsis smtp [generic Postfix daemon options] Description The Postfix SMTP+LMTP client implements the SMTP and LMTP mail delivery protocols. It processes message delivery requests from the queue manager. Each request specifies a queue file, a sender address, a domain or host to deliver to, and recipient information. This program expects…
smsd_selinux – Security Enhanced Linux Policy for the smsd processes Description Security-Enhanced Linux secures the smsd processes via flexible mandatory access control. The smsd processes execute with the smsd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
smrsh – restricted shell for sendmail Synopsis smrsh -c command Description The smrsh program is intended as a replacement for sh for use in the “prog” mailer in sendmail(8) configuration files. It sharply limits the commands that can be run using the “|program” syntax of sendmail in order to improve the over all security of…
SMPQUERY – Query Infiniband Subnet Management Attributes Synopsis smpquery [options] <op> <dest dr_path|lid|guid> [op params] Description smpquery allows a basic subset of standard SMP queries including the following: node info, node description, switch info, port info. Fields are displayed in human readable format. Options Current supported operations (case insensitive) and their parameters: Nodeinfo (NI) <addr>…
SMPDUMP – Dump Infiniband Subnet Management Attributes Synopsis smpdump [options] <dlid|dr_path> <attribute> [attribute_modifier] Description smpdump is a general purpose SMP utility which gets SM attributes from a specified SMA. The result is dumped in hex by default. Options dlid|drpath LID or DR path to SMA attribute IBA attribute ID for SM attribute attribute_modifier IBA modifier…
smp_zoned_broadcast – invoke ZONED BROADCAST SMP function Synopsis smp_zoned_broadcast [–broadcast=BT] [–expected=EX] [–fszg=FS] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–szg=ZGL] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ZONED BROADCAST function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may…
smp_zone_unlock – invoke ZONE UNLOCK SMP function Synopsis smp_zone_unlock [–activate] [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ZONE UNLOCK function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced…
smp_zone_lock – invoke ZONE LOCK SMP function Synopsis smp_zone_lock [–expected=EX] [–fpass=FP] [–help] [–hex] [–inactivity=TL] [–interface=PARAMS] [–password=PA] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ZONE LOCK function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may…
smp_zone_activate – invoke ZONE ACTIVATE SMP function Synopsis smp_zone_activate [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ZONE ACTIVATE function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from…
smp_write_gpio – invoke WRITE GPIO REGISTER (ENHANCED) SMP function Synopsis smp_write_gpio [–count=CO] [–data=H,H…] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–type=TY] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) WRITE GPIO REGISTER or a WRITE GPIO REGISTER ENHANCED function request to an SMP target. The SMP target is identified by the SMP_DEVICE and…
smp_* – invoke a SAS Serial Management Protocol (SMP) function Synopsis smp_* [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Serial Attached SCSI (SAS) is a transport (also known as a interconnect) used by storage systems. A SAS system is made up of Host Bus Adapters (HBAs typically containing SCSI initiators), disks (referred…
smp_rep_zone_perm_tbl – invoke REPORT ZONE PERMISSION TABLE function Synopsis smp_rep_zone_perm_tbl [–append] [–bits=COL] [–help] [–hex] [–interface=PARAMS] [–multiple] [–nocomma] [–num=MD] [–permf=FN] [–raw] [–report=RT] [–sa=SAS_ADDR] [–start=SS] [–verbose] [–version] SMP_DEVICE[,N] Description Sends one or more SAS Serial Management Protocol (SMP) REPORT ZONE PERMISSION TABLE function requests to an SMP target. The SMP target is identified by the SMP_DEVICE and…
smp_rep_zone_man_pass – invoke REPORT ZONE MANAGER PASSWORD function Synopsis smp_rep_zone_man_pass [–fpass=FP] [–help] [–hex] [–interface=PARAMS] [–phex] [–raw] [–report=RT] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT ZONE MANAGER PASSWORD function requests to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the…
smp_rep_self_conf_stat – invoke REPORT SELF-CONFIGURATION STATUS SMP function Synopsis smp_rep_self_conf_stat [–brief] [–help] [–hex] [–index=SDI] [–interface=PARAMS] [–last] [–one] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT SELF-CONFIGURATION STATUS function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the…
smp_rep_route_info – invoke REPORT ROUTE INFORMATION SMP function Synopsis smp_rep_route_info [–help] [–hex] [–index=IN] [–interface=PARAMS] [–multiple] [–num=NUM] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT ROUTE INFORMATION function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface,…
smp_rep_phy_sata – invoke REPORT PHY SATA SMP function Synopsis smp_rep_phy_sata [–affiliation=AC] [–help] [–hex] [–interface=PARAMS] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY SATA request function to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR…
smp_rep_phy_event_list – invoke REPORT PHY EVENT LIST SMP function Synopsis smp_rep_phy_event_list [–desc] [–enumerate] [–force] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–long] [–nonz] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT LIST function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR….
smp_rep_phy_event – invoke REPORT PHY EVENT SMP function Synopsis smp_rep_phy_event [–desc] [–enumerate] [–help] [–hex] [–interface=PARAMS] [–long] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface,…