The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME sndfile-concat – concatenates two or more audio files SYNOPSIS sndfile-concat infile1 infile2 …. outfile DESCRIPTION sndfile-concat generates a new output file by concatenating two or more input files. The format of the output file is the same as the format of the input file. sndfile-concat does its work using libsndfile (http://www.mega-nerd.com/libsndfile/). AUTHOR This manual…
NAME sndfile-cmp – compares two audio files SYNOPSIS sndfile-cmp file1 file2 DESCRIPTION sndfile-cmp compares the audio data of two sound files. In particular most differences in the audio file header, particularly metadata like string info, are completely ignored. sndfile-cmp does its work using libsndfile (http://www.mega-nerd.com/libsndfile/). AUTHOR This manual page was written by Erik de Castro…
NAME snapraid – SnapRAID Backup For Disk Arrays SYNOPSIS snapraid [-c, –conf CONFIG] [-f, –filter PATTERN] [-d, –filter-disk NAME] [-m, –filter-missing] [-e, –filter-error] [-a, –audit-only] [-h, –pre-hash] [-i, –import DIR] [-p, –plan PERC|bad|new|full] [-o, –older-than DAYS] [-l, –log FILE] [-Z, –force-zero] [-E, –force-empty] [-U, –force-uuid] [-D, –force-device] [-N, –force-nocopy] [-F, –force-full] [-S, –start BLKSTART] [-B,…
NAME snapconv – Sinclair ZX Spectrum snapshot converter SYNOPSIS snapconv [ -c ] [ -n ] infile outfile DESCRIPTION snapconv converts between ZX Spectrum snapshot files. OPTIONS -c specifies that all data in the output snapshot should be compressed, even if that compression will result in a bigger file than if some data is left…
NAME snap2tzx – Convert ZX Spectrum snapshot to .tzx tape images SYNOPSIS snap2tzx [-1 string] [-2 string] [-b colour] [-g string] [-l string] [-o filename] [-r] [-s speed] [-v] [-$ filename] snapshot DESCRIPTION snap2tzx converts a ZX Spectrum snapshot into a .tzx tape image. OPTIONS -1 string causes string (which has a maximum of 32…
NAME sn – Digitally sign/verify/compare strongnames on CLR assemblies. SYNOPSIS sn [-q | -quiet] [options] [parameters] DESCRIPTION Digitally sign, verify or compare CLR assemblies using strongnames. You can use the sn command to create "snk files" using the -k option described below. CONFIGURATION OPTIONS Configuration options are stored in the machine.config configuration file under /configuration/strongNames….
* NAME smtptest – interactive SMTP test program SYNOPSIS smtptest [ -t keyfile ] [ -p port ] [ -m mechanism ] [ -a userid ] [ -u userid ] [ -k num ] [ -l num ] [ -r realm ] [ -f file ] [ -n num ] [ -s ] [ -c…
NAME smtpping – SMTP benchmarking and measurement tool SYNOPSIS [-dqrJ46 ] [-p port ] [-w wait ] [-c count ] [-P parallell ] [-s size ] [-f file ] [-H hello ] [-S sender ] recipient [@server ] DESCRIPTION is a small tool that performs SMTP server delay, delay variation and throughput measurements. It must…
NAME smtp-source – parallelized SMTP/LMTP test generator SYNOPSIS smtp-source [options] [inet:]host[:port] smtp-source [options] unix:pathname DESCRIPTION smtp-source connects to the named host and TCP port (default: port 25) and sends one or more messages to it, either sequentially or in parallel. The program speaks either SMTP (default) or LMTP. Connections can be made to UNIX-domain and…
NAME smtp-sink – parallelized SMTP/LMTP test server SYNOPSIS smtp-sink [options] [inet:][host]:port backlog smtp-sink [options] unix:pathname backlog DESCRIPTION smtp-sink listens on the named host (or address) and port. It takes SMTP messages from the network and throws them away. The purpose is to measure client performance, not protocol compliance. smtp-sink may also be configured to capture…
NAME smproxy – Session Manager Proxy SYNOPSIS smproxy [-clientId id] [-restore saveFile] [-version] OPTIONS -clientId id Specifies the session ID used by smproxy in the previous session. -restore saveFile Specifies the file used by smproxy to save state in the previous session. -version Prints the program version and exits. DESCRIPTION smproxy allows X applications that…
NAME SMPlayer – The best GUI frontend for MPlayer SYNOPSIS smplayer [-minigui] [-mpcgui] [-defaultgui] [-config-path <directory>] [-send-action <action_name>] [-actions <action_list>] [[-no]-close-at-end] [[-no]-fullscreen] [-sub <subtitle_file>] [-pos <x> <y>] [-size <width> <height>] [-add-to-playlist] [-disable-server] [-help|–help|-h|-?] [<media1>] [<media2>]… DESCRIPTION SMPlayer is a GUI media player based on Qt, using mplayer(1) as its backend. OPTIONS -minigui Open the mini…
smoltSendProfie – Submit Smolt hardware profile to server Synopsis smoltSendProfile [options] Description smoltSendProfile program submits the hardware profile of the current machine to the Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. Options -p, –printOnly Display information only; do not send -a, –autoSend Don’t prompt to send; just send -r,…
smoltGui – GUI for Smolt hardware profile submission Synopsis smoltGui Description smoltGui is a graphical user interface that can be used to submit Smolt hardware profiles to a Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. Options smoltGui has no command-line options. See Also smoltSendProfile(1), smoltDeleteProfile(1). Author smoltGui was written…
smoltDeleteProfie – Delete Smolt hardware profile from server Synopsis smoltDeleteProfile [options] Description smoltDeleteProfile deletes the machine’s profile from a remote Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. Options -s SMOON_URL, –server=SMOON_URL Specify the URL of the server -u USERAGENT, –useragent=USERAGENT, –user_agent=USERAGENT Specify HTTP user agent (default "smolt/0.97") -t TIMEOUT,…
NAME smokeping_cgi – SmokePing webfrontend OVERVIEW This script acts as a ‘website’ for your SmokePing monitoring operation. It presents the targets you are looking at in a tree structure and draws graphs as they are required by people looking at the pages. DESCRIPTION To get smokeping_cgi going, you need a webserver which allows you to…
NAME smokeping – Commandline tool for SmokePing SYNOPSIS smokeping [ –email | –makepod | –version | –restart ] Options: –man[=x] Show the manpage for the program (or for probe x, if specified) –help Help :-) –email Send SmokePing Agents to all Targets marked DYNAMIC –config=x Use a config file different from the default –check Just…
NAME smixlate – translate SMI/SPPI identifiers SYNOPSIS smixlate [ -Vhm ] [ -c file ] [ -p module ] [ -l level ] module(s) DESCRIPTION The smixlate program is used to translate identifiers and especially OIDs into a more human readable format. OPTIONS -V, –version Show the smixlate version and exit. -h, –help Show a…
NAME smiucv – helper utility that provides an IUCV interface to the z/VM System Management API (SMAPI). SYNOPSYS smiucv [user] [name] <request> DESCRIPTION smiucv is a utility which reads requests from stdin, sends them to the SMAPI server via IUCV and writes the response to stdout. It is intended to be used with the smaclient…
NAME smistrip – extract MIB or PIB modules from text files, like RFCs or I-Ds SYNOPSIS smistrip [ -Vhn ] [ -d dir ] [ -m module ] [ file(s) ] DESCRIPTION The smistrip program is used to extract MIB and PIB module files from ASCII documents like RFCs or Internet Drafts. Modules are identified…