The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME sgml2xml-isoent – Convert SGML to XML with support for ISO entities SYNOPSIS sgml2xml-isoent [sgml-document] DESCRIPTION sgml2xml-isoent converts an SGML document to XML, with support for the ISO entities. This is done by using sgml2xml(1) from the SP package (or osx(1) from the OpenSP package), and the declaration for the XML version of the ISO…
NAME sgitopnm – convert a SGI image file to a portable anymap SYNOPSIS sgitopnm [-verbose] [-channel c] [SGIfile] DESCRIPTION Reads an SGI image file as input. Produces a PGM image for a 2-dimensional (1 channel) input file, and a PPM image for a 3-dimensional (3 or more channels) input file. Alternatively, produces a PGM image…
NAME sgfilter – scan something for viruses/spams over sagator’s filterd() service SYNOPSIS sgfilter [–help] [–host hostname] [–port number] [–codes|-c] [–non-safe|-x] [filename] DESCRIPTION This command is a part of sagator. It can be used to scan emails for viruses/spams. It is usable for example for courier smtpd, but can be used also for procmail or other…
NAME sgepasswd – Modify the xxQS_NAMExx password file of xxQS_NAMExx SYNTAX sgepasswd [[ -D domain ] -d user ] sgepasswd [ -D domain ] [ user ] DESCRIPTION sgepasswd modifies the xxQS_NAMExx password file This file contains a list of usernames and their Microsoft Windows password in encrypted form. and on hosts running Microsoft Windows…
NAME sgen – Mono XML Serializer GENerator SYNOPSIS sgen [options] DESCRIPTION Generates pre-compilable custom XML serializer classes for specific types. OPTIONS –assembly[:filename], -a Specifies the assembly filename to process. –type[:typefullname], -t Explicitly specifies the runtime type to process. –reference:[filename], -r Specifies an assembly filename, which is referenced by the target assembly and thus required to…
NAME work – do some work for testing purposes SYNTAX $SGE_ROOT/utilbin/$ARCH/work [-f n] [-w n] [-in fname] [-out fname] [-stackK n] [-stackM n] [-mallocK n] [-mallocM n] [-block_sigxcpu] [-block_sigxfsz] [-change_pgrp] [-daemonize] -daemonize ] DESCRIPTION This is a utility program intended to be run under xxQS_NAMExx for testing purposes. It can, for instance, run for a…
NAME sge_types – Grid Engine type descriptions DESCRIPTION The Grid Engine user interface consists of several programs and files. Some command-line switches and several file attributes are types. The syntax for these types is explained in this page. OBJECT TYPES These types are used for defining Grid Engine configuration: calendar_name A calendar name is the…
NAME sge_share_mon – print xxQS_NAMExx live share tree SYNOPSIS sge_share_mon [-c count] [-d delimiter] [-f field,field…] [-h] [-i interval] [-l delimiter] [-m output_mode] [-n] [-o output_file] [-r delimiter] [-s string_format] [-t] [-u] [-x] DESCRIPTION sge_share_mon prints the live state of the xxQS_NAMExx share tree (as opposed to static graphical view). It does so for a…
NAME sge_intro – xxQS_NAMExx, a facility for executing jobs on remote machines DESCRIPTION xxQS_NAMExx is a facility for executing Unix-like batch jobs (shell scripts or binaries) on a pool of cooperating CPUs. Jobs are queued and executed remotely according to defined policies. The CPUs may be in desktop systems, with jobs run on them at…
NAME Grid Engine Checkpointing – the Grid Engine checkpointing mechanism and checkpointing support DESCRIPTION Grid Engine supports two levels of checkpointing: the user level and a operating system provided transparent level. User level checkpointing refers to applications, which do their own checkpointing by writing restart files at certain times or algorithmic steps and by properly…
NAME busy-nodes, idle-nodes, dead-nodes, nodes-in-job, qselect-node-list – List xxQS_NAMExx node names by various criteria SYNOPSIS busy-nodes [-w] [-h|–help] idle-nodes [-w] [-h|–help] dead-nodes [-w] [-h|–help] nodes-in-job [-w] [-h|–help] jobid qselect-node-list [-h|–help] qselect_arg … DESCRIPTION busy-nodes, idle-nodes, and dead-nodes respectively list xxQS_NAMExx nodes which are: busy with one or more jobs, idle (without a job running), and…
NAME sge-disable-submits, sge-enable-submits – Prevent/allow xxQS_NAMExx job submission by non-privileged users SYNOPSIS sge-disable-submits [-h|–help] sge-enable-submits [-h|–help] DESCRIPTION sge-disable-submits Limits the xxQS_NAMExx global configuration to users in ACL ‘testing’ to prevent normal users submitting further jobs. sge-enable-submits undoes the effect of sge-disable-submits, allowing normal users to submit jobs again. You must previously have created the ‘testing’…
NAME sg – execute command as different group ID SYNOPSIS sg [-] [group [-c ] command] DESCRIPTION The sg command works similar to newgrp but accepts a command. The command will be executed with the /bin/sh shell. With most shells you may run sg from, you need to enclose multi-word commands in quotes. Another difference between newgrp and…
NAME sz2pat – convert sample files into extended GUS patches SYNOPSIS sfz2pat filename.sfz DESCRIPTION This documents both the conversion program sfz2pat and the sfz loader of the gt midi player. The name of one or more .wav files containing samples and various parameters describing the desired patch structure and how to play the patch are…
NAME sfxload, asfxload – load a SoundFont file on the Emux WaveTable SYNOPSIS sfxload [-options] fontfile asfxload [-options] fontfile DESCRIPTION sfxload and asfxload are utility program sto transfer the sound wave and instruments data in a SoundFont file to the AWE32 sound driver, or to the Emux WaveTable of ALSA sbawe and emu10k1 drivers. This…
NAME sftp – OpenSSH secure file transfer SYNOPSIS sftp [-46AaCfNpqrv ] [-B buffer_size ] [-b batchfile ] [-c cipher ] [-D sftp_server_path ] [-F ssh_config ] [-i identity_file ] [-J destination ] [-l limit ] [-o ssh_option ] [-P port ] [-R num_requests ] [-S program ] [-s subsystem | sftp_server ] destination DESCRIPTION sftp…
NAME sfparse – string file parse SYNOPSIS sfparse [ –utf8 | –unicode ] filename DESCRIPTION This tool has two different functions. When invoked with just a filename as argument, it checks that a file is a valid strings-file, which basically amounts to seeing whether the file is in proper serialized NSDictionary format (type "defaults plist"…
NAME sfinfo – display information about audio files SYNOPSIS sfinfo [options] audio files… DESCRIPTION sfinfo prints information about the specified audio files, including file format, sample rate, duration, and audio data format. By default sfinfo displays information in a longer, multi-line format; specifying the –short or -s option produces a short, single-line summary. Any files…
NAME sff2g3 – convert CAPI SFF fax files into G3 fax files SYNOPSIS sff2g3 [-r] [-d] [-v] input.SFF output.%03d.g3 DESCRIPTION Reads a Common ISDN API (CAPI) structured file format (SFF) input file, and converts every fax page contained in it to a raw G3 fax file. The input SFF files typically come from fax reception…
NAME dot – filter for drawing directed graphs neato – filter for drawing undirected graphs twopi – filter for radial layouts of graphs circo – filter for circular layout of graphs fdp – filter for drawing undirected graphs sfdp – filter for drawing large undirected graphs patchwork – filter for squarified tree maps osage –…