The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
hpidomain – A openhpi sample application that shows information about domains. It can also set the domain tag. Synopsis hpidomain [-D id] [-N host[:port]] [-C <cfgfile>] [-t tttt] [-V -X -h] hpidomain [–domain=id] [–host=host[:port]] [–cfgfile=file] [–tag=tttt] [–verbose] [–debug] [–help]Descriptionhpidomain displays the domain info for the specified domain. If no domain or host is selected, ohparam…
hpialarms – A openhpi sample application that shows "Alarm Control" management instruments Synopsis hpialarms [-D id] [-N host[:port]] [-C <cfgfile>] [-a 1|0][-b 1|0][-c 1|0][-m 1|0][-n 1|0][-p 1|0][-i n][-o][-X][-h] hpialarms [–domain=id] [–host=host[:port]] [–cfgfile=file] [–diska=1|0] [–diskb=1|0] [–critical=1|0] [–major=1|0] [–minor=1|0] [–power=1|0] [–chassisid=n] [–all] [–debug] [–help]Descriptionhpialarms walks the RPT (Resource Presence Table) for resources that have “Alarm Control” management…
hpi_shell – An openhpi sample application that allows a user to interactively perform a number of HPI operations. Synopsis hpi_shell [-D nn] [-N host[:port]] [-C <cfgfile>] [-e] [-f <file>] [-X] [-h] hpi_shell [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–events] [–cmdfile=filename] [–debug] [–help]Descriptionhpi_shell reads commands and performs HPI operations based on those commands. This allows it to exercise HPI-managed…
hpftodit – create font description files for use with groff -Tlj4 Synopsis[ -aqs ] [ -i n ] tfm-file map-file output-font -d tfm-file [map-file] –help -v –version Descriptionhpftodit creates a font file for use with a Hewlett-Packard LaserJet~4-series (or newer) printer with groff -Tlj4, using data from an HP tagged font metric (TFM) file. tfm-file…
hpfsck — check integrity of an HFS+ volume Synopsishpfsck [-v] source-path Descriptionhpfsck checks the integrity of an HFS+ volume. With the -v option, the data contained in the volume header is output as well. See alsohfsplus(7), hpmount(1), hpls(1), hpcd(1), hprm(1), hpmkdir(1), hppwd(1), hpcopy(1), hpumount(1). AuthorThis manual page was written by Jens Schmalzing <jensen…
hpcopy — copy files from an HFS+ volume Synopsishpcopy [-m | -b | -t | -r | -a ] source-path … target-path Descriptionhpcopy copies files and directories from an HFS+ volume. If multiple files are to be copied, the target path must be a directory. Since Macintosh files contain two forks, which are not…
hpcd — change directory on an HFS+ volume Synopsishpcd hfs-path Descriptionhpcd changes the current working directory on the previously mounted HFS+ volume. Subsequent commands will interpret filenames relative to this directory. See alsohfsplus(7), hpmount(1), hpls(1), hppwd(1), hprm(1), hpmkdir(1), hpcopy(1), hpumount(1), hpfsck(1). AuthorThis manual page was written by Jens Schmalzing <jensen [at] debian.org> for…
hp2ps – convert a heap profile to a POSTSCRIPT graph Synopsishp2ps [flags] [file][.hp] DescriptionThe program hp2ps converts a heap profile stored in file into a POSTSCRIPT graph, sending the result to file.ps. By convention, files to be processed by hp2ps have a .hp extension. However, for compatibility with older versions of hp2ps, this extension can…
hp-wificonfig – Wifi Configuration Utility DescriptionWifi/Wireless/802.11 configuration utility for HPLIP supported printers. (Note: Only select wireless capable printers are supported by this utility). Synopsishp-wificonfig [DEVICE_URI|PRINTER_NAME] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>OptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run…
hp-unload – Photo Card Access Utility DescriptionAccess inserted photo cards on supported HPLIP printers. This provides an alternative for older devices that do not support USB mass storage or for access to photo cards over a network. Synopsishp-unload [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or…
hp-toolbox – HP Device Manager DescriptionThe HP Device Manager (aka "Toolbox") for HPLIP supported devices. Provides access to status, tools, and supplies levels. Synopsishp-toolbox [OPTIONS] OptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information: -h or –help Disable…
hp-timedate – Time/Date Utility DescriptionSet the time and date on an HP Officejet all-in-one device using the PC time and date. Synopsishp-timedate [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>ModeRun in interactive mode: -i or –interactiveOptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*,…
hp-testpage – Testpage Print Utility DescriptionPrint a tespage to a printer. Prints a summary of device information and shows the printer’s margins. Synopsishp-testpage [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>ModeRun in interactive mode: -i or –interactiveOptionsSet the logging level: -l<level> or –logging=<level> <level>: none,…
hp-systray – System Tray Status Service DescriptionSystem Tray monitors the HP device status and Displays Synopsishp-systray [OPTIONS] OptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information: -h or –help Startup even if no hplip CUPS queues are present:…
hp-setup – Printer/Fax Setup Utility DescriptionInstalls HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of a testpage. Performs basic fax parameter setup. Synopsishp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE] ModeRun in graphical UI mode: -u or –gui (Default) Run in interactive mode: -i…
hp-sendfax – PC Sendfax Utility DescriptionPC send fax for HPLIP supported multifunction printers. Synopsishp-sendfax [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>ModeRun in non-interactive mode: -n or –non-interactiveOptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) This help information: -h…
hp-scan – Scan Utility DescriptionSANE-based scan utility for HPLIP supported all-in-one/mfp devices. Synopsishp-scan [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>ModeRun in interactive mode: -i or –interactiveOptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g…
hp-query – Model Query Utility DescriptionQuery a printer model for static model information. Designed to be called from other processes. Synopsishp-query [MODE] [OPTIONS] ModeRun in non-interactive mode: -n or –non-interactiveOptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information:…
hp-probe – Printer Discovery Utility DescriptionDiscover HPLIP supported USB, parallel, and network attached printers. Synopsishp-probe [OPTIONS] OptionsBus to probe: -b<bus> or –bus=<bus> <bus>: cups, usb*, net, bt, fw, par (*default) (Note: bt and fw not supported in this release.) Set Time to Live (TTL): -t<ttl> or –ttl=<ttl> (Default is 4). Set timeout: -o<timeout in secs.>…
hp-printsettings – Printer Settings Utility DescriptionPrinter settings (options) utility for HPLIP supported printers. Synopsishp-printsettings [DEVICE_URI|PRINTER_NAME] [OPTIONS] Printer|Device-UriTo specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer>OptionsSet the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help…