The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME pmlogsummary – calculate averages of metrics stored in a set of PCP archives SYNOPSIS pmlogsummary [-abfFHiIlmMNsvxyz] [-B nbins] [-n pmnsfile] [-p precision] [-S starttime] [-T endtime] [-Z timezone] archive [metricname …] DESCRIPTION pmlogsummary prints statistical information about metrics of numeric type contained within the files of a set of Performance Co-Pilot (PCP) archive logs….
NAME pmlogrewrite – rewrite Performance Co-Pilot archives SYNOPSIS $PCP_BINADM_DIR/pmlogrewrite [-Cdiqsvw ] [-c config] inlog [outlog] DESCRIPTION pmlogrewrite reads a set of Performance Co-Pilot (PCP) archive logs identified by inlog and creates a PCP archive log in outlog. Under normal usage, the -c option will be used to nominate a configuration file or files that contains…
NAME pmlogreduce – temporal reduction of Performance Co-Pilot archives SYNOPSIS $PCP_BINADM_DIR/pmlogreduce [-z] [-A align] [-S starttime] [-s samples] [-T endtime] [-t interval] [-v volsamples] [-Z timezone] input output DESCRIPTION pmlogreduce reads one set of Performance Co-Pilot (PCP) archives identified by input and creates a temporally reduced PCP archive in output. input is a comma-separated list…
NAME pmlogmv – move (rename) Performance Co-Pilot archive files SYNOPSIS pmlogmv [-NV] oldname newname DESCRIPTION A Performance Co-Pilot (PCP) archive consists of multiple files as created by pmlogger(1). pmlogmv allows all the files of a single PCP archive to be moved or renamed as a group in a single operation. The oldname argument identifies the…
NAME pmloglabel – check and repair a performance metrics archive label SYNOPSIS pmloglabel [-Llsv] [-h hostname] [-p pid] [-V version] [-Z timezone] archive DESCRIPTION pmloglabel verifies, reports on, and can modify all details of the labels in each of the files of a Performance Co-Pilot (PCP) archive log. The archive log has the base name…
NAME pmlogger_check, pmlogger_daily, pmlogger_merge – administration of Performance Co-Pilot archive log files SYNOPSIS $PCP_BINADM_DIR/pmlogger_check [-CNsTV] [-c control] [-l logfile] $PCP_BINADM_DIR/pmlogger_daily [-NorV] [-c control] [-k discard] [-l logfile] [-m addresses] [-s size] [-t want] [-x compress] [-X program] [-Y regex] $PCP_BINADM_DIR/pmlogger_merge [-fNV] [input-basename … output-name] DESCRIPTION This series of shell scripts and associated control files may…
NAME pmlogger – create archive log for performance metrics SYNOPSIS pmlogger [-c configfile] [-h host] [-K spec] [-l logfile] [-L] [-m note] [-n pmnsfile] [-o] [-p pid] [-P] [-r] [-s endsize] [-t interval] [-T endtime] [-u] [-U username] [-v volsize] [-V version] [-x fd] [-y] archive DESCRIPTION pmlogger creates the archive logs of performance metric…
NAME pmlogextract – reduce, extract, concatenate and merge Performance Co-Pilot archives SYNOPSIS pmlogextract [-dfwz] [-c configfile] [-S starttime] [-s samples] [-T endtime] [-v volsamples] [-Z timezone] input […] output DESCRIPTION pmlogextract reads one or more Performance Co-Pilot (PCP) archive logs identified by input and creates a temporally merged and/or reduced PCP archive log in output….
NAME pmlogconf – create/edit a pmlogger configuration file SYNOPSIS pmlogconf [-cqrv] [-d groupsdir] [-h hostname] configfile DESCRIPTION pmlogconf may be used to create and modify a generic configuration file for the PCP archive logger, pmlogger(1). If configfile does not exist, pmlogconf will create a generic configuration file with a default set of enabled metrics and…
NAME pmlogcheck – checks for invalid data in a PCP archive SYNOPSIS pmlogcheck [-lz] [-n pmnsfile] [-S start] [-T finish] [-Z timezone] archive DESCRIPTION pmlogcheck prints information about the nature of any invalid data which it detects in the files of a PCP archive. The archive has the base name archive and must have been…
NAME pmlock – simple file-based mutex SYNOPSIS $PCP_BINADM_DIR/pmlock [ -v ] file DESCRIPTION pmlock attempts to acquire an exclusive lock by creating file with a mode of 0. The exit status is 0 for success, 1 for failure. To release the lock, unlink file. In the event of a failure, the -v option produces an…
NAME pmload – show what files a given module loads at compile time DESCRIPTION Given an argument of a module name, show all the files that are loaded directly or indirectly when the module is used at compile-time. EXAMPLES $ pmload IO::Handle /usr/local/devperl/lib/5.00554/Exporter.pm /usr/local/devperl/lib/5.00554/Carp.pm /usr/local/devperl/lib/5.00554/strict.pm /usr/local/devperl/lib/5.00554/vars.pm /usr/local/devperl/lib/5.00554/i686-linux/DynaLoader.pm /usr/local/devperl/lib/5.00554/i686-linux/IO/Handle.pm /usr/local/devperl/lib/5.00554/Symbol.pm /usr/local/devperl/lib/5.00554/i686-linux/IO/File.pm /usr/local/devperl/lib/5.00554/SelectSaver.pm /usr/local/devperl/lib/5.00554/i686-linux/Fcntl.pm /usr/local/devperl/lib/5.00554/AutoLoader.pm /usr/local/devperl/lib/5.00554/i686-linux/IO.pm /usr/local/devperl/lib/5.00554/i686-linux/IO/Seekable.pm…
NAME pmlc – configure active Performance Co-Pilot pmlogger(s) interactively SYNOPSIS pmlc [-e] [-h host] [-i] [-n pmnsfile] [-P] [-p port] [-Z timezone] [-z] [pid] DESCRIPTION pmlc may be used to change those metrics and instances which a pmlogger(1) writes to a Performance Co-Pilot archive (see PCPIntro(1)), the frequency with which the metrics are collected and…
NAME pmkdir – make directory SYNOPSIS pmkdir [-d LEVEL] [-p DEVNAME] [-h] DIRECTORY DESCRIPTION pmkdir creates a directory on a device connected through SynCE. Forward slashes (‘/’) on the command line are converted to backward slashes (‘\’). OPTIONS -d LEVEL Set debug log level: 0 – No logging (default) 1 – Errors only 2 –…
NAME pminst – find modules whose names match this pattern SYNOPSIS pminst [-s] [-l] [pattern] DESCRIPTION Without arguments, show the names of all installed modules. Given a pattern, show all module names that match it. The -l flag will show the full pathname. The -s flag will separate the base directory from @INC from the…
NAME pminfo – display information about performance metrics SYNOPSIS pminfo [-dfFLmMtTvxz] [-a archive] [-b batchsize] [-c dmfile] [-h hostname] [-K spec] [–[n|N] pmnsfile] [-O time] [-Z timezone] [metricname …] DESCRIPTION pminfo displays various types of information about performance metrics available through the facilities of the Performance Co-Pilot (PCP). Normally pminfo operates on the distributed Performance…
NAME pminclude – show the include path for modules (@INC) DESCRIPTION This is mostly here for people too lazy to type: $ perl -V | tail EXAMPLES $ pminclude /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl SEE ALSO pmls(1), pmpath(1) AUTHORS and COPYRIGHTS Copyright (C) 2013-2014 Mark Leighton Fisher. LICENSE This is free software;…
NAME pmiestatus – display information from pmie stats file SYNOPSIS pmiestatus statsfile […] DESCRIPTION pmiestatus displays information used to identify a running pmie process. It is mostly used by pmie_check and pmie_daily when they hunt for instances of pmie to check against the control file. FILES $PCP_TMP_DIR/pmie/* pmie stats files PCP ENVIRONMENT Environment variables with…
NAME pmieconf – display and set configurable pmie rule variables SYNOPSIS pmieconf [-cFv] [-f file] [-r rulepath] [command [args…]] DESCRIPTION pmieconf is a utility for viewing and configuring variables from generalized pmie(1) rules. The set of generalized rules is read in from rulepath, and the output file produced by pmieconf is a valid input file…
NAME pmie_check, pmie_daily – administration of the Performance Co-Pilot inference engine SYNOPSIS $PCP_BINADM_DIR/pmie_check [-CNsV] [-c control] [-l logfile] $PCP_BINADM_DIR/pmie_daily [-NV] [-c control] [-k discard] [-l logfile] [-m addresses] [-x compress] [-X program] [-Y regex] DESCRIPTION This series of shell scripts and associated control files may be used to create a customized regime of administration and…