The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
megarm – Remove files and folders from your Mega.co.nz account Synopsismegarm <remotepaths>… megarm /Contacts/<contactemail>DescriptionRemoves files and folders from your Mega.co.nz account. NOTE: This command removes folders recursively without asking. Be careful. As a special case, by removing a folder under /Contacts, you’re removing a <contactemail> from your contacts list. Options-u <email>, –username <email> Account username…
megareg – Register new Mega.co.nz account Synopsismegareg [–scripted] –register –email <email> –name <realname> –password <password> megareg [–scripted] –verify <state> <link>DescriptionRegisters new Mega.co.nz account. Registration is split into two steps: 1. –register: Creates a new non-verified account2. –verify: Verifies account with the link that was sent to <email> See example of registration below. Options–register Create new…
megaraid_lsmplugin — LibstorageMgmt MegaRAID plugin DescriptionLibstorageMgmt megaraid plugin allows user to manage LSI MegaRAID via vendor tool storcli[1] or Dell PERC via perccli[2]. The ‘megaraid_lsmplugin’ executable file is for libStorageMgmt daemon to execute when client user specifies megaraid plugin in the URI. Extra SELinux actions are required to allowing plugin access the hardware. When both…
megaput – upload files to your Mega.co.nz account Synopsismegaput [–no-progress] [–path <remotepath>] <paths>…DescriptionUploads files to your Mega.co.nz account. NOTE: If you want to upload entire directories, use megasync(1). Options–path <remotepath> Remote path to upload to. If this path is a directory, files are placed into the directory. If this path doesn’t exist, and it’s parent…
megamv – move or rename files or folders on your Mega.co.nz account Synopsismegamv <srcpaths>… <destpath>DescriptionMoves or renames files or folders on your Mega.co.nz account. NOTE: This tool is not implemented yet! Options-u <email>, –username <email> Account username (email) -p <password>, –password <password> Account password –config <path> Load configuration from a file –ignore-config-file Disable loading .megarc…
megamkdir – Create remote folder under your Mega.co.nz account Synopsismegamkdir <remotepaths>… megamkdir /Contacts/<contactemail>DescriptionCreates folders on Mega.co.nz. As a special case, by creating a new folder under /Contacts, you’re adding a <contactemail> to your contacts list. Options-u <email>, –username <email> Account username (email) -p <password>, –password <password> Account password –config <path> Load configuration from a file…
megals – List files stored in the cloud Synopsismegals [-e] [-h] [–header] [-l] [-R] [-n] [<remotepaths>…]DescriptionLists files stored on Mega.co.nz, exports public download links. Options–export, -e For all files that are going to be listed, also display public download link with file key. NOTE: Folders export doesn’t work yet. –human, -h Display file sizes in…
megaget – download files from your Mega.co.nz account Synopsismegaget [–no-progress] [–path <path>] <remotepaths>… megaget –path – <remotefile>DescriptionDownloads files from your Mega.co.nz account. NOTE: If you want to download entire directories, use megasync(1). Options–path <path> Local path to download to. If this path is a directory, files are placed into the directory. If this path doesn’t…
megafs – Mount remote filesystem locally via FUSE Synopsismegafs [-o <options>…] [-d] [-f] <mountpoint>DescriptionMounts remote filesystem locally via FUSE. NOTE: Be aware that reading and writing files is not implemented yet. You can only manage directories and remove files. Options-o <options> Additional mount options. Some useful options may be: kernel_cache, auto_cache, allow_other, allow_root, nonempty. -d…
megadl – download exported files and directories from Mega.co.nz Synopsismegadl [–no-progress] [–path <path>] <links>… megadl –path – <filelink>DescriptionDownloads exported files and folders from Mega.co.nz. Handles links like: • https://mega.co.nz/#!7YVWhCzZ!bauBlAkKKvv8hIm-8-qFmGOYS289ToQWN7rGFPzXB_w• https://mega.co.nz/#F!HIlFDajT!HLiVvQQkSe1d0ogxZuaOJg When downloading individual files, these are placed into <path>. When downloading folders, the contents of the folder are placed into directory specified by <path>. To…
megadf – Show total available, used, or free space in the cloud Synopsismegadf [–free|–total|–used] [–mb|–gb|-h]DescriptionShows available, used and free space in the cloud in machine or human readable formats. Options–total Show only total available space (free + used). –free Show only free space. –used Show only used space. –human, -h Display file sizes in a…
MEDUSA – Parallel Network Login Auditor Synopsismedusa [-h host|-H file] [-u username|-U file] [-p password|-P file] [-C file] -M module [OPTIONS] DescriptionMedusa is intended to be a speedy, massively parallel, modular, login brute-forcer. The goal is to support as many services which allow remote authentication as possible. The author considers following items to some of…
mediatomb – UPnP MediaServer Synopsis mediatomb [-i IP address ] [-e interface ] [-p port ] [-c config file ] [-d] [-m home dir ] [-f config dir ] [-P PID file ] [-u user ] [-g group ] [-a path ] [-l logfile ] [-D] [–compile-info] [–version] [-h]DescriptionThis manual page describes the command line parameters for MediaTomb. For a detailed documentation please see the README file which is distributed with MediaTomb or visit http://mediatomb.cc/. Options-i, –ip…
med – NCAR CGM metafile frame editor Synopsismed [ -e command ]* [ -f sfilename ] [ -l local_dir ] [ -V ] [ filename] Descriptionmed is a frame-level, metafile editor designed to resemble syntactically UNIX’s sed(1) and ed(1). med operates on a copy of filename, called a buffer, and overwrites a file only when…
mech-dump – Dumps information about a web page Synopsismech-dump [options] [file|url] Options: –headers Dump HTTP response headers –forms Dump table of forms (default action) –links Dump table of links –images Dump table of images –all Dump all four of the above, in that order –text Dumps the textual part of the web page –user=user Set…
mecab – manual page for mecab of 0.98pre1 Synopsismecab [options] files DescriptionMeCab: Yet Another Part-of-Speech and Morphological Analyzer Copyright(C) 2001-2008 Taku Kudo Copyright(C) 2004-2008 Nippon Telegraph and Telephone Corporation -r, –rcfile=FILE use FILE as resource file -d, –dicdir=DIR set DIR as a system dicdir -u, –userdic=FILE use FILE as a user dictionary -l, –lattice-level=INT lattice…
meandark – CCD dark-frame composition Synopsismeandark [options] source_file … DescriptionThe Meandark program compose a set of dark-fields and performs one dark-field called master-dark. It applies the robust median algorithm to the corresponding pixels to get the resulting value. Applying this function, you can achieve high quality correction frame to reduce the noise. All source frames…
meanbias – CCD bias frame composition Synopsismeanbias [options] source_file … DescriptionThe meanbias program compose a set of bias-fields and performs one bias field called master-bias. It applies the robust median algorithm to the corresponding pixels to get the resulting value. Applying this function, you can achieve high quality correction frame to reduce the noise. All…
me-tv – a digital television (DVB) viewer for GNOME Synopsisme-tv [-?|–help] [-v|–verbose] [-s|–safe-mode] [-m|–minimised] [–disable-epg] [–disable-epg-thread] [–no-screensaver-inhibit] [–devices] [–read-timeout] [–display=DISPLAY] DescriptionMe TV is a GTK desktop application for watching digital television services that use the DVB standard. Me TV works with DVB-T/C/S and ATSC cards that have kernel driver support. Me TV uses the xine…
me-tv – a digital television (DVB) viewer for GNOME Synopsisme-tv [-?|–help] [-v|–verbose] [-s|–safe-mode] [-m|–minimised] [–disable-epg] [–disable-epg-thread] [–no-screensaver-inhibit] [–devices] [–read-timeout] [–display=DISPLAY] DescriptionMe TV is a GTK desktop application for watching digital television services that use the DVB standard. Me TV works with DVB-T/C/S and ATSC cards that have kernel driver support. Me TV uses the xine…