The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
ideviceimagemounter – Mount disk images on the device. Synopsisideviceimagemounter [OPTIONS] IMAGE_FILE IMAGE_SIGNATURE_FILE DescriptionMounts the specified disk image on the device. Options-d, –debug enable communication debugging. -u, –udid UDID target specific device by its 40-digit device UDID. -l, –list list mount information -t, –imagetype NAME the image type to use, default is ‘Developer’ -x, –xml use…
ideviceenterrecovery – Make a device enter recovery mode. Synopsisideviceenterrecovery [OPTIONS] UDID DescriptionMakes a device with the supplied 40-digit UDID enter recovery mode immediately. Options-d, –debug enable communication debugging. -h, –help prints usage information. AuthorsMartin Szulecki Man page written to conform with Debian by Julien Lavergne.
idevicediagnostics – Interact with the diagnostics interface of a device. Synopsisidevicediagnostics [OPTIONS] COMMAND DescriptionInteract with the diagnostics interface of a device which allows to retrive all kinds of information including diagnostics data, mobilegestalt data, remote access to the IORegistry and certain commands like restart, shutdown and sleep. Only available for iOS 4 and later. Accessing…
idevicedebugserverproxy – Remote debugging proxy. Synopsisidevicedebugserverproxy [OPTIONS] PORT DescriptionProxy a debugserver connection from a device for remote debugging. After starting up, clients can connect to PORT and communicate with the remote debugserver using the LLVM remote serial debugging protocol. Thus connecting using LLDB or a LLVM based gdb to this port would allow remote debugging….
idevicedebug – Interact with the debugserver service of a device. Synopsisidevicedebug [OPTIONS] COMMAND DescriptionInteract with the debug service of a device. Currently the only implemented command is "run" and allows execution of developer apps and watch the stdout/stderr of the process. Options-e, –env NAME=VALUE set environment variable NAME to VALUE. -u, –udid UDID target specific…
idevicedate – Display the current date or set it on a device. Synopsisidevicedate [OPTIONS] DescriptionSimple utility to manage the clock on a device. Options-d, –debug enable communication debugging. -u, –udid UDID target specific device by its 40-digit device UDID. -s, –set TIMESTAMP set UTC time described by TIMESTAMP -c, –sync set time of device to…
idevicecrashreport – Retrieve crash reports from a device. Synopsisidevicecrashreport [OPTIONS] DIRECTORY DescriptionSimple utility to move crash reports from a device to a local directory. The utility outputs lines prefixed with either "Link:", "Copy:" or "Move:" depending on whether a symlink was created, a file was copied or moved from the device to the target DIRECTORY….
idevicebackup2 – Create or restore backups for devices running iOS 4 or later. Synopsisidevicebackup2 [OPTIONS] CMD [CMDOPTIONS] DIRECTORY DescriptionCreate or restore backup from the current or specified directory. Options-u, –udid UDID target specific device by its 40-digit device UDID. -s, –source UDID use backup data from device specified by UDID. -i, –interactive request passwords interactively…
idevicebackup – Create or restore backup for devices. Synopsisidevicebackup [OPTIONS] CMD [DIRECTORY] DescriptionCreate or restore backup from the current or specified directory. Options-u, –udid UDID target specific device by its 40-digit device UDID. -d, –debug enable communication debugging. -h, –help prints usage information. Commandsbackup saves a device backup into DIRECTORY. restore restores a device backup…
idevice_id – Prints device name or a list of attached devices. Synopsisidevice_id [OPTIONS] [UDID] DescriptionPrints device name or a list of attached devices. The UDID is a 40-digit hexadecimal number of the device for which the name should be retrieved. Options-l, –list list UDID of all attached devices -d, –debug enable communication debugging. -h, –help…
identify – describes the format and characteristics of one or more image files. Synopsisidentify-im6.q16 [options] input-file OverviewThe identify-im6.q16 program is a member of the ImageMagick-ims6.q16(1) suite of tools. It describes the format and characteristics of one or more image files. It also reports if an image is incomplete or corrupt. The information returned includes the…
identify – describes the format and characteristics of one or more image files. Synopsisidentify-im6.q16 [options] input-file OverviewThe identify-im6.q16 program is a member of the ImageMagick-ims6.q16(1) suite of tools. It describes the format and characteristics of one or more image files. It also reports if an image is incomplete or corrupt. The information returned includes the…
identify – describes the format and characteristics of one or more image files. Synopsisidentify-im6.q16 [options] input-file OverviewThe identify-im6.q16 program is a member of the ImageMagick-ims6.q16(1) suite of tools. It describes the format and characteristics of one or more image files. It also reports if an image is incomplete or corrupt. The information returned includes the…
ident – identify RCS keyword strings in files Synopsisident [ -q ] [ -V ] [ file … ] Descriptionident searches for all instances of the pattern $keyword: text $ in the named files or, if no files are named, the standard input. These patterns are normally inserted automatically by the RCS command co(1), but can also…
idate – A Gregorian/Meladi to/from Hijri/Islamic date converter Synopsisidate [–gregorian yyyymmdd] [–hijri yyyymmdd] [–simple] [–umm_alqura] [–help] DescriptionThe idate program is a Gregorian to Hijri (and vice-versa) date converter. The application uses and offers multiple calculation methods with not all of them agreeing at all times. The reason for this multiplicity is due to not having…
id3v2 – Adds/Modifies/Removes/Views id3v2 tags, converts/lists id3v1 tags Synopsisid3v2 [ OPTION ] [ FILE ] Options-h, –help Display help and exit -f, –list-frames Display all possible frames for id3v2 -L, –list-genres Lists all id3v1 genres -v, –version Display version information and exit -l, –list Lists the tag(s) on the file(s) -R, –list-rfc822 Lists using an…
id3tag – Tags an mp3 file with id3v1 and/or id3v2 tags. Synopsisid3tag [ OPTION ]… [ FILE ]… DescriptionId3tag will render both types of tag by default. Only the last tag type indicated in the option list will be used. Non- rendered will remain unchanged in the original file. Will also parse and convert Lyrics3…
id3info – Display id3 tag information. Synopsisid3info [ OPTION ] [ FILE ] DescriptionId3info displays both the id3v1 and id3v2 tag information for a file. Id3info will not differentiate between the two types of tags. Options-h, –help Display help and exit -v, –version Display version information and exitSee Alsoid3convert(1), id3tag(1), id3v2(1) Authorid3lib was originally designed…
id3cp – Copies tags from one file to another. Synopsisid3cp [ OPTION ]… [ SOURCE ] [ DEST ] DescriptionId3cp copies tags from SOURCE to DEST. Options-1, –v1tag Render only the id3v1 tag -2, –v2tag Render only the id3v2 tag -h, –help Display help and exit -v, –version Display version information and exitSee Alsoid3convert(1), id3info(1),…
id3convert – Converts between id3v1 and id3v2 tags of an mp3 file. Synopsisid3convert [ OPTION ] [ FILE ] DescriptionId3convert converts between id3v1 and id3v2 tags of an mp3 file. Id3convert will render both types of tag by default. Only the last tag type indicated in the option list will be used. Non-rendered tags will…