Linux Manuals

NAME hp-devicesettings – Device Setup Utility DESCRIPTION Device settings utility for HPLIP supported printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-devicesettings [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*,…

NAME hp-config_usb_printer – HP device config using USB DESCRIPTION Udev invokes this tool. Tool detects the plugin, Smart Install (C/DVD-ROM) issues and notifies to logged-in user. Tool also downloads firmware to the device. SYNOPSIS hp-config_usb_printer [OPTIONS] [USB bus:device] OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in…

NAME hp-colorcal – Printer Cartridge Color Calibration Utility DESCRIPTION Perform color calibration on HPLIP supported inkjet printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-colorcal [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or…

NAME hp-clean – Printer Printhead Cleaning Utility DESCRIPTION Printhead cleaning utility for HPLIP supported inkjet printers. SYNOPSIS hp-clean [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none,…

NAME hp-check – Dependency/Version Check Utility DESCRIPTION Checks dependency versions,permissions of HPLIP. (Run as ‘python ./check.py’ from the HPLIP tarball before installation.) SYNOPSIS hp-check [OPTIONS] OPTIONS Compile-time check: -c or –compile Run-time check: -r or –run or –runtime Compile and run-time checks: -b or –both (default) Set the logging level: -l<level> or –logging=<level> <level>: none,…

NAME hp-align – Printer Cartridge Alignment Utility DESCRIPTION Cartridge alignment utility for HPLIP supported inkjet printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-align [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive…

NAME hotspotter – Create CVA image from seamount locations SYNOPSIS hotspotter [tables] rotfile CVAgrid increment region [ upper_age ] [ ] [ ] [ [level] ] [ -bi<binary> ] [ -di<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -o<flags> ] [ -:[i|o] ] Note: No space is allowed between the option flag and the…

NAME gethostname, gethostbyname, gethostbyaddr, getservbyname – get local host information SYNTAX $SGE_ROOT/utilbin/$ARCH/gethostname [-help|-name|-aname|-all] $SGE_ROOT/utilbin/$ARCH/gethostbyname [-help|-name|-aname|-all] name $SGE_ROOT/utilbin/$ARCH/gethostbyaddr [-help|-name|-aname|-all] ip $SGE_ROOT/utilbin/$ARCH/getservbyname [-help|-number] service DESCRIPTION gethostname and gethostbyname are used to get the local resolved host name. gethostbyaddr is used to get the hostname of a specified IP address (dotted decimal notation). getservbyname can be used to get the configured port…

NAME hostnamectl – Control the system hostname SYNOPSIS hostnamectl [OPTIONS…] {COMMAND} DESCRIPTION hostnamectl may be used to query and change the system hostname and related settings. systemd-hostnamed.service(8) and this tool distinguish three different hostnames: the high-level "pretty" hostname which might include all kinds of special characters (e.g. "Lennart’s Laptop"), the "static" hostname which is the…

NAME hostname – show or set the system’s host name domainname – show or set the system’s NIS/YP domain name ypdomainname – show or set the system’s NIS/YP domain name nisdomainname – show or set the system’s NIS/YP domain name dnsdomainname – show the system’s DNS domain name SYNOPSIS hostname [-a|–alias] [-d|–domain] [-f|–fqdn|–long] [-A|–all-fqdns] [-i|–ip-address]…

NAME hostid – print the numeric identifier for the current host SYNOPSIS hostid [,OPTION/] DESCRIPTION Print the numeric identifier (in hexadecimal) for the current host. –help display this help and exit –version output version information and exit AUTHOR Written by Jim Meyering. REPORTING BUGS GNU coreutils online help: <https://www.gnu.org/software/coreutils/> Report any translation bugs to <https://translationproject.org/team/>…

NAME hostapd_cli – hostapd command-line interface SYNOPSIS hostapd_cli [-p<path>] [-i<ifname>] [-a<path>] [-hvB] [command..] DESCRIPTION This manual page documents briefly the hostapd_cli utility. hostapd_cli is a command-line interface for the hostapd daemon. hostapd is a user space daemon for access point and authentication servers. It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP Authenticators and RADIUS…

NAME host – DNS lookup utility SYNOPSIS host [-aACdlnrsTUwv] [-c class] [-N ndots] [-p port] [-R number] [-t type] [-W wait] [-m flag] [ [-4] | [-6] ] [-v] [-V] {name} [server] DESCRIPTION host is a simple utility for performing DNS lookups. It is normally used to convert names to IP addresses and vice versa….

NAME holland_cvmysqlsv – Holland Addon for CommVault Support SYNOPSIS holland_cvmysqlsv [–config-file|-c <config-file>] DESCRIPTION holland_cvmysqlsv is a wrapper script that is called by the commvault backup system. This script runs the backup subcommand with no arguments. OPTIONS –config=<file> Read configuration settings from <file>, if it exists. –quiet, -q Terbse output –verbose, -v Verbose output –version, -V…

NAME holland – pluggable database backup agent SYNOPSIS holland [global-options] command [command-options] DESCRIPTION Holland provides a pluggable framework through which to perform database backups. This framework primarily targets MySQL, but there are plans to support other database platforms such as PostgreSQL in the future Holland supports three kinds of plugins currently: • Backup plugins •…

NAME hmt-slam-gui – Robotic Hybrid Metric Topological (HMT) mappping GUI SYNOPSIS hmt-slam-gui DESCRIPTION hmt-slam-gui is a GUI application which allows loading, editing and building complex HMT maps for robotics application. BUGS Please report bugs at http://sourceforge.net/tracker/?group_id=205280&atid=993006 SEE ALSO The application wiki page at http://babel.isa.uma.es/mrpt/index.php/Applications AUTHORS hmt-slam-gui is part of the Mobile Robot Programming Toolkit (MRPT),…

NAME hman – browse the on-line manual pages SYNOPSIS hman [ -P browser ] [ -H host ] [ section ] name hman [ -P browser ] [ -H host ] [ section ] [ index ] DESCRIPTION The hman script is an interface to man2html(1) that allows you to enter man page requests at…

NAME clogin – Cisco login script SYNOPSIS clogin [-autoenable] [-noenable] [-dSV] [-c  command] [-E  var=x] [-e  enable-password] [-f  cloginrc-file] [-p  user-password] [-s  script-file] [-t  timeout] [-u  username] [-v  vty-password] [-w  enable-username] [-x  command-file] [-y  ssh_cypher_type] router [router…] DESCRIPTION clogin is an expect(1) script to automate the process of logging into a Cisco router, Catalyst switch,…

NAME HLint – haskell source code suggestions SYNOPSIS hlint [files/directories] [options] DESCRIPTION HLint is a tool for suggesting possible improvements to Haskell code. These suggestions include ideas such as using alternative functions, simplifying code and spotting redundancies. OPTIONS -? –help Display help message -v –version Display version information -r[file] –report[=file] Generate a report in HTML…

NAME hivexsh – Windows Registry hive shell SYNOPSIS hivexsh[-options][hivefile] DESCRIPTION This program provides a simple shell for navigating Windows Registry ‘hive’ files. It uses the hivex library for access to these binary files. Firstly you will need to provide a hive file from a Windows operating system. The hive files are usually located in "C:\Windows\System32\Config"…