The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME gpsflash – 2-stage firmware loader for GPS chipsets SYNOPSIS gpsflash [-n] [-l loader-file] -f firmware-file {tty} DESCRIPTION This program is a firmware loader for GPSes connected to your host computer via serial or USB port. Presently it supports only SiRF GPSes. Other GPSes may be supported in the future if the vendors cooperate. For operation, this…
NAME gpsfake – test harness for gpsd, simulating a GPS SYNOPSIS gpsfake [-1] [-h] [-b] [-f] [-c interval] [-i] [-D debuglevel] [-l] [-m monitor] [-g] [-n] [-o options] [-p] [-P port] [-r initcmd] [-s speed] [-u] [-t] [-v] [logfile…] DESCRIPTION gpsfake is a test harness for gpsd and its clients. It opens a pty (pseudo-TTY), launches a gpsd instance that thinks the…
NAME gpsdrive – displays GPS position on a map SYNOPSIS gpsdrive [options] About this manual page This manual page explains the basic functions of GpsDrive 2.10 and additional information regarding map setup and interfacing with support software. Within GpsDrive nearly all buttons have tooltips and there is also a HELP window describing the usage of…
NAME gpsdecode – decode GPS, RTCM or AIS streams into a readable format SYNOPSIS gpsdecode [-c] [-d] [-e] [-j] [-s] [-t typelist] [-u] [-v] [-D debuglevel] [-V] DESCRIPTION This tool is a batch-mode decoder for NMEA and various binary packet formats associated with GPS, AIS, and differential-correction services. It produces a JSON dump on standard output from…
NAME gpsd_nmea.sh – switches your gpsd to NMEA mode SYNOPSIS gpsdrive [options] This is needed for some Gps-Receivers with SIF Chip�set. If you don’t switch them into NMEA mode the position will lag about 5-10 seconds behind the reality. AUTHOR J�rg Ostertag http://www.gpsdrive.de WARRANTY This program is distributed in the hope that it will be…
NAME gpsctl – control the modes of a GPS SYNOPSIS gpsctl [-h] [-b | -n] [-x control] [-e] [-f] [-l] [-s speed] [-t devicetype] [-D debuglevel] [-V] [serial-port] DESCRIPTION gpsctl can switch a dual-mode GPS between NMEA and vendor-binary modes. It can also be used to set the device baudrate. Note: Not all devices have these capabilities. If you…
NAME gpscorrelate – correlates digital images with GPS data filling EXIF fields SYNOPSIS gpscorrelate [-z | –timeadd +/-HH[:MM]] [-O | –photooffset seconds] [-i | –no-interpolation] [-v | –verbose] [-d | –datum datum] [-n | –no-write] [-m | –max-dist time] [-t | –ignore-tracksegs] [-M | –no-mtime] [-f | –fix-timestamps] [-p | –degmins] -g file.gpx image.jpg… gpscorrelate -s | –show | -o…
NAME gpscat – dump the output from a GPS SYNOPSIS gpscat [-s speed] [-p] [-t] [-D debuglevel] file-or-serial-port DESCRIPTION gpscat is a simple program for logging and packetizing GPS data streams. It takes input from a specified file or serial device (presumed to have a GPS attached) and reports to standard output. The program runs until end…
NAME gps2udp – feed the take from gpsd to one or more aggregation sites SYNOPSIS gps2udp [-h] [-n] [-j] [-a] [-u hostname:udpport] [-c count] [-d 1|2] [-v] [server [:port [:device]]] DESCRIPTION gps2udp is a tool to connect to gpsd and output the received sentences to one or many UDP host:port destinations. This makes the program useful for feeding…
NAME gps, xgps, xgpsspeed, cgps, lcdgps, gegps – test clients for gpsd SYNOPSIS xgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] xgpsspeed [-D debug-level] [-h] [-V] [–speedunits {[mph] | [kph] | [knots]}] [server [:port [:device]]] cgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-m] [-s] [-u [[i] | [n] | [m]]] [server [:port [:device]]] lcdgps [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] gpxlogger [-D debug-level] [-d] [-e export-method] [-f filename] [-l]…
NAME gprof – display call graph profile data SYNOPSIS gprof [ -[abcDhilLrsTvwxyz] ] [ -[ACeEfFJnNOpPqQRStZ][name] ] [ -I dirs ] [ -d[num] ] [ -k from/to ] [ -m min-count ] [ -R map_file ] [ -t table-length ] [ –[no-]annotated-source[=name] ] [ –[no-]exec-counts[=name] ] [ –[no-]flat-profile[=name] ] [ –[no-]graph[=name] ] [ –[no-]time=name] [ –all-lines ] [ –brief ] [ –debug[=level] ] [ –function-ordering ] [ –file-ordering map_file ] [ –directory-path=dirs ] [ –display-unused-functions ] [ –file-format=name ] [ –file-info ] [ –help ] [ –line ] [ –inline-file-names ] [ –min-count=n ] [ –no-static ] [ –print-path ] [ –separate-files ] [ –static-call-graph ] [ –sum ] [ –table-length=len ] [ –traditional ] [ –version ] [ –width=n ] [ –ignore-non-functions ] [ –demangle[=STYLE] ] [ –no-demangle ] [–external-symbol-table=name] [ image-file ] [ profile-file … ] DESCRIPTION "gprof" produces an execution profile of C, Pascal, or Fortran77 programs. The effect of called routines is incorporated in the profile…
NAME gprocessor – Gnash SWF Processor Synopsis gprocessor (options)… (file)… DESCRIPTION Gprocessor is a debugging tool for SWF files, a companion to Gnash. It is most often used for debugging and running testcases, as it is equivalant to running Gnash with no graphic output. This tool is primarily used by Gnash developers, or anyone who…
NAME gpredict – real-time satellite tracking and orbit prediction program SYNOPSIS gpredict [OPTION]… DESCRIPTION Gpredict is a real-time satellite tracking and orbit prediction program. It can track an unlimited number of satellites and display the satellite data in various visualisation modules like lists, maps and polar plots. Gpredict can also provide detailed information about upcoming…
NAME gpre – Firebird source pre-processor SYNOPSIS gpre [option…] input output DESCRIPTION gpre is a source pre-processor for easier writing of programs working with the raw Firebird API. It supports multiple source languages. Using gpre, you can mix special SQL-like language with the normal program source. OPTIONS -ada Source is an Ada program. -handles package…
NAME gpointing-device-settings – program to configure pointing devices SYNOPSIS gpointing-device-settings [options] DESCRIPTION This manual page documents briefly the gpointing-device-settings command. gpointing-device-settings is a program that allow you to control pointing devices in X session. OPTIONS This program only accepts standard Gtk options and nothing on his own. SEE ALSO http://live.gnome.org/GPointingDeviceSettings AUTHOR gpointing-device-settings was written by…
NAME gpodder – A Media aggregator and Podcast catcher SYNOPSIS gpodder [options] DESCRIPTION gPodder enables you to subscribe to RSS feeds and download podcast episodes from these feeds. Downloaded podcasts can either be synchronized to portable MP3 players (including iPods) or played back on the user’s desktop. See gpo(1) for the command-line interface. OPTIONS –version…
NAME gpodder-backup – Backup and restore utility for gPodder user data SYNOPSIS gpodder-backup [–create|–extract] <archive.gpo.tar.gz> [options] gpodder-backup –purge DESCRIPTION This utility can be used to create a dump of the current gPodder data (configuration files + downloads), optionally skipping the real contents of the download folder (for submitting your data to a bug report without…
NAME gpmetis – Partitions a graph into a specified number of parts. SYNOPSIS gpmetis [options] graphfile nparts DESCRIPTION Required parameters graphfile Stores the graph to be partitioned. nparts The number of partitions to split the graph. Optional parameters -ptype=string Specifies the scheme to be used for computing the k-way partitioning. The possible values are: rb…
NAME gpm-root – a default handler for gpm, used to draw menus on the root window SYNOPSIS gpm-root [ options ] DESCRIPTION The program gpm-root is designed to handle Control-Mouse events to draw menus on the background of the current tty. The actual menus are described by a configuration file in the user’s home directory….
NAME gplink – GNU PIC linker SYNOPSIS gplink [options] [objects] [libraries] WARNING The information in this man page is an extract from the full documentation of gputils and is limited to the meaning of the options. For complete and current documentation, refer to "gputils.ps" located in the gputils docs directory. DESCRIPTION gplink combines a number…