The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME gdcm2vtk – .TH "gdcm2vtk" 1 "Fri Oct 29 2010" "Version 2.0.16" "GDCM" NAME gdcm2vtk – .SH "SYNOPSIS" gdcm2vtk [options] file-in file-out DESCRIPTION The gdcm2vtk takes as input any file supported by VTK (including DICOM file) and will generate as output a DICOM file. PARAMETERS file-in input filename (DICOM or VTK supported) file-out DICOM output…
NAME gdc – Client utility for GoodData on-demand Business Intelligence platform SYNOPSIS gdc [global options] <command> [command options] DESCRIPTION gdc is the command-line and interactive client for GoodData REST-ful service API built on top of WWW::GoodData client library. OPTIONS -h, –help Print a brief help message and exits. -H, –man Prints the manual page and…
NAME gdbus – Tool for working with D-Bus objects SYNOPSIS gdbus introspect [–system | –session | –address address] –dest bus_name –object-path /path/to/object [–xml] [–recurse] [–only-properties] gdbus monitor [–system | –session | –address address] –dest bus_name [–object-path /path/to/object] gdbus call [–system | –session | –address address] –dest bus_name –object-path /path/to/object –method org.project.InterfaceName.MethodName [–timeout seconds | –interactive] ARG1 ARG2… gdbus emit [–system | –session | –address address] –object-path /path/to/object –signal org.project.InterfaceName.SignalName…
NAME gdbus-codegen – D-Bus code and documentation generator SYNOPSIS gdbus-codegen [-h, –help] [–interface-prefix org.project.Prefix] [–generate-c-code OUTFILES] [–c-namespace YourProject] [–c-generate-object-manager] [–c-generate-autocleanup none|objects|all] [–output-directory OUTDIR] [–generate-docbook OUTFILES] [–pragma-once] [–xml-files FILE] [–header] [–body] [–interface-info-header] [–interface-info-body] [–output OUTFILE] [–annotate ELEMENT KEY VALUE]… [–glib-min-required VERSION] [–glib-max-allowed VERSION] FILE [FILE…] DESCRIPTION gdbus-codegen is used to generate code and/or documentation for one or more D-Bus interfaces. gdbus-codegen reads m[blue]D-Bus Introspection XMLm[][1] from files passed as additional…
NAME gdb – The GNU Debugger SYNOPSIS gdb [-help] [-nx] [-q] [-batch] [-cd=dir] [-f] [-b bps] [-tty=dev] [-s symfile] [-e prog] [-se prog] [-c core] [-x cmds] [-d dir] [prog[core|procID]] DESCRIPTION The purpose of a debugger such as GDB is to allow you to see what is going on “inside” another program while it executes—or what…
NAME gdbserver – Remote Server for the GNU Debugger SYNOPSIS gdbserver comm prog [args…] gdbserver –attach comm pid gdbserver –multi comm DESCRIPTION gdbserver is a program that allows you to run GDB on a different machine than the one which is running the program being debugged. Usage (server (target) side): First, you need to have…
NAME gdbmtool – examine and modify a GDBM database SYNOPSIS gdbmtool [-lmNnqrs] [-b SIZE] [-c SIZE] [-f FILE] [–block-size=SIZE] [–cache-size=SIZE] [–file FILE] [–newdb] [–no-lock] [–no-mmap] [–norc] [–quiet] [–read-only] [–synchronize] [DBFILE] gdbmtool [-Vh] ][–help] [–usage] [–version] DESCRIPTION The gdbmtool utility allows you to view and modify an existing GDBM database or to create a new one. The DBFILE argument supplies the name of the database to…
NAME gdbm_load – re-create a GDBM database from a dump file. SYNOPSIS gdbm_load [-Mnr] [-b NUM] [-c NUM] [-m MODE] [-u NAME|UID[:NAME|GID]] [–block-size=NUM] [–cache-size=NUM] [–mmap=NUM] [–mode=MODE] [–no-meta] [–replace] [–user=NAME|UID[:NAME|GID]] FILE [DB_FILE] gdbm_load [-Vh] [–help] [–usage] [–version] DESCRIPTION Create a gdbm database file DB_FILE from the dump file FILE. If the FILE argument is not supplied, output the created database to the standard error….
NAME gdbm_dump – dump a GDBM database to a file SYNOPSIS gdbm_dump [-H FMT] [–format=FMT] DB_FILE [FILE] gdbm_dump [-Vh] [–help] [–usage] [–version] DESCRIPTION The gdbm_dump utility creates a dump of the specified gdbm(3) database file. The name for the output dump file is supplied by the second argument (FILE). If not specified, the output goes…
NAME gdb – The GNU Debugger SYNOPSIS gdb [OPTIONS] [prog|prog procID|prog core] DESCRIPTION The purpose of a debugger such as GDB is to allow you to see what is going on “inside” another program while it executes — or what another program was doing at the moment it crashed. GDB can do four main kinds…
NAME gdb-add-index – Add index files to speed up GDB SYNOPSIS gdb-add-index filename DESCRIPTION When GDB finds a symbol file, it scans the symbols in the file in order to construct an internal symbol table. This lets most GDB operations work quickly—at the cost of a delay early on. For large programs, this delay can…
NAME gdalwarp – gdalwarp image reprojection and warping utility SYNOPSIS gdalwarp[–help – general][–formats] [-s_srs srs_def][-t_srs srs_def][-to “NAME=VALUE”] [-order n | -tps | -rpc | -geoloc][-et err_threshold] [-refine_gcps tolerance[minimum_gcps]] [-te xmin ymin xmax ymax][-tr xres yres][-tap][-ts width height] [-wo “NAME=VALUE”][-ot Byte / Int16 / …][-wt Byte / Int16] [-srcnodata “value [value…]”][-dstnodata “value [value…]”] – dstalpha [-r…
NAME gdaltransform – gdaltransform transforms coordinates SYNOPSIS gdaltransform[–help – general] [-i][-s_srs srs_def][-t_srs srs_def][-to “NAME=VALUE”] [-order n][-tps][-rpc][-geoloc] [-gcp pixel line easting northing[elevation]] * [srcfile[dstfile]] DESCRIPTION The gdaltransform utility reprojects a list of coordinates into any supported projection,including GCP-based transformations. -s_srs srs def: source spatial reference set. The coordinate systems that can be passed are anything supported…
NAME gdaltindex – gdaltindex Builds a shapefile as a raster tileindex SYNOPSIS gdaltindex [-f format] [-tileindex field_name] [-write_absolute_path] [-skip_different_projection] [-t_srs target_srs] [-src_srs_name field_name] [-src_srs_format [AUTO|WKT|EPSG|PROJ] [-lyr_name name] index_file [gdal_file]* DESCRIPTION This program builds a shapefile with a record for each input raster file, an attribute containing the filename, and a polygon geometry outlining the raster….
NAME gdalsrsinfo – gdalsrsinfo lists info about a given SRS in number of formats (WKT, PROJ.4, etc.) SYNOPSIS Usage: gdalsrsinfo [options] srs_def srs_def may be the filename of a dataset supported by GDAL/OGR from which to extract SRS information OR any of the usual GDAL/OGR forms (complete WKT, PROJ.4, EPSG:n or a file containing the…
NAME gdalmove – gdalmove.py Transform georeferencing of raster file in place SYNOPSIS gdalmove.py[-s_srs<srs_defn>] – t_srs<srs_defn>[-et<max_pixel_err>] target_file DESCRIPTION The gdalmove.py script transforms the bounds of a raster file from one coordinate system to another, and then updates the coordinate system and geotransform of the file. This is done without altering pixel values at all. It is…
NAME gdalmanage – gdalmanage Identify, delete, rename and copy raster data files SYNOPSIS Usage : gdalmanage mode[-r][-u][-f format] datasetname[newdatasetname] DESCRIPTION The gdalmanage program can perform various operations on raster data files, depending on the chosen mode. This includes identifying raster data types and deleting, renaming or copying the files. mode: Mode of operation identify datasetname:…
NAME gdallocationinfo – gdallocationinfo raster query tool SYNOPSIS Usage : gdallocationinfo[–help – general][-xml][-lifonly][-valonly] [-b band] * [-overview overview_level] [-l_srs srs_def][-geoloc][-wgs84] srcfile[x y] DESCRIPTION The gdallocationinfo utility provide a mechanism to query information about a pixel given it’s location in one of a variety of coordinate systems. Several reporting options are provided. -xml: The output report…
NAME gdalinfo – gdalinfo lists information about a raster dataset SYNOPSIS gdalinfo[–help – general][-mm][-stats][-hist][-nogcp][-nomd] [-norat][-noct][-nofl][-checksum][-proj4] [-listmdd][-mdd domain |`all`] * [-sd subdataset] datasetname DESCRIPTION The gdalinfo program lists various information about a GDAL supported raster dataset. -mm Force computation of the actual min/max values for each band in the dataset. -stats Read and display image statistics….
NAME gdaldem – gdaldem Tools to analyze and visualize DEMs. (since GDAL 1.7.0) SYNOPSIS – To generate a shaded relief map from any GDAL – supported elevation raster: gdaldem hillshade input_dem output_hillshade [-z ZFactor(default = 1)][-s scale * (default = 1)] ” [-az Azimuth(default = 315)][-alt Altitude(default = 45)] [-alg ZevenbergenThorne][-combined] [-compute_edges][-b Band(default = 1)][-of…