The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
oneac – Driver for Oneac UPS equipment Note This man page only documents the hardware-specific features of the oneac driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver supports various Oneac UPS families: • EG (late 80s, early 90s, plug-in serial interface card) • ON (early and mid-90s, plug-in serial interface…
omping – test IP multicast Synopsis [-46CDEFqVv [-c count ] ] [-i interval ] [-M transport_method ] [-m mcast_addr ] [-O op_mode ] [-p port ] [-R rcvbuf ] [-r rate_limit ] [-S sndbuf ] [-T timeout ] [-t ttl ] [-w wait_time ] remote_addr… Description The is program which uses User Datagram Protocol to…
omniNames – omniORB Naming Service Synopsis omniNames [-start <port>] Description omniNames is omniORB’s implementation of the OMG’s COS Naming Service Specification. When started for the first time, omniNames needs to be told which port it should listen on. This is specified with the -start option. Subsequently, omniNames will always determine its port from the log…
omniMapper – Simple proxy for CORBA naming service from omniORB Synopsis omniMapper [options] Description This manual page documents briefly the omniMapper command. omniMapper is a simple daemon which listens on port 2809 (or any other port) and redirects IIOP requets for configured object keys to associated persistent IORs. It can be used to make a…
oidentd – TCP/IP IDENT protocol server Synopsis oidentd [options] [ -dehiImoqSv ] [ -a <host> ] [ -c <charset> ] [ -C <config file> ] [ -f <port> ] [ -p <port> ] [ -P <host> ] [ -o or –other=[<OS string>] ] [ -t or –timeout=<seconds> ] [ -g or –group=<group|GID> ] [ -l…
ods-signerd – OpenDNSSEC Signer Engine daemon Synopsis ods-signerd [-1] [-c FILE] [-d] [-h] [-i] [-v] [-V] Description ods-signerd is part of the OpenDNSSEC software. It will keep your DNS zones continuous signed. For more information, go to http://www.opendnssec.org and visit the Documentation page. Options -1 Run signer engine once, then exit (for debugging purposes). -c…
ods-signer – OpenDNSSEC Signer Engine client Synopsis ods-signer [-h] clear <zone> | flush | queue | reload | running | sign <zone>[–serial<number>] | sign –all | start | stop | update [–all] | update <zone> | retransfer <zone> | verbosity <number> | zones Description ods-signer is part of the OpenDNSSEC software. With this tool, you…
ods-getconf – OpenDNSSEC get configuration values Synopsis ods-getconf [-c FILE] [-h] [-V]expr Description ods-getconf is part of the OpenDNSSEC software. With this tool, you can extract the value of a configuration option by giving the appropriate expression. For more information, go to http://www.opendnssec.org and visit the Documentation page. Options -c FILE Read configuration from file,…
ods-enforcerd – OpenDNSSEC Policy Enforcer daemon Synopsis ods-enforcerd [-c FILE] [-d] [-1] [-p POLICY] [-P PIDFILE] [-v] [-h] Description ods-enforcerd is part of the OpenDNSSEC software. It will enforce any policies that you have set up for zones under the control of OpenDNSSEC (including the generation of keys if configured to). For more information, go…
ods-control – OpenDNSSEC control utility Synopsis ods-control ksm … ods-control hsm … ods-control signer … ods-control start ods-control stop ods-control enforcer start ods-control enforcer stop ods-control enforcer notify Description ods-control is a helper utility which gives a combined interface for different command utilities within OpenDNSSEC. It can also start and stop OpenDNSSEC by controlling the…
oddjobd – privileged operations for unprivileged processes Synopsis oddjobd [-n] [-d] [-p pidfile] [-c configfile] [-S] [-t timeout] Description The oddjobd daemon provides the com.redhat.oddjob service on the system-wide message bus. Each facility which oddjobd provides is provided as a separate D-Bus method. Any method can be invoked by name by any user, subject to…
oddjob_selinux – Security Enhanced Linux Policy for the oddjob processes Description Security-Enhanced Linux secures the oddjob processes via flexible mandatory access control. The oddjob processes execute with the oddjob_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
oddjob_mkhomedir_selinux – Security Enhanced Linux Policy for the oddjob_mkhomedir processes Description Security-Enhanced Linux secures the oddjob_mkhomedir processes via flexible mandatory access control. The oddjob_mkhomedir processes execute with the oddjob_mkhomedir_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ocfs2console – GUI console for OCFS2. Synopsis ocfs2console Description ocfs2console is a GUI front-end for managing OCFS2 volumes. This tool is especially recommended to configure the O2CB cluster. One can also use this tool to format, tune, mount and umount OCFS2 volumes. See Also mkfs.ocfs2(8) fsck.ocfs2(8) tunefs.ocfs2(8) mounted.ocfs2(8) debugfs.ocfs2(8) o2cb(7) Authors Oracle Corporation Copyright Copyright…
ocfs2_hb_ctl – Starts and stops the OCFS2 heartbeat on a given device. Synopsis ocfs2_hb_ctl -S -d device service ocfs2_hb_ctl -S -u uuid service ocfs2_hb_ctl -K -d device service ocfs2_hb_ctl -K -u uuid service ocfs2_hb_ctl -I -d device ocfs2_hb_ctl -I -u uuid ocfs2_hb_ctl -P -d device [-n io_priority] ocfs2_hb_ctl -P -u uuid [-n io_priority] ocfs2_hb_ctl -h…
obex_selinux – Security Enhanced Linux Policy for the obex processes Description Security-Enhanced Linux secures the obex processes via flexible mandatory access control. The obex processes execute with the obex_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
o2image – Copy or restore OCFS2 file system meta-data Synopsis o2image [-r] [-I] device image-file Description o2image copies the OCFS2 file system meta-data from the device to the specified image-file. This image file contains the file system skeleton that includes the inodes, directory names and file names. It does not include any file data. This…
o2cb_ctl – Control program for the O2CB cluster service. Synopsis o2cb_ctl -C -n object -t type [-i] [-a attribute ] o2cb_ctl -D -n object [-u] o2cb_ctl -I [-o-z] -l manager> [-n object>] [-t type] [-a attribute] o2cb_ctl -H [-n object] [-t type>] [-a attribute>] o2cb_ctl -h o2cb_ctl -V Description o2cb_ctl is the control program for…
nx_server_ssh_selinux – Security Enhanced Linux Policy for the nx_server_ssh processes Description Security-Enhanced Linux secures the nx_server_ssh processes via flexible mandatory access control. The nx_server_ssh processes execute with the nx_server_ssh_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…