The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME cptsvg – convert GMT colour palette tables (cpt) to SVG gradients. SYNOPSIS cptsvg [-g geometry] [-h] [-o file] [-p] [-v] [-V] [file] DESCRIPTION The cptsvg utility converts the colour palette table (cpt) files used by GMT(1) to the gradients in the Scalar Vector Graphics (SVG) format. The program will read from stdin if a file is…
NAME cptinfo – print summary information on GMT colour palette table (cpt) files. SYNOPSIS cptinfo [-c] [-h] [-o file] [-p] [-v] [-V] [file] DESCRIPTION The cptinfo utility prints summary information on the colour palette table (cpt) file which is its input. The program will read from stdin if a file is not specified as the final…
NAME cpthsv – modify hue, saturation and colour value of GMT colour palette tables. SYNOPSIS cpthsv -T transform [-h] [-o file] [-v] [-V] [file] DESCRIPTION The cpthsv utility reads the RGB colour palette in the input, converts its colours to the HSV colour-space, modifies these values in some simple ways, then converts back to RGB colour space…
NAME cptcss – create CSS fragment for colouring HTML tables. SYNOPSIS cptcss [-h] [-f format] [-v] [-V] [file] DESCRIPTION The cptcss utility prints a fragment of CSS which can be used to colour the cells of an HTML table, the colours specified by a colour palette table (cpt) file. The cpt file to use is specified…
NAME cptcont – create a continuous GMT colour palette table (cpt) file based on the colours of a non-continuous cpt file. SYNOPSIS cptcont [-h] [-m] [-o file] [-p percent] [-v] [-V] [file] DESCRIPTION The cptcont program converts a (possibly) discontinuous colour palette in the input to a continuous palette in the output. This is achieved by replacing…
NAME cptclip – extract a sub-table from a GMT colour palette table (cpt). SYNOPSIS cptclip -R min/max [-h] [-o file] [-s] [-v] [-V] [file] DESCRIPTION The cptclip utility extracts a sub-table from a cpt format file. The arguments to the mandatory -R option, min/max, are interpreted as the (z) limits of the output unless the -s switch…
NAME cptcat – concatenate GMT colour palette tables. SYNOPSIS cptcat [-h] [-o file] [-v] [-V] file… DESCRIPTION The cptcat utility concatenates two or more GMT colour palette table (cpt) files. The mandatory file arguments specify the input files which may be specified in any order. However, when sorted, the maximum (z-value) of the lower file should…
NAME cppunit-config – script to get information about the installed version of cppunit SYNOPSIS cppunit-config [–prefix[=DIR]] [–exec-prefix[=DIR]] [–version] [–libs] [–cflags] DESCRIPTION cppunit-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use cppunit. It is also used internally to…
NAME cpphs – liberalised cpp-a-like preprocessor for Haskell SYNOPSIS cpphs [FILENAME|OPTION]… DESCRIPTION cpphs is a liberalised re-implementation of cpp (1), the C pre-processor, in and for Haskell. Why re-implement cpp? Rightly or wrongly, the C pre-processor is widely used in Haskell source code. It enables conditional compilation for different compilers, different versions of the same…
NAME cppcheck – Tool for static C/C++ code analysis SYNOPSIS cppcheck [–append=<file>] [–check-config] [–check-library] [-D<id>] [-U<id>] [–enable=<id>] [–error-exitcode=<n>] [–errorlist] [–exitcode-suppressions=<file>] [–file-list=<file>] [–force] [–help] [-I<dir>] [–includes-file=<file>] [–config-exclude=<dir>] [–config-excludes-file=<file>] [–include=<file>] [-i<dir>] [–inconclusive] [–inline-suppr] [-j<jobs>] [-l<load>] [–language=<language>] [–library=<cfg>] [–max-configs=<limit>] [–platform=<type>] [–quiet] [–relative-paths=<paths>] [–report-progress] [–rule=<rule>] [–rule-file=<file>] [–std=<id>] [–suppress=<spec>] [–suppressions-list=<file>] [–template='<text>’] [–verbose] [–version] [–xml] [–xml-version=<version>]] [file or path] … DESCRIPTION…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-Wwarn…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] [-P] [-fno-working-directory] [-x language] [-std=standard] infile outfile Only the most useful options are listed here; see below for the remainder. DESCRIPTION The C preprocessor, often known as cpp, is a macro processor that is used automatically by the C compiler to transform your program…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpp – The C Preprocessor SYNOPSIS cpp [-Dmacro[=defn]…] [-Umacro] [-Idir…] [-iquotedir…] [-M|-MM] [-MG] [-MF filename] [-MP] [-MQ target…] [-MT target…] infile [[-o] outfile] Only the most useful options are given above; see below for a more complete list of preprocessor-specific options. In addition, cpp accepts most gcc driver options, which are not listed here. Refer to the GCC documentation for details. DESCRIPTION The…
NAME cpio – copy files to and from archives SYNOPSIS cpio {-o|–create} [-0acvABLV] [-C BYTES] [-H FORMAT] [-M MESSAGE] [-O [[USER@]HOST:]ARCHIVE] [-F [[USER@]HOST:]ARCHIVE] [–file=[[USER@]HOST:]ARCHIVE] [–format=FORMAT] [–message=MESSAGE] [–null] [–reset-access-time] [–verbose] [–dot] [–append] [–block-size=blocks] [–dereference] [–io-size=BYTES] [–quiet] [–force-local] [–rsh-command=COMMAND] < name-list [> archive] cpio {-i|–extract} [-bcdfmnrtsuvBSV] [-C BYTES] [-E FILE] [-H FORMAT] [-M MESSAGE] [-R [USER][:.][GROUP]] [-I…
NAME cpfind – Feature matching for panoramic stitching SYNOPSIS cpfind [options] -o output_project project.pto cpfind [options] -k i0 -k i1 […] project.pto cpfind [options] –kall project.pto DESCRIPTION cpfind cpfind is a control-point detector for Hugin. It expects a project file as input and writes a project file with control-points on success. It depends on reasonable…
NAME cpdic – User Dictionary Copy Tool SYNOPSIS cpdic [{-cs|-cannaserver} canna-server] [-i|-u user-name] from-dic to-dic DESCRIPTION cpdic copies user dictionary from-dic to to-dic to rewrite dictionary directory file — dics.dir — . If the user dictionary directory does not exist, cpdic creates it and creates dics.dir under it. If the -i option is specified, the…