The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
multipathd – multipath daemon Synopsis multipathd [options] Description The multipathd daemon is in charge of checking for failed paths. When this happens, it will reconfigure the multipath map the path belongs to, so that this map regains its maximum performance and redundancy. This daemon executes the external multipath config tool when events occur. In turn,…
multipath – Device mapper target autoconfig Synopsis multipath [-v verbosity] [-b bindings_file] [-d] [-h|-l|-ll|-f|-t|-F|-B|-c|-q|-r|-r|-a|-A|-w|] [-p failover|multibus|group_by_serial|group_by_prio|group_by_node_name] [device] Description multipath is used to detect multiple paths to devices for fail-over or performance reasons and coalesces them Options -v level verbosity, print all paths and multipaths 0 no output 1 print the created or updated multipath names only, for use…
mtr – a network diagnostic tool Synopsis mtr [-4|-6] [-F FILENAME] [–report] [–report-wide] [–xml] [–gtk] [–curses] [–displaymode MODE] [–raw] [–csv] [–json] [–split] [–no-dns] [–show-ips] [-o FIELDS] [-y IPINFO] [–aslookup] [-i INTERVAL] [-c COUNT] [-s PACKETSIZE] [-B BITPATTERN] [-G GRACEPERIOD] [-Q TOS] [–mpls] [-I NAME] [-a ADDRESS] [-f FIRST-TTL] [-m MAX-TTL] [-U MAX-UNKNOWN] [–udp] [–tcp] [–sctp] [-P PORT] [-L LOCALPORT] [-Z TIMEOUT] [-M MARK] HOSTNAME Description mtr combines the functionality of the traceroute and ping…
Name mtr-packet – send and receive network probes Description mtr-packet is a tool for sending network probes to measure network connectivity and performance. Many network probes can be sent simultaneously by a single process instance of mtr-packet and additional probes can be generated by an instance of mtr-packet which already has network probes in flight….
msgsnarf – sniff chat messages Synopsis msgsnarf [-i interface | -p pcapfile] [[-v] pattern [expression]] Description msgsnarf records selected messages from AOL Instant Messenger, ICQ 2000, IRC, MSN Messenger, or Yahoo Messenger chat sessions. Options -i interface Specify the interface to listen on. -p pcapfile Process packets from the specified PCAP capture file instead of…
mscan_selinux – Security Enhanced Linux Policy for the mscan processes Description Security-Enhanced Linux secures the mscan processes via flexible mandatory access control. The mscan processes execute with the mscan_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mrtg_selinux – Security Enhanced Linux Policy for the mrtg processes Description Security-Enhanced Linux secures the mrtg processes via flexible mandatory access control. The mrtg processes execute with the mrtg_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mpxstats – Multiplexing Monitor Statistics daemon Synopsis mpxstats [options] -p port Description The mpxstats daemon multiplexes xrootd and cmsd monitoring data streams into a single sequential format suitable for ingestion by a monitoring agent (e.g. ganglia, MonaLisa, nagios, etc.). Usage synopsis can be displayed by typing "mpxstats". Complete HTML documentation can be found at http://xrootd.org/doc/prod/xrd_monitoring.htm…
mplayer_selinux – Security Enhanced Linux Policy for the mplayer processes Description Security-Enhanced Linux secures the mplayer processes via flexible mandatory access control. The mplayer processes execute with the mplayer_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mpd_selinux – Security Enhanced Linux Policy for the mpd processes Description Security-Enhanced Linux secures the mpd processes via flexible mandatory access control. The mpd processes execute with the mpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mpcd – ATM MPOA (Multi-Protocol Over ATM) client daemon Synopsis mpcd [ -s Control ATM address ] [ -l Data ATM address ] [ -c MPS control ATM address ] [ -i Interface number ] [ -m MPS MAC address ] [ -L LEC address [ -n ELAN name ] [ -C LECS Address ]]…
mpathpersist Synopsis mpathpersist [OPTIONS] [DEVICE] Description Options: –verbose|-v level verbosity level 0 Critical and error messages 1 Warning messages 2 Informational messages 3 Informational messages with trace enabled –clear|-C PR Out: Clear –device=DEVICE|-d DEVICE query or change DEVICE –help|-h output this usage message –hex|-H output response in hex –in|-i request PR In command –out|-o request…
mpathconf – A tool for configuring device-mapper-multipath Synopsis mpathconf [commands] [options] Description mpathconf is a utility that creates or modifies /etc/multipath.conf. It can enable or disable multipathing and configure some common options. mpathconf can also load the dm_multipath module, start and stop the multipathd daemon, and configure the multipathd service to start automatically or not….
mozilla_selinux – Security Enhanced Linux Policy for the mozilla processes Description Security-Enhanced Linux secures the mozilla processes via flexible mandatory access control. The mozilla processes execute with the mozilla_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mozilla_plugin_selinux – Security Enhanced Linux Policy for the mozilla_plugin processes Description Security-Enhanced Linux secures the mozilla_plugin processes via flexible mandatory access control. The mozilla_plugin processes execute with the mozilla_plugin_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mozilla_plugin_config_selinux – Security Enhanced Linux Policy for the mozilla_plugin_config processes Description Security-Enhanced Linux secures the mozilla_plugin_config processes via flexible mandatory access control. The mozilla_plugin_config processes execute with the mozilla_plugin_config_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
mountstats – Displays various NFS client per-mount statistics Synopsis mountstats [-h|–help] [-v|–version] [-f|–file infile] [-S|–since sincefile] [ [-n|–nfs] | [-r|–rpc] | [-R|–raw] ] [mountpoint]… mountstats iostat [-h|–help] [-v|–version] [-f|–file infile] [-S|–since sincefile] [interval] [count] [mountpoint]… mounstats nfsstat [-h|–help] [-v|–version] [-f|–file infile] [-S|–since sincefile] [-3] [-4] [mountpoint]… Description The mountstats command displays various NFS client statisitics…
mounted.ocfs2 – Detects all OCFS2 volumes on a system. Synopsis mounted.ocfs2 [-d] [-f] [device] Description mounted.ocfs2 is used to detect OCFS2 volume(s) on a system. This tool assumes that the nodes detected on the system are part of the same cluster as the one specified in /etc/ocfs2/cluster.conf. Options -d Lists the OCFS2 volumes along with…
rpc.mountd – NFS mount daemon Synopsis /usr/sbin/rpc.mountd [options] Description The rpc.mountd daemon implements the server side of the NFS MOUNT protocol, an NFS side protocol used by NFS version 2 [RFC1094] and NFS version 3 [RFC1813]. An NFS server maintains a table of local physical file systems that are accessible to NFS clients. Each file…
mountall – Mount filesystems during boot Synopsis mountall [OPTIONS]… Description mountall is an Upstart init(8) helper that mounts filesystems. It reads fstab(5) and supplements the entries found with a set of built-in entries (generally found in /lib/init/fstab) and calls fsck(8), mount(8) and swapon(8) in the correct order to mount filesystems once the underlying devices have…