The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
liebertgxt2 – Driver for Liebert GXT2 UPS, using the ESP2 serial protocol Note This man page only documents the hardware-specific features of the liebertgxt2 driver. For information about the core driver, see nutupsdrv(8). Supported Hardware liebertgxt2 is experimental and will recognize only those models known to work. The driver will report the model it finds…
liebert – Driver for Liebert contact-closure UPS equipment Note This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink")…
liebert-esp2 – Driver for Liebert UPS, using the ESP-II serial protocol Note This man page only documents the hardware-specific features of the liebert-esp2 driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This is an experimental driver. You have been warned. Extra Arguments This driver supports the following optional settings in ups.conf(5): baudrate=num…
libvirtd – libvirtd management daemon Synopsis libvirtd [OPTION]… Description The libvirtd program is the server side daemon component of the libvirt virtualization management system. This daemon runs on host servers and performs required management tasks for virtualized guests. This includes activities such as starting, stopping and migrating guests between host servers, configuring and manipulating networking,…
virtd_selinux – Security Enhanced Linux Policy for the virtd processes Description Security-Enhanced Linux secures the virtd processes via flexible mandatory access control. The virtd processes execute with the virtd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
libra_selinux – Security Enhanced Linux Policy for the libra processes Description File Contexts SELinux requires files to have an extended attribute to define the file type. You can see the context of a file using the -Z option to lsP Policy governs the access confined processes have to these files. SELinux libra policy is very…
libntfs – library for accessing and managing NTFS volumes Overview libntfs is GPL licensed library for accessing and managing NTFS volumes. It is used by ntfsprogs and some other projects. Accessing Encrypted Files Programs that uses libntfs can transparently access encrypted files on NTFS volumes if libntfs was compiled with –enable-crypto option (it depends on…
libntfs-gnomevfs – Module for GNOME VFS that allows access to NTFS filesystems. Overview The GNOME virtual filesystem (VFS) provides universal access to different filesystems. The libntfs-gnomevfs module enables GNOME VFS aware clients to seamlessly utilize the NTFS library libntfs. So you can access an NTFS filesystem without needing to use the NTFS utilities themselves (at…
nss-systemd, libnss_systemd.so.2 – UNIX user and group name resolution for user/group lookup via Varlink Synopsis libnss_systemd.so.2 Description nss-systemd is a plug-in module for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc), providing UNIX user and group name resolution for services implementing the m[blue]User/Group Record Lookup API via Varlinkm[][1], such as…
nss-mymachines, libnss_mymachines.so.2 – Provide hostname resolution for local container instances. Synopsis libnss_mymachines.so.2 Description nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing hostname resolution for containers running locally, that are registered with systemd-machined.service(8). The container names are resolved to IP addresses of the specific container,…
nss-myhostname, libnss_myhostname.so.2 – Provide hostname resolution for the locally configured system hostname. Synopsis libnss_myhostname.so.2 Description nss-myhostname is a plug-in module for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc), primarily providing hostname resolution for the locally configured system hostname as returned by gethostname(2). The precise hostnames resolved by this module…
les, bus – ATM LAN Emulation service demons Synopsis les [-d module] [-m module] [-f configuration_file] bus [-d module] [-m module] [-f configuration_file] Description LE Service consists of three components: LAN Emulation Configuration Server (lecs(8)), LAN Emulation Server (les) and Broadcast and Unknown Server (bus). Les performs the control coordination function for the emulated LAN. LE clients register MAC addresses and/or…
ledmon – Intel(R) LED monitor service for storage enclosures. Synopsis ledmon [OPTIONS] Description The ledmon application is a daemon process used to monitor a state of software RAID devices (md only) or a state of block devices. The state is visualizing on LEDs associated to each slot in an enclosure or a drive bay. There…
ledctl – Intel(R) LED control application for a storage enclosures. Synopsis ledctl [OPTIONS] pattern_name=list_of_devices … Description The ledctl is an user space application designed to control LEDs associated with each slot in an enclosure or a drive bay. The LEDs of devices listed in list_of_devices are set to the given pattern pattern_name and all other…
les, bus – ATM LAN Emulation service demons Synopsis lecs [-l listen_address] [-f configuration_file] [-d ] Description LE Service consists of three components: LAN Emulation Configuration Server (lecs), LAN Emulation Server ( les(8)) and Broadcast and Unknown Server (bus(8)). Lecs implements the distribution of LECs to different emulated LANs. This is done by giving different LAN Emulation Server…
ldif2ldap – Directory Server script for adding entries Synopsis ldif2ldap [-Z serverID] [-D <rootdn>] -w <password> -f <ldifFile> [-P protocol] [-h] Description Performs an import operation over LDAP to the Directory Server. To run this script, the server must be running. Options A summary of options is included below: -Z Server Identifier The server ID…
ldif2db.pl – Directory Server perl script for importing a LDIF file Synopsis ldif2db.pl -n backend [-Z serverID] [-D rootdn] { -w password | -w – | -j filename } [-P protocol] {-s includeSuffix}* [{-x excludeSuffix}*] [-O] [-c chunksize] [-v] [-h] [-g [string]] [-G namespace_id] {-i filename}* Description Imports LDIF file(s) into the server. Either the…
ldif2db – Directory Server script for importing a LDIF file Synopsis ldif2db [-Z serverID] -n backendname {-s includesuffix}* [{-x excludesuffix}*] [-g [string] [-G namespace_id]] {-i ldiffile}* [-c chunksize] [-O] [-E] [-q] [-h] Description Imports a LDIF file. Either the option ‘-n’ or ‘-s’ must be used. The server instance must be stopped prior to running…
lde – a curses based file system viewer/editor for Linux Synopsis lde [options] device Description lde supports the three most popular file systems under Linux at the time of its inception: ext2fs, minix, and xiafs. It also has minimal support for msdos FAT file systems and a nofs system in which case lde will function…
ldconfig_selinux – Security Enhanced Linux Policy for the ldconfig processes Description Security-Enhanced Linux secures the ldconfig processes via flexible mandatory access control. The ldconfig processes execute with the ldconfig_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…