The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
gdisk – Interactive GUID partition table (GPT) manipulator Synopsis gdisk [ -l ] device Description GPT fdisk (aka gdisk) is a text-mode menu-driven program for creation and manipulation of partition tables. It will automatically convert an old-style Master Boot Record (MBR) partition table or BSD disklabel stored without an MBR carrier partition to the newer…
gconfdefaultsm_selinux – Security Enhanced Linux Policy for the gconfdefaultsm processes Description Security-Enhanced Linux secures the gconfdefaultsm processes via flexible mandatory access control. The gconfdefaultsm processes execute with the gconfdefaultsm_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gconfd_selinux – Security Enhanced Linux Policy for the gconfd processes Description Security-Enhanced Linux secures the gconfd processes via flexible mandatory access control. The gconfd processes execute with the gconfd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gconf-schemas – register gconf schemas with the gconf database Synopsis gconf-schemas [–register|unregister|register-all] [schema1] [schema2] […] Description This manual page documents briefly the gconf-schemas command. gconf-schemas is used to register gconf schemas with the gconf database. Options –register register schemas to the GConf database –unregister unregister schemas from the GConf database –register-all clean up the GConf…
gatherd – SBLIM metric collection daemon Synopsis gatherd [argument] Description The gatherd program is a system daemon that collects performance metrics for various components via a set of metric plugins. Raw metric data is forwarded to a seperate repository daemon that is located either locally or remotely (see reposd(8)). The repository destination, location of plugin…
gatherctl – control utility for gatherd Synopsis gatherctl Description gatherctl is a simple shell program for controling the gatherd(8) metric collection daemon. It provides the ability to manipulate the state of the daemon as well as online loading and unloading of metric collection plugins. Commands h print help message s print status of daemon i…
games_srv_selinux – Security Enhanced Linux Policy for the games_srv processes Description Security-Enhanced Linux secures the games_srv processes via flexible mandatory access control. The games_srv processes execute with the games_srv_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
games_selinux – Security Enhanced Linux Policy for the games processes Description Security-Enhanced Linux secures the games processes via flexible mandatory access control. The games processes execute with the games_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gamemoded – daemon that optimises system performance on demand Synopsis gamemoded [OPTIONS…] Description GameMode is a daemon/lib combo for Linux that allows games to request a set of optimisations be temporarily applied to the host OS. The design has a clear cut abstraction between the host daemon and library (gamemoded and libgamemode), and the client…
gamatronic – Driver for Gamatronic UPS equipment Note This man page only documents the hardware-specific features of the gamatronic driver. For information about the core driver, see nutupsdrv(8). Supported Hardware Various – Rebuilt to work with Gamatronic UPS Units, but should recognize any UPS that speaks the SEC protocol at 1200-19200 bps. Extra Arguments This…
fxotune – automatically tune DAHDI FXO channels Synopsis fxotune -i [options] – detect mode fxotune -d [ options ] – dump mode fxotune -s – Startup mode Description fxotune is a script that fine-tune parameters of the FXO modules of the card. It has three modes of operation: Detect mode (-i): it detects and tunes…
fxload – Firmware download to EZ-USB devices Synopsis fxload [ -v ] [ -D devpath ] [ -I hexfile ] [ -2 ] [ -t type ] [ -c config ] [ -s loader ] fxload [ -D devpath ] [ -L link ] [ -m mode ] fxload [ -V ] [ -? ]…
fwsnort – Firewall Snort Synopsis fwsnort [options] Description fwsnort translates Snort rules into iptables rules and generates a shell script that implements the resulting iptables commands. This ruleset allows network traffic that matches Snort signatures (i.e. attacks and other suspicious network behavior) to be logged and/or dropped by iptables directly without putting an interface into…
fwrestart – Re-initialize the firewall rules, disabling firewall shell session is locked out. Synopsis fwrestart Description fwrestart uses terminal auto-response codes to safely re-start firewall rules over a remote shell session. It sends a request to your terminal (xterm, for example), which responds back automatically. When that response is received, ensuring that fwrestart can communicate…
fwknopd – Firewall Knock Operator Daemon Synopsis fwknopd [options] Description fwknopd is the server component for the FireWall Knock Operator, and is responsible for monitoring and processing Single Packet Authorization (SPA) packets that are generated by fwknop clients, modifying a firewall or ACL policy to allow the desired access after authenticating and decrypting a valid…
fwknop_serv – Fwknop server for the TOR network. Description fwknop_serv is a simplisitc TCP server that is only used if SPA packets are sent over the TOR anonymizing network (http://www.torproject.org). Use of this server results in bidirectional communication, so it technically breaks the usual unidirectional nature of the SPA protocol; More informations can be found…
fwknop – Firewall Knock Operator Synopsis fwknop -A <‘proto/ports’> -R|-a|-s -D <‘host’> [options] Description fwknop implements an authorization scheme known as Single Packet Authorization (SPA) for strong service concealment. SPA requires only a single packet which is encrypted, non-replayable, and authenticated via an HMAC in order to communicate desired access to a service that is…
funit – runs frysk’s JUnit testsuite Synopsis funit [-r repeat-count] [–console CONSOLE_LOG=LEVEL] [–log LOG=LEVEL] [–arch arch] [-n] [–stress] [–all] [-e test-spec] [-i test-spec] [test-class …] [-timeout timeout] Description funit runs frysk’s entire JUnit testsuite, or just the specified test-classs. Frysk’s JUnit testsuite, in addition to testing frysk’s internals, tests the stability of the underlying kernel. -r repeat-count Run the JUnit tests repeat-count times….
funit-threads – creates lots and lots of threads Synopsis funit-threads [–clone] [–block] [–loop] {pid} {signal} {seconds} {number-threads} Description A small slave program, used by funit, as part of frysk’s JUnit testsuite. –clone Each thread will repeatedly clone itself (default). –block Each thread will block. –loop Each thread will execute an infinite loop. pid Thread ID…
funit-slave – forks, execs, and clones on receipt of specific signals Synopsis funit-slave Description A small slave program, used by funit as part of frysk’s JUnit testsuite. Examples Run on a 32-bit system. /usr/lib/frysk/funit-slave Run on a 64-bit system. /usr/lib64/frysk/funit-slave See Also frysk(7) funit(8) Bugs Report bugs to m[blue]http:/sources.redhat.com/fryskm[]