The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
exfatfsck – check an exFAT file system Synopsis exfatfsck [ -a | -n | -p | -y ] device exfatfsck [ -V ] Description exfatfsck checks an exFAT file system for errors. It can repair some of them. Command Line Options Command line options available: -a Automatically repair the file system. No user intervention required….
execstack – tool to set, clear, or query executable stack flag of ELF binaries and shared libraries Synopsis execstack [OPTION…] [FILES] Description execstack is a program which sets, clears, or queries executable stack flag of ELF binaries and shared libraries. Linux has in the past allowed execution of instructions on the stack and there are lots…
evtchnd_selinux – Security Enhanced Linux Policy for the evtchnd processes Description Security-Enhanced Linux secures the evtchnd processes via flexible mandatory access control. The evtchnd processes execute with the evtchnd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
everups – Driver for Ever UPS models Note This man page only documents the hardware-specific features of the everups driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver should recognize the NET *-DPC and AP *-PRO models. Extra Arguments This driver does not support any extra settings in the ups.conf(5). Bugs…
eventlogd_selinux – Security Enhanced Linux Policy for the eventlogd processes Description Security-Enhanced Linux secures the eventlogd processes via flexible mandatory access control. The eventlogd processes execute with the eventlogd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
eventlogadm – push records into the Samba event log store Synopsis eventlogadm [-s] [-d] [-h] -o addsource EVENTLOG SOURCENAME MSGFILE eventlogadm [-s] [-d] [-h] -o write EVENTLOG eventlogadm [-s] [-d] [-h] -o dump EVENTLOG RECORD_NUMBER Description This tool is part of the samba(1) suite. eventlogadm is a filter that accepts formatted event log records on standard input and writes them to the Samba event…
etterlog NG-0.7.3 – Log analyzer for ettercap log files Synopsis etterlog [OPTIONS] FILE Description Etterlog is the log analyzer for logfiles created by ettercap. It can handle both compressed (created with -Lc) or uncompressed logfiles. With this tool you can manipulate binary files as you like and you can print data in different ways all…
etterfilter NG-0.7.3 – Filter compiler for ettercap content filtering engine Synopsis etterfilter [OPTIONS] FILE Description The etterfilter utility is used to compile source filter files into binary filter files that can be interpreted by the JIT interpreter in the ettercap(8) filter engine. You have to compile your filter scripts in order to use them in…
ettercap-plugins NG-0.7.3 – A collection of plugins for ettercap Description Ettercap(8) supports loadable modules at runtime. They are called plugins and they come within the source tarball. They are automatically compiled if your system supports them or until you specify the –disable-plugins option to the configure script. Some of older ettercap plugins (roper, banshee, and…
ettercap NG-0.7.3 – Man page for the Ncurses GUI. General Description The curses GUI is quite simple and intuitive. It is menu-driven. Every flag or function can be modified/called through the upper menu. All user messages are printed in the bottom window. If you want to see the old messages, you can scroll the window…
ettercap NG-0.7.3 – A multipurpose sniffer/content filter for man in the middle attacks ***** Important Note ****** Since ettercap NG (formerly 0.7.0), all the options have been changed. Even the target specification has been changed. Please read carefully this man page. Synopsis ettercap [OPTIONS] [TARGET1] [TARGET2] TARGET is in the form MAC/IPs/PORTs where IPs and…
ethtool – query or control network driver and hardware settings Synopsis ethtool devname ethtool -h|–help ethtool –version ethtool -a|–show-pause devname ethtool -A|–pause devname [ autoneg on|off] [rx on|off] [tx on|off] ethtool -c|–show-coalesce devname ethtool -C|–coalesce devname [ adaptive-rx on|off] [adaptive-tx on|off] [rx-usecs N] [rx-frames N] [rx-usecs-irq N] [rx-frames-irq N] [tx-usecs N] [tx-frames N] [tx-usecs-irq N] [tx-frames-irq N] [stats-block-usecs N] [pkt-rate-low N] [rx-usecs-low N] [rx-frames-low N] [tx-usecs-low N] [tx-frames-low N] [pkt-rate-high N] [rx-usecs-high N] [rx-frames-high N] [tx-usecs-high N] [tx-frames-high N]…
ether-wake – A tool to send a Wake-On-LAN "Magic Packet" Synopsis ether-wake [options] Host-ID Description This manual page documents the usage of the ether-wake command. ether-wake is a program that generates and transmits a Wake-On-LAN (WOL) "Magic Packet", used for restarting machines that have been soft-powered-down (ACPI D3-warm state). It generates the standard AMD Magic…
etckeeper – store /etc in git, mercurial, bazaar, or darcs Synopsis etckeeper command [-d directory] Description etckeeper manages /etc be stored in a git, mercurial, bazaar, or darcs repository. By default each of the commands operates on /etc, but a different directory can be specified to operate on a clone of the /etc repository located…
etapro – Driver for ETA UPS equipment Note This man page only documents the hardware-specific features of the etapro driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver supports ETA UPS equipment with the "PRO" option for smart mode. Extra Arguments This driver does not support any extra settings in the…
esi – get or set the end system identifier (ESI) Synopsis esi [itf] esi [-f] esi [itf] esi -V Description esi is used to show or set the end system identifier (ESI, a unique six-byte number corresponding to the MAC address of LAN technologies like Ethernet) of an ATM interface. If the interface number itf is omitted,…
error – Postfix error/retry mail delivery agent Synopsis error [generic Postfix daemon options] Description The Postfix error(8) delivery agent processes delivery requests from the queue manager. Each request specifies a queue file, a sender address, the reason for non-delivery (specified as the next-hop destination), and recipient information. The reason may be prefixed with an RFC…
era_restore – restore era metadata file to device or file. Synopsis era_restore [options] -i {xml file} -o {device|file} Description era_restore restores era metadata created by the respective device-mapper target dumped into an XML formatted (see era_dump(8)) file, which optionally can be preprocessed before the restore to another device or file. If restored to a metadata…
era_invalidate – Provide a list of blocks that have changed since a particular era. Synopsis era_invalidate [options] {device|file} Description era_invalidate examines era metadata and lists blocks that may have changed since a given era. This tool cannot be run on live metadata unless the –metadata-snap option is used. Options -h, –help Print help and exit….
era_dump – dump era metadata from device or file to standard output. Synopsis era_dump [options] {device|file} Description era_dump dumps binary era metadata created by the device-mapper era target on a device or file to standard output for analysis or postprocessing in XML format. XML formated metadata can be fed into era_restore (see era_restore(8)) in order…