The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
ipa-submit Synopsis ipa-submit [-h serverHost] [-H serverURL] [-c cafile] [-C capath] [[-K] | [-t keytab] [-k submitterPrincipal]] [-P principalOfRequest] [-T profile] [csrfile] Description ipa-submit is the helper which certmonger uses to make requests to IPA-based CAs. It is not normally run interactively, but it can be for troubleshooting purposes. The signing request which is to…
dogtag-submit Synopsis dogtag-submit -E EE-URL -A AGENT-URL [-d dbdir] [-n nickname] [-i cainfo] [-C capath] [-c certfile] [-k keyfile] [-p pinfile] [-P pin] [-s serial (hex)] [-D serial (decimal)] [-S state] [-T profile] [-O param=value] [-N | -R] [-o option=value] [-a ] [-u username] [-U userdn] [-W userpassword] [-w userpasswordfile] [-Y userpin] [-y userpinfile] [-v]…
dogtag-ipa-renew-agent-submit Synopsis dogtag-ipa-renew-agent-submit -E EE-URL -A AGENT-URL [-d dbdir] [-n nickname] [-i cainfo] [-C capath] [-c certfile] [-k keyfile] [-p pinfile] [-P pin] [-s serial (hex)] [-D serial (decimal)] [-S state] [-T profile] [-O param=value] [-v] [csrfile] Description dogtag-ipa-renew-agent-submit is the helper which certmonger uses to make certificate renewal requests to Dogtag instances running on…
certmaster-submit Synopsis certmaster-submit [-h serverHost] [-c cafile] [-C capath] [csrfile] Description certmaster-submit is the helper which certmonger uses to make requests to certmaster-based CAs. It is not normally run interactively, but it can be for troubleshooting purposes. The signing request which is to be submitted should either be in a file whose name is given…
certmaster_selinux – Security Enhanced Linux Policy for the certmaster processes Description Security-Enhanced Linux secures the certmaster processes via flexible mandatory access control. The certmaster processes execute with the certmaster_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ceph – ceph administration tool Synopsis ceph auth [ add | caps | del | export | get | get-key | get-or-create | get-or-create-key | import | list | print-key | print_key ] … ceph compact ceph config-key [ del | exists | get | list | put ] … ceph df {detail} ceph fs…
ceph-syn – ceph synthetic workload generator Synopsis ceph-syn [ -m monaddr:port ] –syn command … Description ceph-syn is a simple synthetic workload generator for the Ceph distributed file system. It uses the userspace client library to generate simple workloads against a currently running file system. The file system need not be mounted via ceph-fuse(8) or…
ceph-rbdnamer – udev helper to name RBD devices Synopsis ceph-rbdnamer num Description ceph-rbdnamer prints the pool and image name for the given RBD devices to stdout. It is used by udev (using a rule like the one below) to set up a device symlink. KERNEL=="rbd[0-9]*", PROGRAM="/usr/bin/ceph-rbdnamer %n", SYMLINK+="rbd/%c{1}/%c{2}" Availability ceph-rbdnamer is part of Ceph, a…
ceph-post-file – post files for ceph developers Synopsis ceph-post-file [-d description] [-u *user] file or dir … Description ceph-post-file will upload files or directories to ceph.com for later analysis by Ceph developers. Each invocation uploads files or directories to a separate directory with a unique tag. That tag can be passed to a developer or…
ceph-dencoder – ceph encoder/decoder utility Synopsis ceph-dencoder [commands…] Description ceph-dencoder is a utility to encode, decode, and dump ceph data structures. It is used for debugging and for testing inter-version compatibility. ceph-dencoder takes a simple list of commands and performs them in order. Commands version Print the version string for the ceph-dencoder binary. import <file>…
ceph-conf – ceph conf file tool Synopsis ceph-conf -c conffile –list-all-sections ceph-conf -c conffile -L ceph-conf -c conffile -l prefix ceph-conf key -s section1 … ceph-conf [-s section ] –lookup key ceph-conf [-s section ] key Description ceph-conf is a utility for getting information about a ceph configuration file. As with most Ceph programs, you…
ceph-authtool – ceph keyring manipulation tool Synopsis ceph-authtool keyringfile [ -l | –list ] [ -C | –create-keyring ] [ -p | –print ] [ -n | –name entityname ] [ –gen-key ] [ -a | –add-key base64_key ] [ –caps capfile ] Description ceph-authtool is a utility to create, view, and modify a Ceph…
cdrecord_selinux – Security Enhanced Linux Policy for the cdrecord processes Description Security-Enhanced Linux secures the cdrecord processes via flexible mandatory access control. The cdrecord processes execute with the cdrecord_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
cdcc_selinux – Security Enhanced Linux Policy for the cdcc processes Description Security-Enhanced Linux secures the cdcc processes via flexible mandatory access control. The cdcc processes execute with the cdcc_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ccs_tool – The tool used to make online updates of CCS config files. Synopsis ccs_tool [OPTION].. <command> Description ccs_tool is part of the Cluster Configuration System (CCS). It is used to make online updates to cluster.conf. It can also be used to upgrade old style (GFS <= 6.0) CCS archives to the new xml cluster.conf…
ccs_sync – Cluster Synchronization Utility Synopsis ccs_sync [options] [<host0> [… <hostN>]] Description ccs_sync is used to synchronize the cluster configuration file to one or more machines in a cluster. Options -f <cluster_conf> Specify the path of the cluster.conf file to propagate. -c <NSS certificate DB> Specify the path to the cacert.pem file. -i Increment the…
ccs_selinux – Security Enhanced Linux Policy for the ccs processes Description Security-Enhanced Linux secures the ccs processes via flexible mandatory access control. The ccs processes execute with the ccs_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ccs_config_validate Description Usage: ccs_config_validate [options] Options -h Print this help, then exit -V Print program version information, then exit -v Produce verbose output Validating XML configuraton files: -f configfile Validate an alternate config file without preloading it with default values. -l configfile Validate an alternate config file with preloading of default values (recommended option). Advanced…
ccs_config_dump – Tool to generate XML output of running configuration. Synopsis ccs_config_dump [OPTION].. Description ccs_config_dump is part of the Cluster Configuration System (CCS). It is used to dump the current running configuration in XML format. The running configuration is, sometimes, different from the stored configuration on file or ldap because some subsystems store or set…
cciss_vol_status – show status of logical drives attached to HP Smartarray controllers Synopsis cciss_vol_status [OPTION] [DEVICE]… Description Shows the status of logical drives configured on HP Smartarray controllers. Options -p, –persnickety Without this option, device nodes which can’t be opened, or which are not found to be of the correct device type are silently ignored….