sggesx.f (3)  Linux Manuals
NAME
sggesx.f 
SYNOPSIS
Functions/Subroutines
subroutine sggesx (JOBVSL, JOBVSR, SORT, SELCTG, SENSE, N, A, LDA, B, LDB, SDIM, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, RCONDE, RCONDV, WORK, LWORK, IWORK, LIWORK, BWORK, INFO)
SGGESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Function/Subroutine Documentation
subroutine sggesx (characterJOBVSL, characterJOBVSR, characterSORT, logical, externalSELCTG, characterSENSE, integerN, real, dimension( lda, * )A, integerLDA, real, dimension( ldb, * )B, integerLDB, integerSDIM, real, dimension( * )ALPHAR, real, dimension( * )ALPHAI, real, dimension( * )BETA, real, dimension( ldvsl, * )VSL, integerLDVSL, real, dimension( ldvsr, * )VSR, integerLDVSR, real, dimension( 2 )RCONDE, real, dimension( 2 )RCONDV, real, dimension( * )WORK, integerLWORK, integer, dimension( * )IWORK, integerLIWORK, logical, dimension( * )BWORK, integerINFO)
SGGESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Purpose:

SGGESX computes for a pair of NbyN real nonsymmetric matrices (A,B), the generalized eigenvalues, the real Schur form (S,T), and, optionally, the left and/or right matrices of Schur vectors (VSL and VSR). This gives the generalized Schur factorization (A,B) = ( (VSL) S (VSR)**T, (VSL) T (VSR)**T ) Optionally, it also orders the eigenvalues so that a selected cluster of eigenvalues appears in the leading diagonal blocks of the upper quasitriangular matrix S and the upper triangular matrix T; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right and left deflating subspaces corresponding to the selected eigenvalues (RCONDV). The leading columns of VSL and VSR then form an orthonormal basis for the corresponding left and right eigenspaces (deflating subspaces). A generalized eigenvalue for a pair of matrices (A,B) is a scalar w or a ratio alpha/beta = w, such that A  w*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0 or for both being zero. A pair of matrices (S,T) is in generalized real Schur form if T is upper triangular with nonnegative diagonal and S is block upper triangular with 1by1 and 2by2 blocks. 1by1 blocks correspond to real generalized eigenvalues, while 2by2 blocks of S will be "standardized" by making the corresponding elements of T have the form: [ a 0 ] [ 0 b ] and the pair of corresponding 2by2 blocks in S and T will have a complex conjugate pair of generalized eigenvalues.
Parameters:

JOBVSL
JOBVSL is CHARACTER*1 = 'N': do not compute the left Schur vectors; = 'V': compute the left Schur vectors.
JOBVSRJOBVSR is CHARACTER*1 = 'N': do not compute the right Schur vectors; = 'V': compute the right Schur vectors.
SORTSORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the generalized Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELCTG).
SELCTGSELCTG is procedure) LOGICAL FUNCTION of three REAL arguments SELCTG must be declared EXTERNAL in the calling subroutine. If SORT = 'N', SELCTG is not referenced. If SORT = 'S', SELCTG is used to select eigenvalues to sort to the top left of the Schur form. An eigenvalue (ALPHAR(j)+ALPHAI(j))/BETA(j) is selected if SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) is true; i.e. if either one of a complex conjugate pair of eigenvalues is selected, then both complex eigenvalues are selected. Note that a selected complex eigenvalue may no longer satisfy SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is illconditioned), in this case INFO is set to N+3.
SENSESENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N' : None are computed; = 'E' : Computed for average of selected eigenvalues only; = 'V' : Computed for selected deflating subspaces only; = 'B' : Computed for both. If SENSE = 'E', 'V', or 'B', SORT must equal 'S'.
NN is INTEGER The order of the matrices A, B, VSL, and VSR. N >= 0.
AA is REAL array, dimension (LDA, N) On entry, the first of the pair of matrices. On exit, A has been overwritten by its generalized Schur form S.
LDALDA is INTEGER The leading dimension of A. LDA >= max(1,N).
BB is REAL array, dimension (LDB, N) On entry, the second of the pair of matrices. On exit, B has been overwritten by its generalized Schur form T.
LDBLDB is INTEGER The leading dimension of B. LDB >= max(1,N).
SDIMSDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELCTG is true. (Complex conjugate pairs for which SELCTG is true for either eigenvalue count as 2.)
ALPHARALPHAR is REAL array, dimension (N)
ALPHAIALPHAI is REAL array, dimension (N)
BETABETA is REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. ALPHAR(j) + ALPHAI(j)*i and BETA(j),j=1,...,N are the diagonals of the complex Schur form (S,T) that would result if the 2by2 diagonal blocks of the real Schur form of (A,B) were further reduced to triangular form using 2by2 complex unitary transformations. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B).
VSLVSL is REAL array, dimension (LDVSL,N) If JOBVSL = 'V', VSL will contain the left Schur vectors. Not referenced if JOBVSL = 'N'.
LDVSLLDVSL is INTEGER The leading dimension of the matrix VSL. LDVSL >=1, and if JOBVSL = 'V', LDVSL >= N.
VSRVSR is REAL array, dimension (LDVSR,N) If JOBVSR = 'V', VSR will contain the right Schur vectors. Not referenced if JOBVSR = 'N'.
LDVSRLDVSR is INTEGER The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR = 'V', LDVSR >= N.
RCONDERCONDE is REAL array, dimension ( 2 ) If SENSE = 'E' or 'B', RCONDE(1) and RCONDE(2) contain the reciprocal condition numbers for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'.
RCONDVRCONDV is REAL array, dimension ( 2 ) If SENSE = 'V' or 'B', RCONDV(1) and RCONDV(2) contain the reciprocal condition numbers for the selected deflating subspaces. Not referenced if SENSE = 'N' or 'E'.
WORKWORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORKLWORK is INTEGER The dimension of the array WORK. If N = 0, LWORK >= 1, else if SENSE = 'E', 'V', or 'B', LWORK >= max( 8*N, 6*N+16, 2*SDIM*(NSDIM) ), else LWORK >= max( 8*N, 6*N+16 ). Note that 2*SDIM*(NSDIM) <= N*N/2. Note also that an error is only returned if LWORK < max( 8*N, 6*N+16), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. If LWORK = 1, then a workspace query is assumed; the routine only calculates the bound on the optimal size of the WORK array and the minimum size of the IWORK array, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA.
IWORKIWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the minimum LIWORK.
LIWORKLIWORK is INTEGER The dimension of the array IWORK. If SENSE = 'N' or N = 0, LIWORK >= 1, otherwise LIWORK >= N+6. If LIWORK = 1, then a workspace query is assumed; the routine only calculates the bound on the optimal size of the WORK array and the minimum size of the IWORK array, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA.
BWORKBWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'.
INFOINFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. (A,B) are not in Schur form, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: =N+1: other than QZ iteration failed in SHGEQZ =N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Generalized Schur form no longer satisfy SELCTG=.TRUE. This could also be caused due to scaling. =N+3: reordering failed in STGSEN.
Author:

Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
 November 2011
Further Details:

An approximate (asymptotic) bound on the average absolute error of the selected eigenvalues is EPS * norm((A, B)) / RCONDE( 1 ). An approximate (asymptotic) bound on the maximum angular error in the computed deflating subspaces is EPS * norm((A, B)) / RCONDV( 2 ). See LAPACK User's Guide, section 4.11 for more information.
Definition at line 363 of file sggesx.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.