zposvx (3) - Linux Manuals

NAME

zposvx.f -

SYNOPSIS


Functions/Subroutines


subroutine zposvx (FACT, UPLO, N, NRHS, A, LDA, AF, LDAF, EQUED, S, B, LDB, X, LDX, RCOND, FERR, BERR, WORK, RWORK, INFO)
ZPOSVX computes the solution to system of linear equations A * X = B for PO matrices

Function/Subroutine Documentation

subroutine zposvx (characterFACT, characterUPLO, integerN, integerNRHS, complex*16, dimension( lda, * )A, integerLDA, complex*16, dimension( ldaf, * )AF, integerLDAF, characterEQUED, double precision, dimension( * )S, complex*16, dimension( ldb, * )B, integerLDB, complex*16, dimension( ldx, * )X, integerLDX, double precisionRCOND, double precision, dimension( * )FERR, double precision, dimension( * )BERR, complex*16, dimension( * )WORK, double precision, dimension( * )RWORK, integerINFO)

ZPOSVX computes the solution to system of linear equations A * X = B for PO matrices

Purpose:

 ZPOSVX uses the Cholesky factorization A = U**H*U or A = L*L**H to
 compute the solution to a complex system of linear equations
    A * X = B,
 where A is an N-by-N Hermitian positive definite matrix and X and B
 are N-by-NRHS matrices.

 Error bounds on the solution and a condition estimate are also
 provided.


 

Description:

 The following steps are performed:

 1. If FACT = 'E', real scaling factors are computed to equilibrate
    the system:
       diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B
    Whether or not the system will be equilibrated depends on the
    scaling of the matrix A, but if equilibration is used, A is
    overwritten by diag(S)*A*diag(S) and B by diag(S)*B.

 2. If FACT = 'N' or 'E', the Cholesky decomposition is used to
    factor the matrix A (after equilibration if FACT = 'E') as
       A = U**H* U,  if UPLO = 'U', or
       A = L * L**H,  if UPLO = 'L',
    where U is an upper triangular matrix and L is a lower triangular
    matrix.

 3. If the leading i-by-i principal minor is not positive definite,
    then the routine returns with INFO = i. Otherwise, the factored
    form of A is used to estimate the condition number of the matrix
    A.  If the reciprocal of the condition number is less than machine
    precision, INFO = N+1 is returned as a warning, but the routine
    still goes on to solve for X and compute error bounds as
    described below.

 4. The system of equations is solved for X using the factored form
    of A.

 5. Iterative refinement is applied to improve the computed solution
    matrix and calculate error bounds and backward error estimates
    for it.

 6. If equilibration was used, the matrix X is premultiplied by
    diag(S) so that it solves the original system before
    equilibration.


 

Parameters:

FACT

          FACT is CHARACTER*1
          Specifies whether or not the factored form of the matrix A is
          supplied on entry, and if not, whether the matrix A should be
          equilibrated before it is factored.
          = 'F':  On entry, AF contains the factored form of A.
                  If EQUED = 'Y', the matrix A has been equilibrated
                  with scaling factors given by S.  A and AF will not
                  be modified.
          = 'N':  The matrix A will be copied to AF and factored.
          = 'E':  The matrix A will be equilibrated if necessary, then
                  copied to AF and factored.


UPLO

          UPLO is CHARACTER*1
          = 'U':  Upper triangle of A is stored;
          = 'L':  Lower triangle of A is stored.


N

          N is INTEGER
          The number of linear equations, i.e., the order of the
          matrix A.  N >= 0.


NRHS

          NRHS is INTEGER
          The number of right hand sides, i.e., the number of columns
          of the matrices B and X.  NRHS >= 0.


A

          A is COMPLEX*16 array, dimension (LDA,N)
          On entry, the Hermitian matrix A, except if FACT = 'F' and
          EQUED = 'Y', then A must contain the equilibrated matrix
          diag(S)*A*diag(S).  If UPLO = 'U', the leading
          N-by-N upper triangular part of A contains the upper
          triangular part of the matrix A, and the strictly lower
          triangular part of A is not referenced.  If UPLO = 'L', the
          leading N-by-N lower triangular part of A contains the lower
          triangular part of the matrix A, and the strictly upper
          triangular part of A is not referenced.  A is not modified if
          FACT = 'F' or 'N', or if FACT = 'E' and EQUED = 'N' on exit.

          On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
          diag(S)*A*diag(S).


LDA

          LDA is INTEGER
          The leading dimension of the array A.  LDA >= max(1,N).


AF

          AF is COMPLEX*16 array, dimension (LDAF,N)
          If FACT = 'F', then AF is an input argument and on entry
          contains the triangular factor U or L from the Cholesky
          factorization A = U**H *U or A = L*L**H, in the same storage
          format as A.  If EQUED .ne. 'N', then AF is the factored form
          of the equilibrated matrix diag(S)*A*diag(S).

          If FACT = 'N', then AF is an output argument and on exit
          returns the triangular factor U or L from the Cholesky
          factorization A = U**H *U or A = L*L**H of the original
          matrix A.

          If FACT = 'E', then AF is an output argument and on exit
          returns the triangular factor U or L from the Cholesky
          factorization A = U**H *U or A = L*L**H of the equilibrated
          matrix A (see the description of A for the form of the
          equilibrated matrix).


LDAF

          LDAF is INTEGER
          The leading dimension of the array AF.  LDAF >= max(1,N).


EQUED

          EQUED is CHARACTER*1
          Specifies the form of equilibration that was done.
          = 'N':  No equilibration (always true if FACT = 'N').
          = 'Y':  Equilibration was done, i.e., A has been replaced by
                  diag(S) * A * diag(S).
          EQUED is an input argument if FACT = 'F'; otherwise, it is an
          output argument.


S

          S is DOUBLE PRECISION array, dimension (N)
          The scale factors for A; not accessed if EQUED = 'N'.  S is
          an input argument if FACT = 'F'; otherwise, S is an output
          argument.  If FACT = 'F' and EQUED = 'Y', each element of S
          must be positive.


B

          B is COMPLEX*16 array, dimension (LDB,NRHS)
          On entry, the N-by-NRHS righthand side matrix B.
          On exit, if EQUED = 'N', B is not modified; if EQUED = 'Y',
          B is overwritten by diag(S) * B.


LDB

          LDB is INTEGER
          The leading dimension of the array B.  LDB >= max(1,N).


X

          X is COMPLEX*16 array, dimension (LDX,NRHS)
          If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to
          the original system of equations.  Note that if EQUED = 'Y',
          A and B are modified on exit, and the solution to the
          equilibrated system is inv(diag(S))*X.


LDX

          LDX is INTEGER
          The leading dimension of the array X.  LDX >= max(1,N).


RCOND

          RCOND is DOUBLE PRECISION
          The estimate of the reciprocal condition number of the matrix
          A after equilibration (if done).  If RCOND is less than the
          machine precision (in particular, if RCOND = 0), the matrix
          is singular to working precision.  This condition is
          indicated by a return code of INFO > 0.


FERR

          FERR is DOUBLE PRECISION array, dimension (NRHS)
          The estimated forward error bound for each solution vector
          X(j) (the j-th column of the solution matrix X).
          If XTRUE is the true solution corresponding to X(j), FERR(j)
          is an estimated upper bound for the magnitude of the largest
          element in (X(j) - XTRUE) divided by the magnitude of the
          largest element in X(j).  The estimate is as reliable as
          the estimate for RCOND, and is almost always a slight
          overestimate of the true error.


BERR

          BERR is DOUBLE PRECISION array, dimension (NRHS)
          The componentwise relative backward error of each solution
          vector X(j) (i.e., the smallest relative change in
          any element of A or B that makes X(j) an exact solution).


WORK

          WORK is COMPLEX*16 array, dimension (2*N)


RWORK

          RWORK is DOUBLE PRECISION array, dimension (N)


INFO

          INFO is INTEGER
          = 0: successful exit
          < 0: if INFO = -i, the i-th argument had an illegal value
          > 0: if INFO = i, and i is
                <= N:  the leading minor of order i of A is
                       not positive definite, so the factorization
                       could not be completed, and the solution has not
                       been computed. RCOND = 0 is returned.
                = N+1: U is nonsingular, but RCOND is less than machine
                       precision, meaning that the matrix is singular
                       to working precision.  Nevertheless, the
                       solution and error bounds are computed because
                       there are a number of situations where the
                       computed solution can be more accurate than the
                       value of RCOND would suggest.


 

Author:

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Date:

April 2012

Definition at line 305 of file zposvx.f.

Author

Generated automatically by Doxygen for LAPACK from the source code.