control.ctl (5) - Linux Man Pages
control.ctl: Specify handling of Usenet control messages
control.ctl - Specify handling of Usenet control messages
DESCRIPTIONThe file pathetc/control.ctl is used to determine what action is taken when a control message is received. It is read by controlchan, which is normally invoked as a channel program by innd. When control.ctl is modified, controlchan notices this automatically and reloads it.
If a control.ctl.local file exists in pathetc, it is read by controlchan after control.ctl (the resulting behaviour is as though the contents of control.ctl.local were at the end of control.ctl). This local file is formatted like control.ctl and is intended to contain local customization. It is also automatically reloaded when modified.
Blank lines and lines beginning with a number sign ("#") are ignored. All other lines should consist of four fields separated by colons:
Lines are matched in order and the last matching line in the file will be used, except for checkgroups messages which are handled differently (every matching line is used).
The first field, <type>, is the type of control message for which this line is valid. It should either be the name of a control message or the word "all" to indicate that it applies to all control messages. Besides, the following special types are understood:
This type specifies the encoding of newgroup and checkgroups control
messages so that new descriptions could be decoded the right way.
means that a description for a newsgroup in the Chinese cn.* hierarchy will be decoded as though it were encoded in GB18030, unless a charset is specified in the control message (in such a case, the charset mentioned in the message is used). However, it is possible to override the mentioned charset if "=force" is appended after the encoding. For instance,
means that the description for scout.forum.chinese will always be decoded as though it were encoded in Big5, no matter the charset of the corresponding control message.
The default value when no encoding is mentioned (or when the specified encoding is unknown) is "CP1252".
The last matching line for a given newsgroup name in control.ctl will be used.
When this type is used, the line consist of only two fields. The default
value when this type does not appear in control.ctl (or when the
specified charset is unknown) is equivalent to:
It means that new descriptions in the newsgroups file will be written using UTF-8. And controlchan will try to read existing descriptions, so as to see whether they should be updated, as though they were encoded in UTF-8.
The last matching line in control.ctl will be used.
This type specifies the maximum number of changes that could be made
at one time by a checkgroups before bailing and mailing the changes
to the admin if no log file was specified. The default value is 10.
Such a configuration means that a checkgroups containing 15 changes for the French fr.* hierarchy (newgroups to add, remove or change the status) will be automatically honoured whereas a checkgroups containing 15 changes for france.* will only have the required changes mailed or logged.
The last matching line for a given newsgroup name in control.ctl will be used.
The second field, <from>, is a shell-style pattern that matches the e-mail address of the person posting the message (with the address first converted to lowercase). The matching is done with rules equivalent to those of the shell's case statement; see sh(1) for more details.
If the control message is a newgroup or rmgroup, the third field, <newsgroups>, is a shell-style pattern matching the newsgroup affected by the control message (especially "?" matches exactly one character, "*" matches zero or more characters and "|" permits to match several patterns on the same line -- for instance "comp.*|humanities.*" matches every newsgroup whose name begins with "comp." or "humanities."). If the control message is a checkgroups, the third field is a shell-style pattern matching the newsgroups that should be processed for checking. If the control message is of any other type, the third field is ignored.
The fourth field, <action>, specifies what action to take with control messages that match this line. The following actions are understood:
The action requested by the control message should be performed. It
means that the change will be silently performed. For checkgroups messages,
depending on the value of /maxdocheckgroups/, the shell commands that
should be run may be mailed to the news administrator (the argument to
--with-news-master given at configure time, "usenet" by default)
instead of being performed.
If you always want notification of actions taken, use "doit=mail" instead (see below).
If the control message has an argument, this is equivalent to doit. If
it does not have an argument, this is equivalent to mail. This is only
useful for entries for sendsys control messages, allowing a site to
request its own newsfeeds entry by posting a "sendsys mysite" control
message, but not allowing the entire newsfeeds file to be sent. This
was intended to partially counter so-called ``sendsys bombs'', where forged
sendsys control messages were used to mailbomb people.
Processing sendsys control messages is not recommended even with this work-around unless they are authenticated in some fashion. The risk of having news servers turned into anonymous mail bombing services is too high.
The action is performed as in doit, and additionally a log entry is
written to the specified log file file. If file is the word
"mail", the log entry is mailed to the news administrator instead. An
empty string is equivalent to /dev/null and says to log nothing.
If file starts with a slash, it is taken as the absolute filename to use for the log file. Otherwise, the filename is formed by prepending pathlog and a slash, and appending ".log". In other words, an action of "doit=newgroup" will log to pathlog/newgroup.log.
No action is taken and the message is ignored. For checkgroups messages,
it means that the newsgroups mentioned will be considered as not existent
in the checkgroups for its subsequent process.
will for instance remove every newsgroup whose name contains "binaries" in the comp.* hierarchy, even though such groups are mentioned in the checkgroups. (In that example, the removal is performed by the doit action because drop does nothing by itself.)
If the action starts with the string "verify-", as in:
then PGP verification of the control message will be done and the user ID of the key of the authenticated signer will be checked against the expected identity defined by the rest of the string ("news.announce.newgroups" in the above example). This verification is done via pgpverify; see pgpverify(8) for more details.
If no logging is specified (with =file as mentioned below), logging will be done the same as with doit as described above.
- PGP verification is done as for the verify-* action described above, and notification of successful newgroup and rmgroup control messages and the output of checkgroups messages will be mailed to the news administrator. (In the case of checkgroups messages, this means that the shell script that should be run will be mailed to the administrator. The subject of the mail will contain information on whether the script has already been run, depending on the value of /maxdocheckgroups/.)
- PGP verification is done as for the verify-* action described above, and a log entry is written to the specified file as described in doit=file above. (In the case of checkgroups messages, this means that the shell script output of the checkgroups message will be written to that file. The initial line of the log will contain information on whether the script has already been run, depending on the value of /maxdocheckgroups/.)
- A one-line log message is sent to standard error. innd normally directs this to pathlog/errlog.
- A log entry is written to the specified log file, which is interpreted as in doit=file described above.
- A mail message is sent to the news administrator without taking any other action.
One of the difference between a doit or verify action and a mail action for a checkgroups control message lies in what e-mail is sent; doit or verify will mail the news administrator a shell script (which may have already been run) to create, delete, or modify newsgroups to match the checkgroups message, whereas mail will just mail relevant lines of the checkgroups for manual processing by the news administrator.
Use of the verify action for processing newgroup, rmgroup and checkgroups messages is STRONGLY recommended. Abuse of control messages is rampant, and authentication via PGP signature is currently the only reliable way to be sure that a control message comes from who it claims to be from. Most major hierarchies are now issuing PGP-authenticated control messages.
In order to use verify actions, the PGP key ring of the news user must be populated with the PGP keys of the hierarchy maintainers whose control messages you want to honour. For more details on PGP-authenticated control messages and the URL for downloading the PGP keys of major hierarchies, see pgpverify(8).
EXAMPLESWith the following three lines in control.ctl:
newgroup:*:*:drop newgroup:group-admin [at] isc.org:comp.*:verify-news.announce.newgroups newgroup:kre [at] munnari.oz.au:aus.*:mail
a newgroup coming from "group-admin [at] isc.org" will be honoured if it is for a newsgroup in the comp.* hierarchy and if it has a valid signature corresponding to the PGP key with a user ID of "news.announce.newgroups". If any newgroup claiming to be from "kre [at] munnari.oz.au" for a newsgroup in the aus.* hierarchy is received, it too will be honoured. All other newgroup messages will be ignored.
Besides, if a control.ctl.local file exists and contains:
then a newgroup control article for comp.lang.awk will not be honoured even though it comes from "group-admin [at] isc.org" with a valid signature.
As for checkgroups, suppose your news server contains these groups for foo.*, all of them being unmoderated ("y" status in the active file):
foo.bar1 foo.bar2.first foo.bar2.second foo.bar2.third foo.bar3 foo.bar3.first foo.bar3.second foo.bar5
and you receive the following checkgroups by <foo [at] bar.com> for foo.*:
foo.bar1 A valid newsgroup. foo.bar3.first Only one newsgroup in foo.bar3.*. foo.bar4 A newsgroup you want. foo.bar5 A newsgroup you do not want. foo.bar5.first Another newsgroup you do not want.
with the following control.ctl entries:
/maxdocheckgroups/:*:foo.*:2 checkgroups:foo [at] bar.com:foo.*:verify-key-foo checkgroups:foo [at] bar.com:foo.bar2.*:doit checkgroups:foo [at] bar.com:foo.bar3.*:mail checkgroups:foo [at] bar.com:foo.bar4|foo.bar4.*:doit checkgroups:foo [at] bar.com:foo.bar5|foo.bar5.*:drop
Then, as control.ctl is processed from bottom, here is what happens:
- The newsgroups foo.bar5 and foo.bar5.first are marked as unwanted. But nothing is done yet: other control.ctl entries have to be processed with a real action and a set of newsgroups containing foo.bar5 and foo.bar5.first.
The newsgroup foo.bar4 is silently created on the news server, with
the description ``A newsgroup you want.'' added to the newsgroups
file. In the absence of encoding values (either in the checkgroups
message or in /encoding/ and /localencoding), the default is
to decode the sentence as CP1242 and reencode it as UTF-8.
If "doit=mail" was used, a mail would be sent to the news administrator to inform him that foo.bar4 was successfully created.
The newsgroup foo.bar3.second is no longer present. A mail is sent
to the news administrator with a shell script to execute. When it is
manually executed, foo.bar3.second will be removed.
Note that the descriptions are handled differently and have already been updated without any manual intervention (foo.bar3.first now has the description ``Only one newsgroup in foo.bar3.*.'' and foo.bar3.second no longer has a description).
The newsgroups foo.bar2.first, foo.bar2.second and foo.bar2.third
are no longer present. However, as the maximum number of changes
that could be made at one time by a checkgroups before bailing
and mailing the changes to the news administrator is 2, these
newsgroups are not removed. A mail is sent with a shell script
to manually execute in order to remove these groups from
the news server.
Note that their descriptions are removed from the newsgroups file, as well as any other possible descriptions for obsolete newsgroups in foo.bar2.*.
The remaining entry is executed if the PGP verification of the
checkgroups message is successful. Otherwise, nothing is done
(especially, foo.bar5 remains on the news server).
In case the PGP signature is verified, foo.bar3 and foo.bar5 are removed from the news server. This entry acts upon newsgroups marked as dropped in its scope and newsgroups not already dealt with by previous control.ctl entries (like foo.bar3 because only foo.bar3.* was previously checked).
Note that if you had wanted to keep foo.bar3 or foo.bar5, you could have added them to the localgroups file in pathetc.