cloc (1) - Linux Manuals

cloc: Count, and compute differences of, lines of source code and comments.

NAME

cloc - Count, and compute differences of, lines of source code and comments.

SYNOPSIS

  cloc [options] <FILE|DIR> ...

DESCRIPTION

Count, or compute differences of, physical lines of source code in the given files (may be archives such as compressed tarballs or zip files) and/or recursively below the given directories. It is written entirely in Perl, using only modules from the standard distribution.

OPTIONS

Input Options

To count standard input, use the special filename - and either --stdin-name=FILE to tell cloc the name of the file being piped in, or --force-lang=LANG to apply the LANG counter to all input.
--extract-with=CMD
This option is only needed if cloc is unable to figure out how to extract the contents of the input file(s) by itself. Use CMD to extract binary archive files (e.g.: .tar.gz, .zip, .Z). Use the literal '>FILE<' as a stand-in for the actual file(s) to be extracted. For example, to count lines of code in the input files gcc-4.2.tar.gz perl-5.8.8.tar.gz on Unix use:

    --extract-with='gzip -dc >FILE< | tar xf -

or, if you have GNU tar:

    --extract-with='tar zxf >FILE<'

and on Windows, use, for example:

    --extract-with="\"c:\Program Files\WinZip\WinZip32.exe\" -e -o >FILE<
--list-file=FILE
Take the list of file and/or directory names to process from FILE, which has one file/directory name per line. Only exact matches are counted; relative path names will be resolved starting from the directory where cloc is invoked. See also --exclude-list-file
--vcs=VCS
Invoke a system call to VCS to obtain a list of files to work on. If VCS is 'git', then will invoke 'git ls-files'. If VCS is 'svn' then will invoke 'svn list -R'. The primary benefit is that cloc will then skip files explicitly excluded by the versioning tool in question, ie, those in .gitignore or have the svn:ignore property. Alternatively VCS may be any system command that generates a list of files. Note: cloc must be in a directory which can read the files as they are returned by VCS. cloc will not download files from remote repositories. 'svn list -R' may refer to a remote repository to obtain file names (and therefore may require authentication to the remote repository), but the files themselves must be local.
--unicode
Check binary files to see if they contain Unicode expanded ASCII text. This causes performance to drop noticeably.

Processing Options

--autoconf
Count .in files (as processed by GNU autoconf) of recognized languages.
--by-file
Report results for every source file encountered.
--by-file-by-lang
Report results for every source file encountered in addition to reporting by language.
--count-and-diff SET1 SET2
First perform direct code counts of source file(s) of SET1 and SET2 separately, then perform a diff of these. Inputs may be pairs of files, directories, or archives. See also --diff, --diff-alignment, --diff-timeout, --ignore-case, --ignore-whitespace.
--diff SET1 SET2
Compute differences in code and comments between source file(s) of SET1 and SET2. The inputs may be pairs of files, directories, or archives. Use --diff-alignment to generate a list showing which file pairs where compared. See also --count-and-diff, --diff-alignment, --diff-timeout, --ignore-case, --ignore-whitespace.
--diff-timeout N
Ignore files which take more than N seconds to process. Default is 10 seconds. (Large files with many repeated lines can cause Algorithm::Diff::sdiff() to take hours.)
--follow-links
[Unix only] Follow symbolic links to directories (sym links to files are always followed).
--force-lang=LANG[,EXT]
Process all files that have a EXT extension with the counter for language LANG. For example, to count all .f files with the Fortran 90 counter (which expects files to end with .f90) instead of the default Fortran 77 counter, use:

        --force-lang="Fortran 90",f

If EXT is omitted, every file will be counted with the LANG counter. This option can be specified multiple times (but that is only useful when EXT is given each time). See also --script-lang, --lang-no-ext.

--force-lang-def=FILE
Load language processing filters from FILE, then use these filters instead of the built-in filters. Note: languages which map to the same file extension (for example: MATLAB/Objective C/MUMPS; Pascal/PHP; Lisp/OpenCL; Lisp/Julia; Perl/Prolog) will be ignored as these require additional processing that is not expressed in language definition files. Use --read-lang-def to define new language filters without replacing built-in filters (see also --write-lang-def).
--ignore-whitespace
Ignore horizontal white space when comparing files with --diff. See also --ignore-case.
--ignore-case
Ignore changes in case; consider upper- and lowercase letters equivalent when comparing files with --diff. See also --ignore-whitespace.
--lang-no-ext=LANG
Count files without extensions using the LANG counter. This option overrides internal logic for files without extensions (where such files are checked against known scripting languages by examining the first line for "#!"). See also --force-lang, --script-lang.
--max-file-size=MB
Skip files larger than "MB" megabytes when traversing directories. By default, "MB"=100. cloc's memory requirement is roughly twenty times larger than the largest file so running with files larger than 100 MB on a computer with less than 2 GB of memory will cause problems. Note: this check does not apply to files explicitly passed as command line arguments.
--read-binary-files
Process binary files in addition to text files. This is usually a bad idea and should only be attempted with text files that have embedded binary data.
--read-lang-def=FILE
Load new language processing filters from FILE and merge them with those already known to cloc. If FILE defines a language cloc already knows about, cloc's definition will take precedence. Use --force-lang-def to over-ride cloc's definitions. (see also --write-lang-def).
--script-lang=LANG,S
Process all files that invoke "S" as a "#!" scripting language with the counter for language LANG. For example, files that begin with "#!/usr/local/bin/perl5.8.8" will be counted with the Perl counter by using

        --script-lang=Perl,perl5.8.8

The language name is case insensitive but the name of the script language executable, "S", must have the right case. This option can be specified multiple times. See also --force-lang.

--sdir=DIR
Use DIR as the scratch directory instead of letting File::Temp chose the location. Files written to this location are not removed at the end of the run (as they are with File::Temp).
--skip-uniqueness
Skip the file uniqueness check. This will give a performance boost at the expense of counting files with identical contents multiple times (if such duplicates exist).
--stdin-name=FILE
Count lines streamed via STDIN as if they came from a file named FILE.
--strip-comments=EXT
For each file processed, write to the current directory a version of the file which has blank lines and comments removed. The name of each stripped file is the original file name with ".EXT" appended to it. It is written to the current directory unless --original-dir is on.
--original-dir
Write the stripped files the same directory as the original files. Only effective in combination with --strip-comments.
--sum-reports
Input arguments are report files previously created with the --report-file option. Makes a cumulative set of results containing the sum of data from the individual report files.
--unix
Over-ride the operating system detection logic and run in UNIX mode. See also --windows, --show-os.
--use-sloccount
If SLOCCount is installed, use its compiled executables c_count, java_count, pascal_count, php_count, and xml_count instead of cloc's counters. SLOCCount's compiled counters are substantially faster than cloc's and may give a performance improvement when counting projects with large files. However, these cloc-specific features will not be available: --diff, --count-and-diff, --strip-comments, --unicode.
--windows
Over-ride the operating system detection logic and run in Microsoft Windows mode. See also --unix, --show-os.

Filter Options

--exclude-dir=DIR1[,DIR2 ...]
Exclude the given comma separated directories from being scanned. For example:

        --exclude-dir=.cache,test

will skip all files that match "/.cache/" or "/test/" as part of their path. Directories named ".bzr", ".cvs", ".hg", ".git", and ".svn" are always excluded.

--exclude-ext=EXT1[,EXT2 ...]
Do not count files having the given file name extensions.
--exclude-lang=L1[,L2 ...]
Exclude the given comma separated languages from being counted.
--exclude-list-file=FILE Ignore files and/or directories whose names appear in FILE. FILE should have one file name per line. Only exact matches are ignored; relative path names will be resolved starting from the directory where cloc is invoked. See also --list-file.
--fullpath Modifies the behavior of --match-f or --not-match-f to include the file's path in the regex, not just the file's basename. (This does not expand each file to include its absolute path, instead it uses as much of the path as is passed in to cloc.)
--include-lang=L1[,L2 ...]
Count only the given comma separated languages L1, L2, L3, et cetera.
--match-d=REGEX
Only count files in directories matching the Perl regex. For example

     --match-d='/(src|include)/'

only counts files in directory paths containing "/src/" or "/include/".

--not-match-d=REGEX
Count all files except in directories matching the Perl regex.
--match-f=REGEX
Only count files whose basenames match the Perl regex. For example this only counts files at start with Widget or widget:

     --match-f='^[Ww]idget'
--not-match-f=REGEX
Count all files except those whose basenames match the Perl regex.
--skip-archive=REGEX
Ignore files that end with the given Perl regular expression. For example, if given
  --skip-archive='(zip|tar(\.(gz|Z|bz2|xz|7z))?)' the code will skip files that end with .zip, .tar, .tar.gz, .tar.Z, .tar.bz2, .tar.xz, and .tar.7z.
--skip-win-hidden
On Windows, ignore hidden files.

Debug Options

--categorized=FILE
Save names of categorized files to FILE.
--counted=FILE
Save names of processed source files to FILE.
--diff-alignment=FILE
Write to FILE a list of files and file pairs showing which files were added, removed, and/or compared during a run with --diff. This switch forces the --diff mode on.
--explain=LANG
Print the filters used to remove comments for language LANG and exit. In some cases the filters refer to Perl subroutines rather than regular expressions. An examination of the source code may be needed for further explanation.
--help
Print this usage information and exit.
--found=FILE
Save names of every file found to FILE.
--ignored=FILE
Save names of ignored files and the reason they were ignored to FILE.
--print-filter-stages
Print to STDOUT processed source code before and after each filter is applied.
--show-ext[=EXT]
Print information about all known (or just the given) file extensions and exit.
--show-lang[=LANG]
Print information about all known (or just the given) languages and exit.
--show-os
Print the value of the operating system mode and exit. See also --unix, --windows.
-v[=N]
Turn on verbose with optional numeric value.
--verbose[=N]
Long form of -v.
--version
Print the version of this program and exit.
--write-lang-def=FILE
Writes to FILE the language processing filters then exits. Useful as a first step to creating custom language definitions. See also --force-lang-def, --read-lang-def.

Output Options

--3
Print third-generation language output. (This option can cause report summation to fail if some reports were produced with this option while others were produced without it.)
--by-percent X
Instead of comment and blank line counts, show these values as percentages based on the value of X in the denominator:

    X = 'c'   -> # lines of code
    X = 'cm'  -> # lines of code + comments
    X = 'cb'  -> # lines of code + blanks
    X = 'cmb' -> # lines of code + comments + blanks

For example, if using method 'c' and your code has twice as many lines of comments as lines of code, the value in the comment column will be 200%. The code column remains a line count.

--csv
Write the results as comma separated values.
--csv-delimiter=C
Use the character C as the delimiter for comma separated files instead of ,. This switch forces --csv to be on.
--json
Write the results in JavaScript Object Notation (JSON).
--md
Write the results as Markdown-formatted text.
--out=FILE
Synonym for --report-file=FILE.
--progress-rate=N
Show progress update after every N files are processed (default N=100). Set N to 0 to suppress progress output; useful when redirecting output to STDOUT.
--quiet
Suppress all information messages except for the final report.
--report-file=FILE
Write the results to FILE instead of standard output.
--sql=FILE
Write results as SQL CREATE and INSERT statements which can be read by a database program such as SQLite. If FILE is -, output is sent to STDOUT.
--sql-append
Append SQL insert statements to the file specified by --sql and do not generate table creation option.
--sql-project=NAME
Use <name> as the project identifier for the current run. Only valid with the --sql option.
--sql-style=STYLE
Write SQL statements in the given style instead of the default SQLite format. Currently, the only style option is Oracle.
--sum-one
For plain text reports, show the SUM: output line even if only one input file is processed.
--xml
Write the results in XML.
--xsl[=FILE]
Reference FILE as an XSL stylesheet within the XML output. If FILE is not given, writes a default stylesheet, cloc.xsl. This switch forces --xml to be on.
--yaml
Write the results in YAML.

EXAMPLES

Count the lines of code in the Perl 5.10.0 compressed tar file on a UNIX-like operating system:

  cloc perl-5.10.0.tar.gz

Count the changes in files, code, and comments between Python releases 2.6.6 and 2.7:

  cloc --diff Python-2.6.6.tar.bz  Python-2.7.tar.bz2

To see how cloc aligns files for comparison between two code bases, use the --diff-alignment=FILE option. Here the alignment information is written to "align.txt":

  cloc --diff-aligment=align.txt gcc-4.4.0.tar.bz2  gcc-4.5.0.tar.bz2

Print the recognized languages

  cloc --show-lang

Remove comments from "foo.c" and save the result in "foo.c.nc"

  cloc --strip-comments=nc foo.c

Additional examples can be found at <http://cloc.sourceforge.net>.

ENVIRONMENT

None.

FILES

None.

AUTHORS

The cloc program was written by Al Danial <al.danial [at] gmail.com> and is Copyright (C) 2006-2016 <al.danial [at] gmail.com>.

The manual page was originally written by Jari Aalto <jari.aalto [at] cante.net>.

Both the code and documentation is released under the GNU GPL version 2 or (at your option) any later version. For more information about license, visit <http://www.gnu.org/copyleft/gpl.html>.

SEE ALSO

sloccount(1)