fchownat (2) - Linux Man Pages
fchownat: change ownership of a file
chown, fchown, lchown, fchownat - change ownership of a file
#include <unistd.h> int chown(const char *pathname, uid_t owner, gid_t group); int fchown(int fd, uid_t owner, gid_t group); int lchown(const char *pathname, uid_t owner, gid_t group); #include <fcntl.h> /* Definition of AT_* constants */ #include <unistd.h> int fchownat(int dirfd, const char *pathname, uid_t owner, gid_t group, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
/* Since glibc 2.12: */ _POSIX_C_SOURCE >= 200809L
|| _XOPEN_SOURCE >= 500
|| /* Glibc versions <= 2.19: */ _BSD_SOURCE
- Since glibc 2.10:
- _POSIX_C_SOURCE >= 200809L
- Before glibc 2.10:
DESCRIPTIONThese system calls change the owner and group of a file. The chown(), fchown(), and lchown() system calls differ only in how the file is specified:
- chown() changes the ownership of the file specified by pathname, which is dereferenced if it is a symbolic link.
- fchown() changes the ownership of the file referred to by the open file descriptor fd.
- lchown() is like chown(), but does not dereference symbolic links.
Only a privileged process (Linux: one with the CAP_CHOWN capability) may change the owner of a file. The owner of a file may change the group of the file to any group of which that owner is a member. A privileged process (Linux: with CAP_CHOWN) may change the group arbitrarily.
If the owner or group is specified as -1, then that ID is not changed.
When the owner or group of an executable file is changed by an unprivileged user, the S_ISUID and S_ISGID mode bits are cleared. POSIX does not specify whether this also should happen when root does the chown(); the Linux behavior depends on the kernel version, and since Linux 2.2.13, root is treated like other users. In case of a non-group-executable file (i.e., one for which the S_IXGRP bit is not set) the S_ISGID bit indicates mandatory locking, and is not cleared by a chown().
fchownat()The fchownat() system call operates in exactly the same way as chown(), except for the differences described here.
If the pathname given in pathname is relative, then it is interpreted relative to the directory referred to by the file descriptor dirfd (rather than relative to the current working directory of the calling process, as is done by chown() for a relative pathname).
If pathname is relative and dirfd is the special value AT_FDCWD, then pathname is interpreted relative to the current working directory of the calling process (like chown()).
If pathname is absolute, then dirfd is ignored.
The flags argument is a bit mask created by ORing together 0 or more of the following values;
- AT_EMPTY_PATH (since Linux 2.6.39)
- If pathname is an empty string, operate on the file referred to by dirfd (which may have been obtained using the open(2) O_PATH flag). In this case, dirfd can refer to any type of file, not just a directory. If dirfd is AT_FDCWD, the call operates on the current working directory. This flag is Linux-specific; define _GNU_SOURCE to obtain its definition.
- If pathname is a symbolic link, do not dereference it: instead operate on the link itself, like lchown(). (By default, fchownat() dereferences symbolic links, like chown().)
See openat(2) for an explanation of the need for fchownat().
RETURN VALUEOn success, zero is returned. On error, -1 is returned, and errno is set appropriately.
ERRORSDepending on the filesystem, errors other than those listed below can be returned.
The more general errors for chown() are listed below.
- Search permission is denied on a component of the path prefix. (See also path_resolution(7).)
- pathname points outside your accessible address space.
- Too many symbolic links were encountered in resolving pathname.
- pathname is too long.
- The file does not exist.
- Insufficient kernel memory was available.
- A component of the path prefix is not a directory.
- The calling process did not have the required permissions (see above) to change owner and/or group.
- The file is marked immutable or append-only. (See ioctl_iflags(2).)
- The named file resides on a read-only filesystem.
The general errors for fchown() are listed below:
- fd is not a valid open file descriptor.
- A low-level I/O error occurred while modifying the inode.
- See above.
- See above.
- See above.
The same errors that occur for chown() can also occur for fchownat(). The following additional errors can occur for fchownat():
- dirfd is not a valid file descriptor.
- Invalid flag specified in flags.
- pathname is relative and dirfd is a file descriptor referring to a file other than a directory.
VERSIONSfchownat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4.
CONFORMING TOchown(), fchown(), lchown(): 4.4BSD, SVr4, POSIX.1-2001, POSIX.1-2008.
The 4.4BSD version can be used only by the superuser (that is, ordinary users cannot give away files).
Ownership of new filesWhen a new file is created (by, for example, open(2) or mkdir(2)), its owner is made the same as the filesystem user ID of the creating process. The group of the file depends on a range of factors, including the type of filesystem, the options used to mount the filesystem, and whether or not the set-group-ID mode bit is enabled on the parent directory. If the filesystem supports the -o grpid (or, synonymously -o bsdgroups) and -o nogrpid (or, synonymously -o sysvgroups) mount(8) options, then the rules are as follows:
- If the filesystem is mounted with -o grpid, then the group of a new file is made the same as that of the parent directory.
- If the filesystem is mounted with -o nogrpid and the set-group-ID bit is disabled on the parent directory, then the group of a new file is made the same as the process's filesystem GID.
- If the filesystem is mounted with -o nogrpid and the set-group-ID bit is enabled on the parent directory, then the group of a new file is made the same as that of the parent directory.
Glibc notesOn older kernels where fchownat() is unavailable, the glibc wrapper function falls back to the use of chown() and lchown(). When pathname is a relative pathname, glibc constructs a pathname based on the symbolic link in /proc/self/fd that corresponds to the dirfd argument.
NFSThe chown() semantics are deliberately violated on NFS filesystems which have UID mapping enabled. Additionally, the semantics of all system calls which access the file contents are violated, because chown() may cause immediate access revocation on already open files. Client side caching may lead to a delay between the time where ownership have been changed to allow access for a user and the time where the file can actually be accessed by the user on other clients.
Historical detailsThe original Linux chown(), fchown(), and lchown() system calls supported only 16-bit user and group IDs. Subsequently, Linux 2.4 added chown32(), fchown32(), and lchown32(), supporting 32-bit IDs. The glibc chown(), fchown(), and lchown() wrapper functions transparently deal with the variations across kernel versions.
In versions of Linux prior to 2.1.81 (and distinct from 2.1.46), chown() did not follow symbolic links. Since Linux 2.1.81, chown() does follow symbolic links, and there is a new system call lchown() that does not follow symbolic links. Since Linux 2.1.86, this new call (that has the same semantics as the old chown()) has got the same syscall number, and chown() got the newly introduced number.
The following program changes the ownership of the file named in its second command-line argument to the value specified in its first command-line argument. The new owner can be specified either as a numeric user ID, or as a username (which is converted to a user ID by using getpwnam(3) to perform a lookup in the system password file).
Program source#include <pwd.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h>
main(int argc, char *argv)
This page is part of release 5.05 of the Linux
A description of the project,
information about reporting bugs,
and the latest version of this page,
can be found at