DGEGV (3)  Linux Manuals
NAME
dgegv.f 
SYNOPSIS
Functions/Subroutines
subroutine dgegv (JOBVL, JOBVR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VL, LDVL, VR, LDVR, WORK, LWORK, INFO)
DGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Function/Subroutine Documentation
subroutine dgegv (characterJOBVL, characterJOBVR, integerN, double precision, dimension( lda, * )A, integerLDA, double precision, dimension( ldb, * )B, integerLDB, double precision, dimension( * )ALPHAR, double precision, dimension( * )ALPHAI, double precision, dimension( * )BETA, double precision, dimension( ldvl, * )VL, integerLDVL, double precision, dimension( ldvr, * )VR, integerLDVR, double precision, dimension( * )WORK, integerLWORK, integerINFO)
DGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Purpose:

This routine is deprecated and has been replaced by routine DGGEV. DGEGV computes the eigenvalues and, optionally, the left and/or right eigenvectors of a real matrix pair (A,B). Given two square matrices A and B, the generalized nonsymmetric eigenvalue problem (GNEP) is to find the eigenvalues lambda and corresponding (nonzero) eigenvectors x such that A*x = lambda*B*x. An alternate form is to find the eigenvalues mu and corresponding eigenvectors y such that mu*A*y = B*y. These two forms are equivalent with mu = 1/lambda and x = y if neither lambda nor mu is zero. In order to deal with the case that lambda or mu is zero or small, two values alpha and beta are returned for each eigenvalue, such that lambda = alpha/beta and mu = beta/alpha. The vectors x and y in the above equations are right eigenvectors of the matrix pair (A,B). Vectors u and v satisfying u**H*A = lambda*u**H*B or mu*v**H*A = v**H*B are left eigenvectors of (A,B). Note: this routine performs "full balancing" on A and B
Parameters:

JOBVL
JOBVL is CHARACTER*1 = 'N': do not compute the left generalized eigenvectors; = 'V': compute the left generalized eigenvectors (returned in VL).
JOBVRJOBVR is CHARACTER*1 = 'N': do not compute the right generalized eigenvectors; = 'V': compute the right generalized eigenvectors (returned in VR).
NN is INTEGER The order of the matrices A, B, VL, and VR. N >= 0.
AA is DOUBLE PRECISION array, dimension (LDA, N) On entry, the matrix A. If JOBVL = 'V' or JOBVR = 'V', then on exit A contains the real Schur form of A from the generalized Schur factorization of the pair (A,B) after balancing. If no eigenvectors were computed, then only the diagonal blocks from the Schur form will be correct. See DGGHRD and DHGEQZ for details.
LDALDA is INTEGER The leading dimension of A. LDA >= max(1,N).
BB is DOUBLE PRECISION array, dimension (LDB, N) On entry, the matrix B. If JOBVL = 'V' or JOBVR = 'V', then on exit B contains the upper triangular matrix obtained from B in the generalized Schur factorization of the pair (A,B) after balancing. If no eigenvectors were computed, then only those elements of B corresponding to the diagonal blocks from the Schur form of A will be correct. See DGGHRD and DHGEQZ for details.
LDBLDB is INTEGER The leading dimension of B. LDB >= max(1,N).
ALPHARALPHAR is DOUBLE PRECISION array, dimension (N) The real parts of each scalar alpha defining an eigenvalue of GNEP.
ALPHAIALPHAI is DOUBLE PRECISION array, dimension (N) The imaginary parts of each scalar alpha defining an eigenvalue of GNEP. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) = ALPHAI(j).
BETABETA is DOUBLE PRECISION array, dimension (N) The scalars beta that define the eigenvalues of GNEP. Together, the quantities alpha = (ALPHAR(j),ALPHAI(j)) and beta = BETA(j) represent the jth eigenvalue of the matrix pair (A,B), in one of the forms lambda = alpha/beta or mu = beta/alpha. Since either lambda or mu may overflow, they should not, in general, be computed.
VLVL is DOUBLE PRECISION array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored in the columns of VL, in the same order as their eigenvalues. If the jth eigenvalue is real, then u(j) = VL(:,j). If the jth and (j+1)st eigenvalues form a complex conjugate pair, then u(j) = VL(:,j) + i*VL(:,j+1) and u(j+1) = VL(:,j)  i*VL(:,j+1). Each eigenvector is scaled so that its largest component has abs(real part) + abs(imag. part) = 1, except for eigenvectors corresponding to an eigenvalue with alpha = beta = 0, which are set to zero. Not referenced if JOBVL = 'N'.
LDVLLDVL is INTEGER The leading dimension of the matrix VL. LDVL >= 1, and if JOBVL = 'V', LDVL >= N.
VRVR is DOUBLE PRECISION array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors x(j) are stored in the columns of VR, in the same order as their eigenvalues. If the jth eigenvalue is real, then x(j) = VR(:,j). If the jth and (j+1)st eigenvalues form a complex conjugate pair, then x(j) = VR(:,j) + i*VR(:,j+1) and x(j+1) = VR(:,j)  i*VR(:,j+1). Each eigenvector is scaled so that its largest component has abs(real part) + abs(imag. part) = 1, except for eigenvalues corresponding to an eigenvalue with alpha = beta = 0, which are set to zero. Not referenced if JOBVR = 'N'.
LDVRLDVR is INTEGER The leading dimension of the matrix VR. LDVR >= 1, and if JOBVR = 'V', LDVR >= N.
WORKWORK is DOUBLE PRECISION array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORKLWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,8*N). For good performance, LWORK must generally be larger. To compute the optimal value of LWORK, call ILAENV to get blocksizes (for DGEQRF, DORMQR, and DORGQR.) Then compute: NB  MAX of the blocksizes for DGEQRF, DORMQR, and DORGQR; The optimal LWORK is: 2*N + MAX( 6*N, N*(NB+1) ). If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA.
INFOINFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. No eigenvectors have been calculated, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: errors that usually indicate LAPACK problems: =N+1: error return from DGGBAL =N+2: error return from DGEQRF =N+3: error return from DORMQR =N+4: error return from DORGQR =N+5: error return from DGGHRD =N+6: error return from DHGEQZ (other than failed iteration) =N+7: error return from DTGEVC =N+8: error return from DGGBAK (computing VL) =N+9: error return from DGGBAK (computing VR) =N+10: error return from DLASCL (various calls)
Author:

Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
 November 2011
Further Details:

Balancing  This driver calls DGGBAL to both permute and scale rows and columns of A and B. The permutations PL and PR are chosen so that PL*A*PR and PL*B*R will be upper triangular except for the diagonal blocks A(i:j,i:j) and B(i:j,i:j), with i and j as close together as possible. The diagonal scaling matrices DL and DR are chosen so that the pair DL*PL*A*PR*DR, DL*PL*B*PR*DR have elements close to one (except for the elements that start out zero.) After the eigenvalues and eigenvectors of the balanced matrices have been computed, DGGBAK transforms the eigenvectors back to what they would have been (in perfect arithmetic) if they had not been balanced. Contents of A and B on Exit        If any eigenvectors are computed (either JOBVL='V' or JOBVR='V' or both), then on exit the arrays A and B will contain the real Schur form[*] of the "balanced" versions of A and B. If no eigenvectors are computed, then only the diagonal blocks will be correct. [*] See DHGEQZ, DGEGS, or read the book "Matrix Computations", by Golub & van Loan, pub. by Johns Hopkins U. Press.
Definition at line 306 of file dgegv.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.