SLARRE (3) - Linux Manuals

NAME

slarre.f -

SYNOPSIS


Functions/Subroutines


subroutine slarre (RANGE, N, VL, VU, IL, IU, D, E, E2, RTOL1, RTOL2, SPLTOL, NSPLIT, ISPLIT, M, W, WERR, WGAP, IBLOCK, INDEXW, GERS, PIVMIN, WORK, IWORK, INFO)
SLARRE given the tridiagonal matrix T, sets small off-diagonal elements to zero and for each unreduced block Ti, finds base representations and eigenvalues.

Function/Subroutine Documentation

subroutine slarre (characterRANGE, integerN, realVL, realVU, integerIL, integerIU, real, dimension( * )D, real, dimension( * )E, real, dimension( * )E2, realRTOL1, realRTOL2, realSPLTOL, integerNSPLIT, integer, dimension( * )ISPLIT, integerM, real, dimension( * )W, real, dimension( * )WERR, real, dimension( * )WGAP, integer, dimension( * )IBLOCK, integer, dimension( * )INDEXW, real, dimension( * )GERS, realPIVMIN, real, dimension( * )WORK, integer, dimension( * )IWORK, integerINFO)

SLARRE given the tridiagonal matrix T, sets small off-diagonal elements to zero and for each unreduced block Ti, finds base representations and eigenvalues.

Purpose:

 To find the desired eigenvalues of a given real symmetric
 tridiagonal matrix T, SLARRE sets any "small" off-diagonal
 elements to zero, and for each unreduced block T_i, it finds
 (a) a suitable shift at one end of the block's spectrum,
 (b) the base representation, T_i - sigma_i I = L_i D_i L_i^T, and
 (c) eigenvalues of each L_i D_i L_i^T.
 The representations and eigenvalues found are then used by
 SSTEMR to compute the eigenvectors of T.
 The accuracy varies depending on whether bisection is used to
 find a few eigenvalues or the dqds algorithm (subroutine SLASQ2) to
 conpute all and then discard any unwanted one.
 As an added benefit, SLARRE also outputs the n
 Gerschgorin intervals for the matrices L_i D_i L_i^T.


 

Parameters:

RANGE

          RANGE is CHARACTER*1
          = 'A': ("All")   all eigenvalues will be found.
          = 'V': ("Value") all eigenvalues in the half-open interval
                           (VL, VU] will be found.
          = 'I': ("Index") the IL-th through IU-th eigenvalues (of the
                           entire matrix) will be found.


N

          N is INTEGER
          The order of the matrix. N > 0.


VL

          VL is REAL


VU

          VU is REAL
          If RANGE='V', the lower and upper bounds for the eigenvalues.
          Eigenvalues less than or equal to VL, or greater than VU,
          will not be returned.  VL < VU.
          If RANGE='I' or ='A', SLARRE computes bounds on the desired
          part of the spectrum.


IL

          IL is INTEGER


IU

          IU is INTEGER
          If RANGE='I', the indices (in ascending order) of the
          smallest and largest eigenvalues to be returned.
          1 <= IL <= IU <= N.


D

          D is REAL array, dimension (N)
          On entry, the N diagonal elements of the tridiagonal
          matrix T.
          On exit, the N diagonal elements of the diagonal
          matrices D_i.


E

          E is REAL array, dimension (N)
          On entry, the first (N-1) entries contain the subdiagonal
          elements of the tridiagonal matrix T; E(N) need not be set.
          On exit, E contains the subdiagonal elements of the unit
          bidiagonal matrices L_i. The entries E( ISPLIT( I ) ),
          1 <= I <= NSPLIT, contain the base points sigma_i on output.


E2

          E2 is REAL array, dimension (N)
          On entry, the first (N-1) entries contain the SQUARES of the
          subdiagonal elements of the tridiagonal matrix T;
          E2(N) need not be set.
          On exit, the entries E2( ISPLIT( I ) ),
          1 <= I <= NSPLIT, have been set to zero


RTOL1

          RTOL1 is REAL


RTOL2

          RTOL2 is REAL
           Parameters for bisection.
           An interval [LEFT,RIGHT] has converged if
           RIGHT-LEFT.LT.MAX( RTOL1*GAP, RTOL2*MAX(|LEFT|,|RIGHT|) )


SPLTOL

          SPLTOL is REAL
          The threshold for splitting.


NSPLIT

          NSPLIT is INTEGER
          The number of blocks T splits into. 1 <= NSPLIT <= N.


ISPLIT

          ISPLIT is INTEGER array, dimension (N)
          The splitting points, at which T breaks up into blocks.
          The first block consists of rows/columns 1 to ISPLIT(1),
          the second of rows/columns ISPLIT(1)+1 through ISPLIT(2),
          etc., and the NSPLIT-th consists of rows/columns
          ISPLIT(NSPLIT-1)+1 through ISPLIT(NSPLIT)=N.


M

          M is INTEGER
          The total number of eigenvalues (of all L_i D_i L_i^T)
          found.


W

          W is REAL array, dimension (N)
          The first M elements contain the eigenvalues. The
          eigenvalues of each of the blocks, L_i D_i L_i^T, are
          sorted in ascending order ( SLARRE may use the
          remaining N-M elements as workspace).


WERR

          WERR is REAL array, dimension (N)
          The error bound on the corresponding eigenvalue in W.


WGAP

          WGAP is REAL array, dimension (N)
          The separation from the right neighbor eigenvalue in W.
          The gap is only with respect to the eigenvalues of the same block
          as each block has its own representation tree.
          Exception: at the right end of a block we store the left gap


IBLOCK

          IBLOCK is INTEGER array, dimension (N)
          The indices of the blocks (submatrices) associated with the
          corresponding eigenvalues in W; IBLOCK(i)=1 if eigenvalue
          W(i) belongs to the first block from the top, =2 if W(i)
          belongs to the second block, etc.


INDEXW

          INDEXW is INTEGER array, dimension (N)
          The indices of the eigenvalues within each block (submatrix);
          for example, INDEXW(i)= 10 and IBLOCK(i)=2 imply that the
          i-th eigenvalue W(i) is the 10-th eigenvalue in block 2


GERS

          GERS is REAL array, dimension (2*N)
          The N Gerschgorin intervals (the i-th Gerschgorin interval
          is (GERS(2*i-1), GERS(2*i)).


PIVMIN

          PIVMIN is REAL
          The minimum pivot in the Sturm sequence for T.


WORK

          WORK is REAL array, dimension (6*N)
          Workspace.


IWORK

          IWORK is INTEGER array, dimension (5*N)
          Workspace.


INFO

          INFO is INTEGER
          = 0:  successful exit
          > 0:  A problem occured in SLARRE.
          < 0:  One of the called subroutines signaled an internal problem.
                Needs inspection of the corresponding parameter IINFO
                for further information.

          =-1:  Problem in SLARRD.
          = 2:  No base representation could be found in MAXTRY iterations.
                Increasing MAXTRY and recompilation might be a remedy.
          =-3:  Problem in SLARRB when computing the refined root
                representation for SLASQ2.
          =-4:  Problem in SLARRB when preforming bisection on the
                desired part of the spectrum.
          =-5:  Problem in SLASQ2.
          =-6:  Problem in SLASQ2.


 

Author:

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Date:

September 2012

Further Details:

  The base representations are required to suffer very little
  element growth and consequently define all their eigenvalues to
  high relative accuracy.


 

Contributors:

Beresford Parlett, University of California, Berkeley, USA

 Jim Demmel, University of California, Berkeley, USA 

 Inderjit Dhillon, University of Texas, Austin, USA 

 Osni Marques, LBNL/NERSC, USA 

 Christof Voemel, University of California, Berkeley, USA 

 

Definition at line 295 of file slarre.f.

Author

Generated automatically by Doxygen for LAPACK from the source code.