zheevr (3)  Linux Man Pages
NAME
zheevr.f 
SYNOPSIS
Functions/Subroutines
subroutine zheevr (JOBZ, RANGE, UPLO, N, A, LDA, VL, VU, IL, IU, ABSTOL, M, W, Z, LDZ, ISUPPZ, WORK, LWORK, RWORK, LRWORK, IWORK, LIWORK, INFO)
ZHEEVR computes the eigenvalues and, optionally, the left and/or right eigenvectors for HE matrices
Function/Subroutine Documentation
subroutine zheevr (characterJOBZ, characterRANGE, characterUPLO, integerN, complex*16, dimension( lda, * )A, integerLDA, double precisionVL, double precisionVU, integerIL, integerIU, double precisionABSTOL, integerM, double precision, dimension( * )W, complex*16, dimension( ldz, * )Z, integerLDZ, integer, dimension( * )ISUPPZ, complex*16, dimension( * )WORK, integerLWORK, double precision, dimension( * )RWORK, integerLRWORK, integer, dimension( * )IWORK, integerLIWORK, integerINFO)
ZHEEVR computes the eigenvalues and, optionally, the left and/or right eigenvectors for HE matrices
Purpose:

ZHEEVR computes selected eigenvalues and, optionally, eigenvectors of a complex Hermitian matrix A. Eigenvalues and eigenvectors can be selected by specifying either a range of values or a range of indices for the desired eigenvalues. ZHEEVR first reduces the matrix A to tridiagonal form T with a call to ZHETRD. Then, whenever possible, ZHEEVR calls ZSTEMR to compute eigenspectrum using Relatively Robust Representations. ZSTEMR computes eigenvalues by the dqds algorithm, while orthogonal eigenvectors are computed from various "good" L D L^T representations (also known as Relatively Robust Representations). GramSchmidt orthogonalization is avoided as far as possible. More specifically, the various steps of the algorithm are as follows. For each unreduced block (submatrix) of T, (a) Compute T  sigma I = L D L^T, so that L and D define all the wanted eigenvalues to high relative accuracy. This means that small relative changes in the entries of D and L cause only small relative changes in the eigenvalues and eigenvectors. The standard (unfactored) representation of the tridiagonal matrix T does not have this property in general. (b) Compute the eigenvalues to suitable accuracy. If the eigenvectors are desired, the algorithm attains full accuracy of the computed eigenvalues only right before the corresponding vectors have to be computed, see steps c) and d). (c) For each cluster of close eigenvalues, select a new shift close to the cluster, find a new factorization, and refine the shifted eigenvalues to suitable accuracy. (d) For each eigenvalue with a large enough relative separation compute the corresponding eigenvector by forming a rank revealing twisted factorization. Go back to (c) for any clusters that remain. The desired accuracy of the output can be specified by the input parameter ABSTOL. For more details, see DSTEMR's documentation and:  Inderjit S. Dhillon and Beresford N. Parlett: "Multiple representations to compute orthogonal eigenvectors of symmetric tridiagonal matrices," Linear Algebra and its Applications, 387(1), pp. 128, August 2004.  Inderjit Dhillon and Beresford Parlett: "Orthogonal Eigenvectors and Relative Gaps," SIAM Journal on Matrix Analysis and Applications, Vol. 25, 2004. Also LAPACK Working Note 154.  Inderjit Dhillon: "A new O(n^2) algorithm for the symmetric tridiagonal eigenvalue/eigenvector problem", Computer Science Division Technical Report No. UCB/CSD97971, UC Berkeley, May 1997. Note 1 : ZHEEVR calls ZSTEMR when the full spectrum is requested on machines which conform to the ieee754 floating point standard. ZHEEVR calls DSTEBZ and ZSTEIN on nonieee machines and when partial spectrum requests are made. Normal execution of ZSTEMR may create NaNs and infinities and hence may abort due to a floating point exception in environments which do not handle NaNs and infinities in the ieee standard default manner.
Parameters:

JOBZ
JOBZ is CHARACTER*1 = 'N': Compute eigenvalues only; = 'V': Compute eigenvalues and eigenvectors.
RANGERANGE is CHARACTER*1 = 'A': all eigenvalues will be found. = 'V': all eigenvalues in the halfopen interval (VL,VU] will be found. = 'I': the ILth through IUth eigenvalues will be found. For RANGE = 'V' or 'I' and IU  IL < N  1, DSTEBZ and ZSTEIN are called
UPLOUPLO is CHARACTER*1 = 'U': Upper triangle of A is stored; = 'L': Lower triangle of A is stored.
NN is INTEGER The order of the matrix A. N >= 0.
AA is COMPLEX*16 array, dimension (LDA, N) On entry, the Hermitian matrix A. If UPLO = 'U', the leading NbyN upper triangular part of A contains the upper triangular part of the matrix A. If UPLO = 'L', the leading NbyN lower triangular part of A contains the lower triangular part of the matrix A. On exit, the lower triangle (if UPLO='L') or the upper triangle (if UPLO='U') of A, including the diagonal, is destroyed.
LDALDA is INTEGER The leading dimension of the array A. LDA >= max(1,N).
VLVL is DOUBLE PRECISION
VUVU is DOUBLE PRECISION If RANGE='V', the lower and upper bounds of the interval to be searched for eigenvalues. VL < VU. Not referenced if RANGE = 'A' or 'I'.
ILIL is INTEGER
IUIU is INTEGER If RANGE='I', the indices (in ascending order) of the smallest and largest eigenvalues to be returned. 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0. Not referenced if RANGE = 'A' or 'V'.
ABSTOLABSTOL is DOUBLE PRECISION The absolute error tolerance for the eigenvalues. An approximate eigenvalue is accepted as converged when it is determined to lie in an interval [a,b] of width less than or equal to ABSTOL + EPS * max( a,b ) , where EPS is the machine precision. If ABSTOL is less than or equal to zero, then EPS*T will be used in its place, where T is the 1norm of the tridiagonal matrix obtained by reducing A to tridiagonal form. See "Computing Small Singular Values of Bidiagonal Matrices with Guaranteed High Relative Accuracy," by Demmel and Kahan, LAPACK Working Note #3. If high relative accuracy is important, set ABSTOL to DLAMCH( 'Safe minimum' ). Doing so will guarantee that eigenvalues are computed to high relative accuracy when possible in future releases. The current code does not make any guarantees about high relative accuracy, but furutre releases will. See J. Barlow and J. Demmel, "Computing Accurate Eigensystems of Scaled Diagonally Dominant Matrices", LAPACK Working Note #7, for a discussion of which matrices define their eigenvalues to high relative accuracy.
MM is INTEGER The total number of eigenvalues found. 0 <= M <= N. If RANGE = 'A', M = N, and if RANGE = 'I', M = IUIL+1.
WW is DOUBLE PRECISION array, dimension (N) The first M elements contain the selected eigenvalues in ascending order.
ZZ is COMPLEX*16 array, dimension (LDZ, max(1,M)) If JOBZ = 'V', then if INFO = 0, the first M columns of Z contain the orthonormal eigenvectors of the matrix A corresponding to the selected eigenvalues, with the ith column of Z holding the eigenvector associated with W(i). If JOBZ = 'N', then Z is not referenced. Note: the user must ensure that at least max(1,M) columns are supplied in the array Z; if RANGE = 'V', the exact value of M is not known in advance and an upper bound must be used.
LDZLDZ is INTEGER The leading dimension of the array Z. LDZ >= 1, and if JOBZ = 'V', LDZ >= max(1,N).
ISUPPZISUPPZ is INTEGER array, dimension ( 2*max(1,M) ) The support of the eigenvectors in Z, i.e., the indices indicating the nonzero elements in Z. The ith eigenvector is nonzero only in elements ISUPPZ( 2*i1 ) through ISUPPZ( 2*i ). Implemented only for RANGE = 'A' or 'I' and IU  IL = N  1
WORKWORK is COMPLEX*16 array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORKLWORK is INTEGER The length of the array WORK. LWORK >= max(1,2*N). For optimal efficiency, LWORK >= (NB+1)*N, where NB is the max of the blocksize for ZHETRD and for ZUNMTR as returned by ILAENV. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal sizes of the WORK, RWORK and IWORK arrays, returns these values as the first entries of the WORK, RWORK and IWORK arrays, and no error message related to LWORK or LRWORK or LIWORK is issued by XERBLA.
RWORKRWORK is DOUBLE PRECISION array, dimension (MAX(1,LRWORK)) On exit, if INFO = 0, RWORK(1) returns the optimal (and minimal) LRWORK.
LRWORKLRWORK is INTEGER The length of the array RWORK. LRWORK >= max(1,24*N). If LRWORK = 1, then a workspace query is assumed; the routine only calculates the optimal sizes of the WORK, RWORK and IWORK arrays, returns these values as the first entries of the WORK, RWORK and IWORK arrays, and no error message related to LWORK or LRWORK or LIWORK is issued by XERBLA.
IWORKIWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the optimal (and minimal) LIWORK.
LIWORKLIWORK is INTEGER The dimension of the array IWORK. LIWORK >= max(1,10*N). If LIWORK = 1, then a workspace query is assumed; the routine only calculates the optimal sizes of the WORK, RWORK and IWORK arrays, returns these values as the first entries of the WORK, RWORK and IWORK arrays, and no error message related to LWORK or LRWORK or LIWORK is issued by XERBLA.
INFOINFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value > 0: Internal error
Author:

Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
 September 2012
Contributors:

Inderjit Dhillon, IBM Almaden, USA
Osni Marques, LBNL/NERSC, USA
Ken Stanley, Computer Science Division, University of California at Berkeley, USA
Jason Riedy, Computer Science Division, University of California at Berkeley, USA
Definition at line 347 of file zheevr.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.