ztfsm (3)  Linux Manuals
NAME
ztfsm.f 
SYNOPSIS
Functions/Subroutines
subroutine ztfsm (TRANSR, SIDE, UPLO, TRANS, DIAG, M, N, ALPHA, A, B, LDB)
ZTFSM solves a matrix equation (one operand is a triangular matrix in RFP format).
Function/Subroutine Documentation
subroutine ztfsm (characterTRANSR, characterSIDE, characterUPLO, characterTRANS, characterDIAG, integerM, integerN, complex*16ALPHA, complex*16, dimension( 0: * )A, complex*16, dimension( 0: ldb1, 0: * )B, integerLDB)
ZTFSM solves a matrix equation (one operand is a triangular matrix in RFP format).
Purpose:

Level 3 BLAS like routine for A in RFP Format. ZTFSM solves the matrix equation op( A )*X = alpha*B or X*op( A ) = alpha*B where alpha is a scalar, X and B are m by n matrices, A is a unit, or nonunit, upper or lower triangular matrix and op( A ) is one of op( A ) = A or op( A ) = A**H. A is in Rectangular Full Packed (RFP) Format. The matrix X is overwritten on B.
Parameters:

TRANSR
TRANSR is CHARACTER*1 = 'N': The Normal Form of RFP A is stored; = 'C': The Conjugatetranspose Form of RFP A is stored.
SIDESIDE is CHARACTER*1 On entry, SIDE specifies whether op( A ) appears on the left or right of X as follows: SIDE = 'L' or 'l' op( A )*X = alpha*B. SIDE = 'R' or 'r' X*op( A ) = alpha*B. Unchanged on exit.
UPLOUPLO is CHARACTER*1 On entry, UPLO specifies whether the RFP matrix A came from an upper or lower triangular matrix as follows: UPLO = 'U' or 'u' RFP A came from an upper triangular matrix UPLO = 'L' or 'l' RFP A came from a lower triangular matrix Unchanged on exit.
TRANSTRANS is CHARACTER*1 On entry, TRANS specifies the form of op( A ) to be used in the matrix multiplication as follows: TRANS = 'N' or 'n' op( A ) = A. TRANS = 'C' or 'c' op( A ) = conjg( A' ). Unchanged on exit.
DIAGDIAG is CHARACTER*1 On entry, DIAG specifies whether or not RFP A is unit triangular as follows: DIAG = 'U' or 'u' A is assumed to be unit triangular. DIAG = 'N' or 'n' A is not assumed to be unit triangular. Unchanged on exit.
MM is INTEGER On entry, M specifies the number of rows of B. M must be at least zero. Unchanged on exit.
NN is INTEGER On entry, N specifies the number of columns of B. N must be at least zero. Unchanged on exit.
ALPHAALPHA is COMPLEX*16 On entry, ALPHA specifies the scalar alpha. When alpha is zero then A is not referenced and B need not be set before entry. Unchanged on exit.
AA is COMPLEX*16 array, dimension (N*(N+1)/2) NT = N*(N+1)/2. On entry, the matrix A in RFP Format. RFP Format is described by TRANSR, UPLO and N as follows: If TRANSR='N' then RFP A is (0:N,0:K1) when N is even; K=N/2. RFP A is (0:N1,0:K) when N is odd; K=N/2. If TRANSR = 'C' then RFP is the Conjugatetranspose of RFP A as defined when TRANSR = 'N'. The contents of RFP A are defined by UPLO as follows: If UPLO = 'U' the RFP A contains the NT elements of upper packed A either in normal or conjugatetranspose Format. If UPLO = 'L' the RFP A contains the NT elements of lower packed A either in normal or conjugatetranspose Format. The LDA of RFP A is (N+1)/2 when TRANSR = 'C'. When TRANSR is 'N' the LDA is N+1 when N is even and is N when is odd. See the Note below for more details. Unchanged on exit.
BB is COMPLEX*16 array, dimension (LDB,N) Before entry, the leading m by n part of the array B must contain the righthand side matrix B, and on exit is overwritten by the solution matrix X.
LDBLDB is INTEGER On entry, LDB specifies the first dimension of B as declared in the calling (sub) program. LDB must be at least max( 1, m ). Unchanged on exit.
Author:

Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
 September 2012
Further Details:

We first consider Standard Packed Format when N is even. We give an example where N = 6. AP is Upper AP is Lower 00 01 02 03 04 05 00 11 12 13 14 15 10 11 22 23 24 25 20 21 22 33 34 35 30 31 32 33 44 45 40 41 42 43 44 55 50 51 52 53 54 55 Let TRANSR = 'N'. RFP holds AP as follows: For UPLO = 'U' the upper trapezoid A(0:5,0:2) consists of the last three columns of AP upper. The lower triangle A(4:6,0:2) consists of conjugatetranspose of the first three columns of AP upper. For UPLO = 'L' the lower trapezoid A(1:6,0:2) consists of the first three columns of AP lower. The upper triangle A(0:2,0:2) consists of conjugatetranspose of the last three columns of AP lower. To denote conjugate we place  above the element. This covers the case N even and TRANSR = 'N'. RFP A RFP A    03 04 05 33 43 53   13 14 15 00 44 54  23 24 25 10 11 55 33 34 35 20 21 22  00 44 45 30 31 32   01 11 55 40 41 42    02 12 22 50 51 52 Now let TRANSR = 'C'. RFP A in both UPLO cases is just the conjugate transpose of RFP A above. One therefore gets: RFP A RFP A           03 13 23 33 00 01 02 33 00 10 20 30 40 50           04 14 24 34 44 11 12 43 44 11 21 31 41 51           05 15 25 35 45 55 22 53 54 55 22 32 42 52 We next consider Standard Packed Format when N is odd. We give an example where N = 5. AP is Upper AP is Lower 00 01 02 03 04 00 11 12 13 14 10 11 22 23 24 20 21 22 33 34 30 31 32 33 44 40 41 42 43 44 Let TRANSR = 'N'. RFP holds AP as follows: For UPLO = 'U' the upper trapezoid A(0:4,0:2) consists of the last three columns of AP upper. The lower triangle A(3:4,0:1) consists of conjugatetranspose of the first two columns of AP upper. For UPLO = 'L' the lower trapezoid A(0:4,0:2) consists of the first three columns of AP lower. The upper triangle A(0:1,1:2) consists of conjugatetranspose of the last two columns of AP lower. To denote conjugate we place  above the element. This covers the case N odd and TRANSR = 'N'. RFP A RFP A   02 03 04 00 33 43  12 13 14 10 11 44 22 23 24 20 21 22  00 33 34 30 31 32   01 11 44 40 41 42 Now let TRANSR = 'C'. RFP A in both UPLO cases is just the conjugate transpose of RFP A above. One therefore gets: RFP A RFP A          02 12 22 00 01 00 10 20 30 40 50          03 13 23 33 11 33 11 21 31 41 51          04 14 24 34 44 43 44 22 32 42 52
Definition at line 298 of file ztfsm.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.