ipmiutil (8) - Linux Manuals

ipmiutil: a meta-command to invoke various IPMI functions.

Command to display ipmiutil manual in Linux: $ man 8 ipmiutil

NAME

ipmiutil - a meta-command to invoke various IPMI functions.

SYNOPSIS

ipmiutil <command> [-x -NUPREFJTVY] [other command options]

DESCRIPTION

This utility performs various IPMI functions. Each of the individual commands in the ipmiutil project can be invoked via this meta-command. The <command> is one of the following:
alarms   show/set the front panel alarm LEDs and relays
leds     show/set the front panel alarm LEDs and relays
cmd      send a specified raw IPMI command to the BMC
config   list/save/restore BMC configuration parameters
dcmi     get/set DCMI parameters
discover    discover all IPMI servers on this LAN
ekanalyzer  run FRU-EKeying analyzer on FRU files (deprecated, see fru)
events   decode IPMI events and display them
firewall show/set firmware firewall functions
fru      show decoded FRU inventory data, write asset tag
fwum     OEM firmware update manager extensions
getevt   get IPMI events and display them, event daemon
getevent get IPMI events and display them, event daemon
health   check and show the basic health of the IPMI BMC
hpm      HPM firmware update manager extensions
lan      show/set IPMI LAN parameters and PEF table
picmg    show/set picmg extended functions
reset    cause the BMC to reset or power down the system
sel      show/clear firmware System Event Log records
sensor   show Sensor Data Records, readings, thresholds
serial   show/set IPMI Serial & Terminal Mode parameters
sol      start/stop an SOL console session
smcoem   SuperMicro OEM functions
sunoem   Sun OEM functions
delloem  Dell OEM functions
tsol     Tyan SOL console start/stop session
wdt      show/set/reset the watchdog timer
For help on each command (e.g. 'sel'), enter:
ipmiutil sel -?
For man pages on each command, its man page is named "i<command>", or refer to SEE ALSO below.

This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface if -N is used.

OPTIONS

Command options are described in the man page for each command. Below are a few of the common options.

-x: Causes extra debug messages to be displayed.
-N nodename: Nodename or IP address of the remote target system. If a nodename is specified, IPMI LAN interface is used. Otherwise the local system management interface is used.
-U rmt_user: Remote username for the nodename given. The default is a null username.
-P/-R rmt_pswd: Remote password for the nodename given. The default is a null password.
-E: Use the remote password from Environment variable IPMI_PASSWORD.
-F drv_t: Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The default is to detect any available driver type and use it.
-J: Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. Default is 3.
-T: Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
-V: Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
-Y: Yes, do prompt the user for the IPMI LAN remote password. Alternatives for the password are -E or -P.

EXAMPLES

ipmiutil sel
Shows the IPMI System Event Log entries.

ipmiutil wdt
Shows the watchdog timer values.

WARNINGS

See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

COPYRIGHT

See the file COPYING in the distribution for more details regarding redistribution.

This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

Andy Cress <arcress at users.sourceforge.net>