rotctld (8) - Linux Manuals
rotctld: Hamlib TCP rotator control daemon
rotctld - Hamlib TCP rotator control daemon
DESCRIPTIONThe rotctld program is an NEW Hamlib rotator control daemon ready for testing that handles client requests via TCP sockets. This allows multiple user programs to share one rotator (this needs testing), except on Win32 where pthreads are not available. Multiple rotators can be controlled on different TCP ports by use of multiple rotctld processes. The syntax of the commands are the same as rotctl. It is hoped that rotctld will be especially useful for client authors using languages such as Perl, Python, PHP, and others.
rotctld communicates to a client through a TCP socket using text commands shared with rotctl. The protocol is simple, commands are sent to rotctld on one line and rotctld responds to "get" commands with the requested values, one per line, when successful, otherwise, it responds with one line "RPRT x", where x is a negative number indicating the error code. Commands that do not return values respond with the line "RPRT x", where x is zero when successful, otherwise is a regative number indicating the error code. Each line is terminated with a newline '\n' character. This protocol is primarily for use by the NET rotctl (rot model 2) backend.
A separate Extended Response protocol extends the above behavior by echoing the received command string as a header, any returned values as a key: value pair, and the "RPRT x" string as the end of response marker which includes the Hamlib success or failure value. See the PROTOCOL section for details. Consider using this protocol for clients that will interact with rotctld directly through a TCP socket.
Keep in mind that Hamlib is BETA level software. While a lot of backend libraries lack complete rotator support, the basic functions are usually well supported. The API may change without publicized notice, while an advancement of the minor version (e.g. 1.1.x to 1.2.x) indicates such a change.
OPTIONSThis program follows the usual GNU command line syntax, with long options starting with two dashes ('-').
Here is a summary of the supported options:
- -m, --model=id
- Select rotator model number. See -l, "list" option below.
- -r, --rot-file=device
- Use device as the file name of the port the rotator is connected. Often a serial port, but could be a USB to serial adapter or USB port device. Typically /dev/ttyS0, /dev/ttyS1, /dev/ttyUSB0, etc. on Linux or COM1, COM2, etc. on Win32.
- -s, --serial-speed=baud
- Set serial speed to baud rate. Uses maximum serial speed from rotor backend capabilities (set by -m above) as the default.
- -T, --listen-addr=IPADDR
Use IPADDR as the listening IP address. The default is ANY.
N.B.: This option seems mandatory on Win32, eg: -T 127.0.0.1
- -t, --port=number
Use number as the TCP listening port. The default is 4533.
N.B.: As rigctld's default port is 4532, it is advisable to use odd numbered ports for rotctld, e.g. 4533, 4535, 4537, etc.
N.B.: This option seems mandatory on Win32, eg: -t 4533
- -L, --show-conf
- List all config parameters for the rotator defined with -m above.
- -C, --set-conf=parm=val[,parm=val]*
Set config parameter. e.g. --set-conf=stop_bits=2
Use -L option for a list.
- -l, --list
List all model numbers defined in Hamlib and exit. As of 220.127.116.11
the list is sorted by model number.
N.B. In Linux the list can be scrolled back using Shift-PageUp/ Shift-PageDown, or using the scrollbars of a virtual terminal in X or the cmd window in Windows. The output can be piped to 'more' or 'less', e.g. 'rotctld -l | more'.
- -u, --dump-caps
- Dump capabilities for the radio defined with -m above and exit.
- -e, --end-marker
Use END marker in rotctld protocol.
N.B.: This option should be considered obsolete. Please consider using the Extended Response protocol instead (see PROTOCOL below). This option will be removed in a future Hamlib release.
- -v, --verbose
- Set verbose mode, cumulative (see DIAGNOSTICS below).
- -h, --help
- Show a summary of these options and exit.
- -V, --version
- Show the version of rotctld and exit.
N.B. Some options may not be implemented by a given backend and will return an error. This is most likely to occur with the --set-conf and --show-conf options.
COMMANDSCommands can be sent over the TCP socket either as a single char, or as a long command name plus the value(s) space separated on one '\n' terminated line. See PROTOCOL.
Since most of the Hamlib operations have a set and a get method, an upper case letter will be used for set methods whereas the corresponding lower case letter refers to the get method. Each operation also has a long name; prepend a backslash to send a long command name.
Example (Perl): `print $socket "\\dump_caps\n";' to see what the rotor's backend can do (NOTE: In Perl and many other languages a '\' will need to be escaped with a preceding '\' so that even though two backslash characters appear in the code, only one will be passed to rotctld. This is a possible bug, beware!).
Please note that the backend for the rotator to be controlled, or the rotator itself may not support some commands. In that case, the operation will fail with a Hamlib error message.
Here is a summary of the supported commands (In the case of "set" commands the quoted string is replaced by the value in the description. In the case of "get" commands the quoted string is the key name of the value returned.):
- P, set_pos 'Azimuth' 'Elevation'
- Set position: Azimuth and Elevation as double precision floating point values.
- p, get_pos
- Get position: 'Azimuth' and 'Elevation' as double precision floating point values.
- M, move 'Direction' 'Speed'
Move the rotator in a specific direction at the given rate.
Values are integers where Direction is defined as 2 = Up, 4 = Down, 8 = Left, and 16 = Right. Speed is an integer between 1 and 100. Not all backends that implement the move command use the Speed value. At this time only the gs232a utilizes the Speed parameter.
- S, stop
- Stop the rotator.
- K, park
- Park the antenna.
- C, set_conf 'Token' 'Value'
Set Token to Value.
Backend dependent. Needs testing.
- R, reset 'Reset'
Reset the rotator.
Integer value of '1' for Reset All.
- _, get_info
Get misc information about the rotator.
At the moment returns 'Model Name'.
- w, send_cmd 'Cmd'
Send raw command string to rotator.
For binary protocols enter values as \0xAA\0xBB. Expect a 'Reply' from the rotator which will likely be a binary block or an ASCII string.
These commands offer conversions of Degrees Minutes Seconds to other formats, Maidenhead square locator conversions and distance and azimuth conversions.
- L, lonlat2loc 'Longitude' 'Latitude' 'Loc Len [2-12]'
Returns the Maidenhead locator for the given 'Longitude' and 'Latitude'.
Both are floating point values. The precision of the returned square is controlled by 'Loc Len' which should be an even numbered integer value between 2 and 12.
For example, "+L -170.000000 -85.000000 12\n" returns "Locator: AA55AA00AA00\n".
- l, loc2lonlat 'Locator'
Returns 'Longitude' and 'Latitude' in decimal degrees at the approximate
center of the requested grid square (despite the use of double precision
variables internally, some rounding error occurs). West longitude is
expressed as a negative value. South latitude is expressed as a negative
value. Locator can be from 2 to 12 characters in length.
For example, "+l AA55AA00AA00\n" returns "Longitude: -169.999983\nLatitude: -84.999991\n".
- D, dms2dec 'Degrees' 'Minutes' 'Seconds' 'S/W'
Returns 'Dec Degrees', a signed floating point value.
Degrees and Minutes are integer values and Seconds is a floating point value. S/W is a flag with '1' indicating South latitude or West longitude and '0' North or East (the flag is needed as computers don't recognize a signed zero even though only the Degrees value only is typically signed in DMS notation).
- d, dec2dms 'Dec Degrees'
Returns 'Degrees' 'Minutes' 'Seconds' 'S/W'.
Values are as in dms2dec above.
- E, dmmm2dec 'Degrees' 'Dec Minutes' 'S/W'
Returns 'Dec Degrees', a signed floating point value.
Degrees is an integer value and Minutes is a floating point value. S/W is a flag with '1' indicating South latitude or West longitude and '0' North or East (the flag is needed as computers don't recognize a signed zero even though only the Degrees value only is typically signed in DMS notation).
- e, dec2dmmm 'Dec Deg'
Returns 'Degrees' 'Minutes' 'S/W'.
Values are as in dmmm2dec above.
- B, qrb 'Lon 1' 'Lat 1' 'Lon 2' 'Lat 2'
Returns 'Distance' 'Azimuth' where Distance is in km and Azimuth is in degrees.
All Lon/Lat values are signed floating point numbers.
- A, a_sp2a_lp 'Short Path Deg'
Returns 'Long Path Deg' or -RIG_EINVAL upon input error..
Both are floating point values within the range 0.00 to 360.00.
- a, d_sp2d_lp 'Short Path km'
Returns 'Long Path km'.
Both are floating point values.
The rotctld protocol is intentionally simple. Commands are entered on a single line with any needed values. In Perl, reliable results are obtained by terminating each command string with a newline character, '\n'.
Example set (Perl code):
print $socket "P 135 10\n";
print $socket "\\set_pos 135 10\n"; # escape leading '\'
A one line response will be sent as a reply to set commands, "RPRT x\n" where x is the Hamlib error code with '0' indicating success of the command.
Responses from rotctld get commands are text values and match the same tokens used in the set commands. Each value is returned on its own line. On error the string "RPRT x\n" is returned where x is the Hamlib error code.
Example get (Perl code):
print $socket "p\n";
Most get functions return one to three values. A notable exception is the \dump_caps function which returns many lines of key:value pairs.
This protocol is primarily used by the NET rotctl (rotctl model 2) backend which allows applications already written for Hamlib's C API to take advantage of rotctld without the need of rewriting application code. An application's user can select rotor model 2 ("NET rotctl") and then set rot_pathname to "localhost:4533" or other network host:port (set by the -t option above).
Extended Response Protocol
An EXPERIMENTAL Extended Response protocol has been introduced into rotctld as of February 10, 2010. This protocol adds several rules to the strings returned by rotctld and adds a rule for the command syntax.
1. The command received by rotctld is echoed with its long command name followed by the value(s) (if any) received from the client terminated by the specified response separator as the first record of the response.
2. The last record of each block is the string "RPRT x\n" where x is the numeric return value of the Hamlib backend function that was called by the command.
3. Any records consisting of data values returned by the rotor backend are prepended by a string immediately followed by a colon then a space and then the value terminated by the response separator. e.g. "Azimuth: 90.000000\n" when the command was prepended by '+'.
4. All commands received will be acknowledged by rotctld with records from rules 1 and 2. Records from rule 3 are only returned when data values must be returned to the client.
An example response to a +P command command sent from the shell prompt (note the prepended '+'):
$ echo "+P 90 45" | nc -w 1 localhost 4533
set_pos: 90 45
In this case the long command name and values are returned on the first line and the second line contains the end of block marker and the numeric rig backend return value indicating success.
An example response to a +\get_pos query:
$ echo "+\get_pos" | nc -w 1 localhost 4533
In this case, as no value is passed to rotctld, the first line consists only of the long command name. The final line shows that the command was processed successfully by the rotor backend.
Invoking the Extended Response protocol requires prepending a command with a punctuation character. As shown in the examples above, prepending a '+' character to the command results in the responses being separated by a newline character ('\n'). Any other punctuation character recognized by the C ispunct() function except '\', '?', or '_' will cause that character to become the response separator and the entire response will be on one line.
Separator character summary:
Each record of the response is appended with a newline ('\n').
- ';', '|', or ','
Each record of the response is appended by the given character resulting in entire response on one line.
Common record separators for text representations of spreadsheet data, etc.
Reserved for 'help' in rotctl short command
Reserved for \get_info short command
Reserved for comments when reading a command file script
Other punctuation characters have not been tested! Use at your own risk.
For example, invoking a ;\get_pos query with a leading ';' returns:
get_pos:;Azimuth: 90.000000;Elevation: 45.000000;RPRT 0
Or, using the pipe character '|' returns:
get_pos:|Azimuth: 90.000000|Elevation: 45.000000|RPRT 0
And a \set_pos command prepended with a '|' returns:
set_pos: 135 22.5|RPRT 0
Such a format will allow reading a response as a single event using a preferred response separator. Other punctuation characters have not been tested!
All commands with the exception of \set_conf have been tested with the Extended Response protocol and the included testrotctld.pl script.
EXAMPLESStart rotctld for a Ham IV rotor with the RotorEZ installed using a USB-to-serial adapter and backgrounding on Linux:
$ rotctld -m 401 -r /dev/ttyUSB1 &
Start rotctld for RotorEZ using COM3 on Win32:
C:\> rotctld -m 401 -r COM3 -T 127.0.0.1 -t 4533
Connect to the already running rotctld, and set position to 135.0 degrees azimuth and 30.0 degrees elevation with a 1 second read timeout from the shell prompt:
$ echo "\set_pos 135.0 30.0" | nc -w 1 localhost 4533
Connect to a running rotctld with rotctl on the local host on POSIX:
$ rotctl -m2
and on Win32:
DIAGNOSTICSThe -v, --version option allows different levels of diagnostics to be output to stderr and correspond to -v for BUG, -vv for ERR, -vvv for WARN, -vvvv for VERBOSE, or -vvvvv for TRACE.
A given verbose level is useful for providing needed debugging information to the email address below. For example, TRACE output shows all of the values sent to and received from the rotator which is very useful for rotator backend library development and may be requested by the developers. See the README.betatester and README.developer files for more information.
SECURITYNo authentication whatsoever; DO NOT leave this TCP port open wide to the Internet. Please ask if stronger security is needed or consider using an SSH tunnel.
BUGSThe daemon is not detaching and backgrounding itself.
REPORTING BUGSReport bugs to <hamlib-developer [at] lists.sourceforge.net>.
AUTHORSWritten by Stephane Fillod, Nate Bargmann, and the Hamlib Group
COPYRIGHTCopyright © 2000-2009 Stephane Fillod
Copyright © 2011-2012 Nate Bargmann
Copyright © 2000-2009 the Hamlib Group.