IPARMQ (3)  Linux Manuals
NAME
iparmq.f 
SYNOPSIS
Functions/Subroutines
INTEGER function iparmq (ISPEC, NAME, OPTS, N, ILO, IHI, LWORK)
IPARMQ
Function/Subroutine Documentation
INTEGER function iparmq (integerISPEC, character, dimension( * )NAME, character, dimension( * )OPTS, integerN, integerILO, integerIHI, integerLWORK)
IPARMQ
Purpose:

This program sets problem and machine dependent parameters useful for xHSEQR and its subroutines. It is called whenever ILAENV is called with 12 <= ISPEC <= 16
Parameters:

ISPEC
ISPEC is integer scalar ISPEC specifies which tunable parameter IPARMQ should return. ISPEC=12: (INMIN) Matrices of order nmin or less are sent directly to xLAHQR, the implicit double shift QR algorithm. NMIN must be at least 11. ISPEC=13: (INWIN) Size of the deflation window. This is best set greater than or equal to the number of simultaneous shifts NS. Larger matrices benefit from larger deflation windows. ISPEC=14: (INIBL) Determines when to stop nibbling and invest in an (expensive) multishift QR sweep. If the aggressive early deflation subroutine finds LD converged eigenvalues from an order NW deflation window and LD.GT.(NW*NIBBLE)/100, then the next QR sweep is skipped and early deflation is applied immediately to the remaining active diagonal block. Setting IPARMQ(ISPEC=14) = 0 causes TTQRE to skip a multishift QR sweep whenever early deflation finds a converged eigenvalue. Setting IPARMQ(ISPEC=14) greater than or equal to 100 prevents TTQRE from skipping a multishift QR sweep. ISPEC=15: (NSHFTS) The number of simultaneous shifts in a multishift QR iteration. ISPEC=16: (IACC22) IPARMQ is set to 0, 1 or 2 with the following meanings. 0: During the multishift QR sweep, xLAQR5 does not accumulate reflections and does not use matrixmatrix multiply to update the farfromdiagonal matrix entries. 1: During the multishift QR sweep, xLAQR5 and/or xLAQRaccumulates reflections and uses matrixmatrix multiply to update the farfromdiagonal matrix entries. 2: During the multishift QR sweep. xLAQR5 accumulates reflections and takes advantage of 2by2 block structure during matrixmatrix multiplies. (If xTRMM is slower than xGEMM, then IPARMQ(ISPEC=16)=1 may be more efficient than IPARMQ(ISPEC=16)=2 despite the greater level of arithmetic work implied by the latter choice.)
NAMENAME is character string Name of the calling subroutine
OPTSOPTS is character string This is a concatenation of the string arguments to TTQRE.
NN is integer scalar N is the order of the Hessenberg matrix H.
ILOILO is INTEGER
IHIIHI is INTEGER It is assumed that H is already upper triangular in rows and columns 1:ILO1 and IHI+1:N.
LWORKLWORK is integer scalar The amount of workspace available.
Author:

Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
 November 2011
Further Details:

Little is known about how best to choose these parameters. It is possible to use different values of the parameters for each of CHSEQR, DHSEQR, SHSEQR and ZHSEQR. It is probably best to choose different parameters for different matrices and different parameters at different times during the iteration, but this has not been implemented  yet. The best choices of most of the parameters depend in an illunderstood way on the relative execution rate of xLAQR3 and xLAQR5 and on the nature of each particular eigenvalue problem. Experiment may be the only practical way to determine which choices are most effective. Following is a list of default values supplied by IPARMQ. These defaults may be adjusted in order to attain better performance in any particular computational environment. IPARMQ(ISPEC=12) The xLAHQR vs xLAQR0 crossover point. Default: 75. (Must be at least 11.) IPARMQ(ISPEC=13) Recommended deflation window size. This depends on ILO, IHI and NS, the number of simultaneous shifts returned by IPARMQ(ISPEC=15). The default for (IHIILO+1).LE.500 is NS. The default for (IHIILO+1).GT.500 is 3*NS/2. IPARMQ(ISPEC=14) Nibble crossover point. Default: 14. IPARMQ(ISPEC=15) Number of simultaneous shifts, NS. a multishift QR iteration. If IHIILO+1 is ... greater than ...but less ... the or equal to ... than default is 0 30 NS = 2+ 30 60 NS = 4+ 60 150 NS = 10 150 590 NS = ** 590 3000 NS = 64 3000 6000 NS = 128 6000 infinity NS = 256 (+) By default matrices of this order are passed to the implicit double shift routine xLAHQR. See IPARMQ(ISPEC=12) above. These values of NS are used only in case of a rare xLAHQR failure. (**) The asterisks (**) indicate an adhoc function increasing from 10 to 64. IPARMQ(ISPEC=16) Select structured matrix multiply. (See ISPEC=16 above for details.) Default: 3.
Definition at line 215 of file iparmq.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.