shseqr (l)  Linux Manuals
shseqr: SHSEQR compute the eigenvalues of a Hessenberg matrix H and, optionally, the matrices T and Z from the Schur decomposition H = Z T Z**T, where T is an upper quasitriangular matrix (the Schur form), and Z is the orthogonal matrix of Schur vectors
NAME
SHSEQR  SHSEQR compute the eigenvalues of a Hessenberg matrix H and, optionally, the matrices T and Z from the Schur decomposition H = Z T Z**T, where T is an upper quasitriangular matrix (the Schur form), and Z is the orthogonal matrix of Schur vectorsSYNOPSIS
 SUBROUTINE SHSEQR(
 JOB, COMPZ, N, ILO, IHI, H, LDH, WR, WI, Z, LDZ, WORK, LWORK, INFO )
 INTEGER IHI, ILO, INFO, LDH, LDZ, LWORK, N
 CHARACTER COMPZ, JOB
 REAL H( LDH, * ), WI( * ), WORK( * ), WR( * ), Z( LDZ, * )
PURPOSE
SHSEQR computes the eigenvalues of a Hessenberg matrix H
and, optionally, the matrices T and Z from the Schur decomposition
H
Schur form), and Z is the orthogonal matrix of Schur vectors.
Optionally Z may be postmultiplied into an input orthogonal
matrix Q so that this routine can give the Schur factorization
of a matrix A which has been reduced to the Hessenberg form H
by the orthogonal matrix Q:
ARGUMENTS
 JOB (input) CHARACTER*1

= aqEaq: compute eigenvalues only;
= aqSaq: compute eigenvalues and the Schur form T. COMPZ (input) CHARACTER*1
= aqNaq: no Schur vectors are computed;
= aqIaq: Z is initialized to the unit matrix and the matrix Z of Schur vectors of H is returned; = aqVaq: Z must contain an orthogonal matrix Q on entry, and the product Q*Z is returned.  N (input) INTEGER
 The order of the matrix H. N .GE. 0.
 ILO (input) INTEGER
 IHI (input) INTEGER It is assumed that H is already upper triangular in rows and columns 1:ILO1 and IHI+1:N. ILO and IHI are normally set by a previous call to SGEBAL, and then passed to SGEHRD when the matrix output by SGEBAL is reduced to Hessenberg form. Otherwise ILO and IHI should be set to 1 and N respectively. If N.GT.0, then 1.LE.ILO.LE.IHI.LE.N. If N = 0, then ILO = 1 and IHI = 0.
 H (input/output) REAL array, dimension (LDH,N)
 On entry, the upper Hessenberg matrix H. On exit, if INFO = 0 and JOB = aqSaq, then H contains the upper quasitriangular matrix T from the Schur decomposition (the Schur form); 2by2 diagonal blocks (corresponding to complex conjugate pairs of eigenvalues) are returned in standard form, with H(i,i) = H(i+1,i+1) and H(i+1,i)*H(i,i+1).LT.0. If INFO = 0 and JOB = aqEaq, the contents of H are unspecified on exit. (The output value of H when INFO.GT.0 is given under the description of INFO below.) Unlike earlier versions of SHSEQR, this subroutine may explicitly H(i,j) = 0 for i.GT.j and j = 1, 2, ... ILO1 or j = IHI+1, IHI+2, ... N.
 LDH (input) INTEGER
 The leading dimension of the array H. LDH .GE. max(1,N).
 WR (output) REAL array, dimension (N)
 WI (output) REAL array, dimension (N) The real and imaginary parts, respectively, of the computed eigenvalues. If two eigenvalues are computed as a complex conjugate pair, they are stored in consecutive elements of WR and WI, say the ith and (i+1)th, with WI(i) .GT. 0 and WI(i+1) .LT. 0. If JOB = aqSaq, the eigenvalues are stored in the same order as on the diagonal of the Schur form returned in H, with WR(i) = H(i,i) and, if H(i:i+1,i:i+1) is a 2by2 diagonal block, WI(i) = sqrt(H(i+1,i)*H(i,i+1)) and WI(i+1) = WI(i).
 Z (input/output) REAL array, dimension (LDZ,N)
 If COMPZ = aqNaq, Z is not referenced. If COMPZ = aqIaq, on entry Z need not be set and on exit, if INFO = 0, Z contains the orthogonal matrix Z of the Schur vectors of H. If COMPZ = aqVaq, on entry Z must contain an NbyN matrix Q, which is assumed to be equal to the unit matrix except for the submatrix Z(ILO:IHI,ILO:IHI). On exit, if INFO = 0, Z contains Q*Z. Normally Q is the orthogonal matrix generated by SORGHR after the call to SGEHRD which formed the Hessenberg matrix H. (The output value of Z when INFO.GT.0 is given under the description of INFO below.)
 LDZ (input) INTEGER
 The leading dimension of the array Z. if COMPZ = aqIaq or COMPZ = aqVaq, then LDZ.GE.MAX(1,N). Otherwize, LDZ.GE.1.
 WORK (workspace/output) REAL array, dimension (LWORK)
 On exit, if INFO = 0, WORK(1) returns an estimate of the optimal value for LWORK. LWORK (input) INTEGER The dimension of the array WORK. LWORK .GE. max(1,N) is sufficient and delivers very good and sometimes optimal performance. However, LWORK as large as 11*N may be required for optimal performance. A workspace query is recommended to determine the optimal workspace size. If LWORK = 1, then SHSEQR does a workspace query. In this case, SHSEQR checks the input parameters and estimates the optimal workspace size for the given values of N, ILO and IHI. The estimate is returned in WORK(1). No error message related to LWORK is issued by XERBLA. Neither H nor Z are accessed.
 INFO (output) INTEGER

= 0: successful exit
value
the eigenvalues. Elements 1:ilo1 and i+1:n of WR and WI contain those eigenvalues which have been successfully computed. (Failures are rare.) If INFO .GT. 0 and JOB = aqEaq, then on exit, the remaining unconverged eigenvalues are the eigen values of the upper Hessenberg matrix rows and columns ILO through INFO of the final, output value of H. If INFO .GT. 0 and JOB = aqSaq, then on exit  (*) (initial value of H)*U = U*(final value of H)

where U is an orthogonal matrix. The final
value of H is upper Hessenberg and quasitriangular
in rows and columns INFO+1 through IHI.
If INFO .GT. 0 and COMPZ = aqVaq, then on exit
(final value of Z) = (initial value of Z)*U
where U is the orthogonal matrix in (*) (regard
less of the value of JOB.)
If INFO .GT. 0 and COMPZ = aqIaq, then on exit
(final value of Z) = U
where U is the orthogonal matrix in (*) (regard
less of the value of JOB.)
If INFO .GT. 0 and COMPZ = aqNaq, then Z is not
accessed.