sstebz (l)  Linux Manuals
sstebz: computes the eigenvalues of a symmetric tridiagonal matrix T
NAME
SSTEBZ  computes the eigenvalues of a symmetric tridiagonal matrix TSYNOPSIS
 SUBROUTINE SSTEBZ(
 RANGE, ORDER, N, VL, VU, IL, IU, ABSTOL, D, E, M, NSPLIT, W, IBLOCK, ISPLIT, WORK, IWORK, INFO )
 CHARACTER ORDER, RANGE
 INTEGER IL, INFO, IU, M, N, NSPLIT
 REAL ABSTOL, VL, VU
 INTEGER IBLOCK( * ), ISPLIT( * ), IWORK( * )
 REAL D( * ), E( * ), W( * ), WORK( * )
PURPOSE
SSTEBZ computes the eigenvalues of a symmetric tridiagonal matrix T. The user may ask for all eigenvalues, all eigenvalues in the halfopen interval (VL, VU], or the ILth through IUth eigenvalues.To avoid overflow, the matrix must be scaled so that its
largest element is no greater than overflow**(1/2) *
underflow**(1/4) in absolute value, and for greatest
accuracy, it should not be much smaller than that.
See W. Kahan "Accurate Eigenvalues of a Symmetric Tridiagonal Matrix", Report CS41, Computer Science Dept., Stanford
University, July 21, 1966.
ARGUMENTS
 RANGE (input) CHARACTER*1

= aqAaq: ("All") all eigenvalues will be found.
= aqVaq: ("Value") all eigenvalues in the halfopen interval (VL, VU] will be found. = aqIaq: ("Index") the ILth through IUth eigenvalues (of the entire matrix) will be found.  ORDER (input) CHARACTER*1
 = aqBaq: ("By Block") the eigenvalues will be grouped by splitoff block (see IBLOCK, ISPLIT) and ordered from smallest to largest within the block. = aqEaq: ("Entire matrix") the eigenvalues for the entire matrix will be ordered from smallest to largest.
 N (input) INTEGER
 The order of the tridiagonal matrix T. N >= 0.
 VL (input) REAL
 VU (input) REAL If RANGE=aqVaq, the lower and upper bounds of the interval to be searched for eigenvalues. Eigenvalues less than or equal to VL, or greater than VU, will not be returned. VL < VU. Not referenced if RANGE = aqAaq or aqIaq.
 IL (input) INTEGER
 IU (input) INTEGER If RANGE=aqIaq, the indices (in ascending order) of the smallest and largest eigenvalues to be returned. 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0. Not referenced if RANGE = aqAaq or aqVaq.
 ABSTOL (input) REAL
 The absolute tolerance for the eigenvalues. An eigenvalue (or cluster) is considered to be located if it has been determined to lie in an interval whose width is ABSTOL or less. If ABSTOL is less than or equal to zero, then ULP*T will be used, where T means the 1norm of T. Eigenvalues will be computed most accurately when ABSTOL is set to twice the underflow threshold 2*SLAMCH(aqSaq), not zero.
 D (input) REAL array, dimension (N)
 The n diagonal elements of the tridiagonal matrix T.
 E (input) REAL array, dimension (N1)
 The (n1) offdiagonal elements of the tridiagonal matrix T.
 M (output) INTEGER
 The actual number of eigenvalues found. 0 <= M <= N. (See also the description of INFO=2,3.)
 NSPLIT (output) INTEGER
 The number of diagonal blocks in the matrix T. 1 <= NSPLIT <= N.
 W (output) REAL array, dimension (N)
 On exit, the first M elements of W will contain the eigenvalues. (SSTEBZ may use the remaining NM elements as workspace.)
 IBLOCK (output) INTEGER array, dimension (N)
 At each row/column j where E(j) is zero or small, the matrix T is considered to split into a block diagonal matrix. On exit, if INFO = 0, IBLOCK(i) specifies to which block (from 1 to the number of blocks) the eigenvalue W(i) belongs. (SSTEBZ may use the remaining NM elements as workspace.)
 ISPLIT (output) INTEGER array, dimension (N)
 The splitting points, at which T breaks up into submatrices. The first submatrix consists of rows/columns 1 to ISPLIT(1), the second of rows/columns ISPLIT(1)+1 through ISPLIT(2), etc., and the NSPLITth consists of rows/columns ISPLIT(NSPLIT1)+1 through ISPLIT(NSPLIT)=N. (Only the first NSPLIT elements will actually be used, but since the user cannot know a priori what value NSPLIT will have, N words must be reserved for ISPLIT.)
 WORK (workspace) REAL array, dimension (4*N)
 IWORK (workspace) INTEGER array, dimension (3*N)
 INFO (output) INTEGER

= 0: successful exit
< 0: if INFO = i, the ith argument had an illegal value
> 0: some or all of the eigenvalues failed to converge or
were not computed:
=1 or 3: Bisection failed to converge for some eigenvalues; these eigenvalues are flagged by a negative block number. The effect is that the eigenvalues may not be as accurate as the absolute and relative tolerances. This is generally caused by unexpectedly inaccurate arithmetic. =2 or 3: RANGE=aqIaq only: Not all of the eigenvalues
IL:IU were found.
Effect: M < IU+1IL
Cause: nonmonotonic arithmetic, causing the Sturm sequence to be nonmonotonic. Cure: recalculate, using RANGE=aqAaq, and pick
out eigenvalues IL:IU. In some cases, increasing the PARAMETER "FUDGE" may make things work. = 4: RANGE=aqIaq, and the Gershgorin interval initially used was too small. No eigenvalues were computed. Probable cause: your machine has sloppy floatingpoint arithmetic. Cure: Increase the PARAMETER "FUDGE", recompile, and try again.
PARAMETERS
 RELFAC REAL, default = 2.0e0
 The relative tolerance. An interval (a,b] lies within "relative tolerance" if ba < RELFAC*ulp*max(a,b), where "ulp" is the machine precision (distance from 1 to the next larger floating point number.)
 FUDGE REAL, default = 2

A "fudge factor" to widen the Gershgorin intervals. Ideally,
a value of 1 should work, but on machines with sloppy
arithmetic, this needs to be larger. The default for
publicly released versions should be large enough to handle
the worst machine around. Note that this has no effect
on accuracy of the solution.