sstevr (l)  Linux Manuals
sstevr: computes selected eigenvalues and, optionally, eigenvectors of a real symmetric tridiagonal matrix T
NAME
SSTEVR  computes selected eigenvalues and, optionally, eigenvectors of a real symmetric tridiagonal matrix TSYNOPSIS
 SUBROUTINE SSTEVR(
 JOBZ, RANGE, N, D, E, VL, VU, IL, IU, ABSTOL, M, W, Z, LDZ, ISUPPZ, WORK, LWORK, IWORK, LIWORK, INFO )
 CHARACTER JOBZ, RANGE
 INTEGER IL, INFO, IU, LDZ, LIWORK, LWORK, M, N
 REAL ABSTOL, VL, VU
 INTEGER ISUPPZ( * ), IWORK( * )
 REAL D( * ), E( * ), W( * ), WORK( * ), Z( LDZ, * )
PURPOSE
SSTEVR computes selected eigenvalues and, optionally, eigenvectors of a real symmetric tridiagonal matrix T. Eigenvalues and eigenvectors can be selected by specifying either a range of values or a range of indices for the desired eigenvalues.Whenever possible, SSTEVR calls SSTEMR to compute the
eigenspectrum using Relatively Robust Representations. SSTEMR computes eigenvalues by the dqds algorithm, while orthogonal eigenvectors are computed from various "good" L D L^T representations (also known as Relatively Robust Representations). GramSchmidt orthogonalization is avoided as far as possible. More specifically, the various steps of the algorithm are as follows. For the ith unreduced block of T,
(a)
(b)
(c)
(d)
The desired accuracy of the output can be specified by the input parameter ABSTOL.
For more details, see "A new O(n^2) algorithm for the symmetric tridiagonal eigenvalue/eigenvector problem", by Inderjit Dhillon, Computer Science Division Technical Report No. UCB//CSD97971, UC Berkeley, May 1997.
Note 1 : SSTEVR calls SSTEMR when the full spectrum is requested on machines which conform to the ieee754 floating point standard. SSTEVR calls SSTEBZ and SSTEIN on nonieee machines and
when partial spectrum requests are made.
Normal execution of SSTEMR may create NaNs and infinities and hence may abort due to a floating point exception in environments which do not handle NaNs and infinities in the ieee standard default manner.
ARGUMENTS
 JOBZ (input) CHARACTER*1

= aqNaq: Compute eigenvalues only;
= aqVaq: Compute eigenvalues and eigenvectors.  RANGE (input) CHARACTER*1

= aqAaq: all eigenvalues will be found.
= aqVaq: all eigenvalues in the halfopen interval (VL,VU] will be found. = aqIaq: the ILth through IUth eigenvalues will be found.  N (input) INTEGER
 The order of the matrix. N >= 0.
 D (input/output) REAL array, dimension (N)
 On entry, the n diagonal elements of the tridiagonal matrix A. On exit, D may be multiplied by a constant factor chosen to avoid over/underflow in computing the eigenvalues.
 E (input/output) REAL array, dimension (max(1,N1))
 On entry, the (n1) subdiagonal elements of the tridiagonal matrix A in elements 1 to N1 of E. On exit, E may be multiplied by a constant factor chosen to avoid over/underflow in computing the eigenvalues.
 VL (input) REAL
 VU (input) REAL If RANGE=aqVaq, the lower and upper bounds of the interval to be searched for eigenvalues. VL < VU. Not referenced if RANGE = aqAaq or aqIaq.
 IL (input) INTEGER
 IU (input) INTEGER If RANGE=aqIaq, the indices (in ascending order) of the smallest and largest eigenvalues to be returned. 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0. Not referenced if RANGE = aqAaq or aqVaq.
 ABSTOL (input) REAL
 The absolute error tolerance for the eigenvalues. An approximate eigenvalue is accepted as converged when it is determined to lie in an interval [a,b] of width less than or equal to ABSTOL + EPS * max( a,b ) , where EPS is the machine precision. If ABSTOL is less than or equal to zero, then EPS*T will be used in its place, where T is the 1norm of the tridiagonal matrix obtained by reducing A to tridiagonal form. See "Computing Small Singular Values of Bidiagonal Matrices with Guaranteed High Relative Accuracy," by Demmel and Kahan, LAPACK Working Note #3. If high relative accuracy is important, set ABSTOL to SLAMCH( aqSafe minimumaq ). Doing so will guarantee that eigenvalues are computed to high relative accuracy when possible in future releases. The current code does not make any guarantees about high relative accuracy, but future releases will. See J. Barlow and J. Demmel, "Computing Accurate Eigensystems of Scaled Diagonally Dominant Matrices", LAPACK Working Note #7, for a discussion of which matrices define their eigenvalues to high relative accuracy.
 M (output) INTEGER
 The total number of eigenvalues found. 0 <= M <= N. If RANGE = aqAaq, M = N, and if RANGE = aqIaq, M = IUIL+1.
 W (output) REAL array, dimension (N)
 The first M elements contain the selected eigenvalues in ascending order.
 Z (output) REAL array, dimension (LDZ, max(1,M) )
 If JOBZ = aqVaq, then if INFO = 0, the first M columns of Z contain the orthonormal eigenvectors of the matrix A corresponding to the selected eigenvalues, with the ith column of Z holding the eigenvector associated with W(i). Note: the user must ensure that at least max(1,M) columns are supplied in the array Z; if RANGE = aqVaq, the exact value of M is not known in advance and an upper bound must be used.
 LDZ (input) INTEGER
 The leading dimension of the array Z. LDZ >= 1, and if JOBZ = aqVaq, LDZ >= max(1,N).
 ISUPPZ (output) INTEGER array, dimension ( 2*max(1,M) )
 The support of the eigenvectors in Z, i.e., the indices indicating the nonzero elements in Z. The ith eigenvector is nonzero only in elements ISUPPZ( 2*i1 ) through ISUPPZ( 2*i ).
 WORK (workspace/output) REAL array, dimension (MAX(1,LWORK))
 On exit, if INFO = 0, WORK(1) returns the optimal (and minimal) LWORK.
 LWORK (input) INTEGER
 The dimension of the array WORK. LWORK >= 20*N. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal sizes of the WORK and IWORK arrays, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA.
 IWORK (workspace/output) INTEGER array, dimension (MAX(1,LIWORK))
 On exit, if INFO = 0, IWORK(1) returns the optimal (and minimal) LIWORK.
 LIWORK (input) INTEGER
 The dimension of the array IWORK. LIWORK >= 10*N. If LIWORK = 1, then a workspace query is assumed; the routine only calculates the optimal sizes of the WORK and IWORK arrays, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA.
 INFO (output) INTEGER

= 0: successful exit
< 0: if INFO = i, the ith argument had an illegal value
> 0: Internal error
FURTHER DETAILS
Based on contributions byInderjit Dhillon, IBM Almaden, USA
Osni Marques, LBNL/NERSC, USA
Ken Stanley, Computer Science Division, University of
Jason Riedy, Computer Science Division, University of