cpbsvx (l) - Linux Manuals

cpbsvx: uses the Cholesky factorization A = U**H*U or A = L*L**H to compute the solution to a complex system of linear equations A * X = B,

NAME

CPBSVX - uses the Cholesky factorization A = U**H*U or A = L*L**H to compute the solution to a complex system of linear equations A * X = B,

SYNOPSIS

SUBROUTINE CPBSVX(
FACT, UPLO, N, KD, NRHS, AB, LDAB, AFB, LDAFB, EQUED, S, B, LDB, X, LDX, RCOND, FERR, BERR, WORK, RWORK, INFO )

    
CHARACTER EQUED, FACT, UPLO

    
INTEGER INFO, KD, LDAB, LDAFB, LDB, LDX, N, NRHS

    
REAL RCOND

    
REAL BERR( * ), FERR( * ), RWORK( * ), S( * )

    
COMPLEX AB( LDAB, * ), AFB( LDAFB, * ), B( LDB, * ), WORK( * ), X( LDX, * )

PURPOSE

CPBSVX uses the Cholesky factorization A = U**H*U or A = L*L**H to compute the solution to a complex system of linear equations
B, where A is an N-by-N Hermitian positive definite band matrix and X and B are N-by-NRHS matrices.
Error bounds on the solution and a condition estimate are also provided.

DESCRIPTION

The following steps are performed:
1. If FACT = aqEaq, real scaling factors are computed to equilibrate
the system:

diag(S) diag(S) inv(diag(S)) diag(S) B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A is
overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
2. If FACT = aqNaq or aqEaq, the Cholesky decomposition is used to
factor the matrix A (after equilibration if FACT aqEaq) as
U**H U,  if UPLO aqUaq, or

L**H,  if UPLO aqLaq,

where U is an upper triangular band matrix, and L is a lower
triangular band matrix.
3. If the leading i-by-i principal minor is not positive definite,
then the routine returns with INFO i. Otherwise, the factored
form of A is used to estimate the condition number of the matrix
A.  If the reciprocal of the condition number is less than machine
precision, INFO N+1 is returned as a warning, but the routine
still goes on to solve for X and compute error bounds as
described below.
4. The system of equations is solved for X using the factored form
of A.
5. Iterative refinement is applied to improve the computed solution
matrix and calculate error bounds and backward error estimates
for it.
6. If equilibration was used, the matrix X is premultiplied by
diag(S) so that it solves the original system before

equilibration.

ARGUMENTS

FACT (input) CHARACTER*1
Specifies whether or not the factored form of the matrix A is supplied on entry, and if not, whether the matrix A should be equilibrated before it is factored. = aqFaq: On entry, AFB contains the factored form of A. If EQUED = aqYaq, the matrix A has been equilibrated with scaling factors given by S. AB and AFB will not be modified. = aqNaq: The matrix A will be copied to AFB and factored.
= aqEaq: The matrix A will be equilibrated if necessary, then copied to AFB and factored.
UPLO (input) CHARACTER*1
= aqUaq: Upper triangle of A is stored;
= aqLaq: Lower triangle of A is stored.
N (input) INTEGER
The number of linear equations, i.e., the order of the matrix A. N >= 0.
KD (input) INTEGER
The number of superdiagonals of the matrix A if UPLO = aqUaq, or the number of subdiagonals if UPLO = aqLaq. KD >= 0.
NRHS (input) INTEGER
The number of right-hand sides, i.e., the number of columns of the matrices B and X. NRHS >= 0.
AB (input/output) COMPLEX array, dimension (LDAB,N)
On entry, the upper or lower triangle of the Hermitian band matrix A, stored in the first KD+1 rows of the array, except if FACT = aqFaq and EQUED = aqYaq, then A must contain the equilibrated matrix diag(S)*A*diag(S). The j-th column of A is stored in the j-th column of the array AB as follows: if UPLO = aqUaq, AB(KD+1+i-j,j) = A(i,j) for max(1,j-KD)<=i<=j; if UPLO = aqLaq, AB(1+i-j,j) = A(i,j) for j<=i<=min(N,j+KD). See below for further details. On exit, if FACT = aqEaq and EQUED = aqYaq, A is overwritten by diag(S)*A*diag(S).
LDAB (input) INTEGER
The leading dimension of the array A. LDAB >= KD+1.
AFB (input or output) COMPLEX array, dimension (LDAFB,N)
If FACT = aqFaq, then AFB is an input argument and on entry contains the triangular factor U or L from the Cholesky factorization A = U**H*U or A = L*L**H of the band matrix A, in the same storage format as A (see AB). If EQUED = aqYaq, then AFB is the factored form of the equilibrated matrix A. If FACT = aqNaq, then AFB is an output argument and on exit returns the triangular factor U or L from the Cholesky factorization A = U**H*U or A = L*L**H. If FACT = aqEaq, then AFB is an output argument and on exit returns the triangular factor U or L from the Cholesky factorization A = U**H*U or A = L*L**H of the equilibrated matrix A (see the description of A for the form of the equilibrated matrix).
LDAFB (input) INTEGER
The leading dimension of the array AFB. LDAFB >= KD+1.
EQUED (input or output) CHARACTER*1
Specifies the form of equilibration that was done. = aqNaq: No equilibration (always true if FACT = aqNaq).
= aqYaq: Equilibration was done, i.e., A has been replaced by diag(S) * A * diag(S). EQUED is an input argument if FACT = aqFaq; otherwise, it is an output argument.
S (input or output) REAL array, dimension (N)
The scale factors for A; not accessed if EQUED = aqNaq. S is an input argument if FACT = aqFaq; otherwise, S is an output argument. If FACT = aqFaq and EQUED = aqYaq, each element of S must be positive.
B (input/output) COMPLEX array, dimension (LDB,NRHS)
On entry, the N-by-NRHS right hand side matrix B. On exit, if EQUED = aqNaq, B is not modified; if EQUED = aqYaq, B is overwritten by diag(S) * B.
LDB (input) INTEGER
The leading dimension of the array B. LDB >= max(1,N).
X (output) COMPLEX array, dimension (LDX,NRHS)
If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to the original system of equations. Note that if EQUED = aqYaq, A and B are modified on exit, and the solution to the equilibrated system is inv(diag(S))*X.
LDX (input) INTEGER
The leading dimension of the array X. LDX >= max(1,N).
RCOND (output) REAL
The estimate of the reciprocal condition number of the matrix A after equilibration (if done). If RCOND is less than the machine precision (in particular, if RCOND = 0), the matrix is singular to working precision. This condition is indicated by a return code of INFO > 0.
FERR (output) REAL array, dimension (NRHS)
The estimated forward error bound for each solution vector X(j) (the j-th column of the solution matrix X). If XTRUE is the true solution corresponding to X(j), FERR(j) is an estimated upper bound for the magnitude of the largest element in (X(j) - XTRUE) divided by the magnitude of the largest element in X(j). The estimate is as reliable as the estimate for RCOND, and is almost always a slight overestimate of the true error.
BERR (output) REAL array, dimension (NRHS)
The componentwise relative backward error of each solution vector X(j) (i.e., the smallest relative change in any element of A or B that makes X(j) an exact solution).
WORK (workspace) COMPLEX array, dimension (2*N)
RWORK (workspace) REAL array, dimension (N)
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, and i is
<= N: the leading minor of order i of A is not positive definite, so the factorization could not be completed, and the solution has not been computed. RCOND = 0 is returned. = N+1: U is nonsingular, but RCOND is less than machine precision, meaning that the matrix is singular to working precision. Nevertheless, the solution and error bounds are computed because there are a number of situations where the computed solution can be more accurate than the value of RCOND would suggest.

FURTHER DETAILS

The band storage scheme is illustrated by the following example, when N = 6, KD = 2, and UPLO = aqUaq:
Two-dimensional storage of the Hermitian matrix A:

a11  a12  a13

  a22  a23  a24

       a33  a34  a35

            a44  a45  a46

                 a55  a56

(aij=conjg(aji))         a66
Band storage of the upper triangle of A:

      a13  a24  a35  a46

   a12  a23  a34  a45  a56

a11  a22  a33  a44  a55  a66
Similarly, if UPLO = aqLaq the format of A is as follows:

a11  a22  a33  a44  a55  a66

a21  a32  a43  a54  a65   *

a31  a42  a53  a64      *
Array elements marked * are not used by the routine.