install-mh – initialize the nmh environment Synopsis /usr/libexec/nmh/install-mh [-auto] [-check] [-version] [-help]DescriptionInstall-mh is the nmh program to create the initial setup for a first-time nmh user. Install-mh lives in two places for historical reasons. The -auto option does things as automatically as possible and makes install-mh less chatty. The user is asked for the name…
install-info – update info/dir entries Synopsisinstall-info [,OPTION/]… [,INFO-FILE /[,DIR-FILE/]] DescriptionAdd or remove entries in INFO-FILE from the Info directory DIR-FILE. INFO-FILE and DIR-FILE are required unless the –info-file or –dir-file (or –info-dir) options are given, respectively. Options–add-once add only to first matching section, not all. –align=,COL/ start description of new entries at column COL. –calign=,COL/…
inspect – Boost code inspection tool Synopsisinspect [-cvs] [-text] [-brief] [options…] DescriptionIt is not uncommon for various common errors or guideline violations to creep into the Boost libraries. The inspect program detects and reports several common problems. It can be used to scan a proposed Boost submission to identify various failures. The program is run…
insight – GDB/Insight graphical debugger DescriptionThis is the GNU debugger. Usage: insight [options] [executable-file [core-file or process-id]] insight [options] –args executable-file [inferior-arguments …]Options–args Arguments after executable-file are passed to inferior -b BAUDRATE Set serial port baud rate used for remote debugging. –batch Exit after processing options. –batch-silent As for –batch, but suppress all insight stdout…
inputattach – attach a serial line to an input-layer device Synopsisinputattach [–daemon] [–always] [–noinit] [–baud baud>] <mode> <device> Descriptioninputattach attaches a serial line to an input-layer device via a line discipline. At least one of the available modes must be specified on the command line; if the modes can be probed, up to four can…
inotifywatch – gather filesystem access statistics using inotify Synopsisinotifywatch [-hvzrqf] [-e <event> ] [-t <seconds> ] [-a <event> ] [-d <event> ] <file> [ … ] Descriptioninotifywatch listens for filesystem events using Linux’s inotify(7) interface, then outputs a summary count of the events received on each file or directory. Outputinotifywatch will output a table on…
inotifywait – wait for changes to files using inotify Synopsisinotifywait [-hcmrq] [-e <event> ] [-t <seconds> ] [–format <fmt> ] [–timefmt <fmt> ] <file> [ … ] Descriptioninotifywait efficiently waits for changes to files using Linux’s inotify(7) interface. It is suitable for waiting for changes to files from shell scripts. It can either exit once…
inotail – A fast and lightweight version of tail using inotify Synopsisinotail [OPTION]… [FILE]… Descriptioninotail is a replacement for the ‘tail’ program found in the base installation of every Linux/UNIX system. It makes use of the inotify infrastructure in recent versions of the Linux kernel to speed up tailing files in the follow mode (the…
innotop – MySQL and InnoDB transaction/status monitor. SynopsisTo monitor servers normally: innotopTo monitor InnoDB status information from a file: innotop /var/log/mysql/mysqld.errTo run innotop non-interactively in a pipe-and-filter configuration: innotop –count 5 -d 1 -nTo monitor a database on another system using a particular username and password: innotop -u <username> -p <password> -h <hostname>Descriptioninnotop monitors MySQL…
innochecksum – offline InnoDB file checksum utility Synopsis innochecksum [options] file_nameDescriptioninnochecksum prints checksums for InnoDB files. This tool reads an InnoDB tablespace file, calculates the checksum for each page, compares the calculated checksum to the stored checksum, and reports mismatches, which indicate damaged pages. It was originally developed to speed up verifying the integrity of…
innmail – Simple mail-sending program Synopsisinnmail [-h] [-s subject] address [address …] Descriptioninnmail is a Perl script intended to provide the non-interactive mail-sending functionality of mail(1) while avoiding nasty security problems. It takes the body of a mail message on standard input and sends it to the specified addresses by invoking the value of mta…
innfeed – multi-host, multi-connection, streaming NNTP feeder. Synopsisinnfeed [ -a spool-dir ] [ -b directory ] [ -C ] [ -c filename ] [ -d num ] [ -e bytes ] [ -h ] [ -l filename ] [ -m ] [ -M ] [ -o bytes ] [ -p file ] [ -S file…
innconfval – Get configuration parameters from inn.conf Synopsisinnconfval [-pstv] [-i file] [parameter …] innconfval -C [-i file] Descriptioninnconfval normally prints the values of the parameters specified on the command line. By default, it just prints the parameter values, but if -p, -s, or -t are given, it instead prints the parameter and value in the…
inline2test – The Test::Inline 2 Test Compiler Synopis > inline2test ./inline2test.conf # In your inline2test.conf input=lib output=t execute=0 verbose=1 readonly=1 header=inline2text.txtDescription"inline2test" is the Test::Inline 2 test compiler. It’s job is to scan through an arbitrary tree of Perl source code files, locate inline test sections, extract them, convert them to test scripts, and write them…
inb, outb, inw, outw, inl, outl – access I/O ports Synopsis inb ADDRESS inw ADDRESS inl ADDRESS outb ADDRESS DATA outw ADDRESS DATA outl ADDRESS DATAExamples inb 0x278 outw 0x440 0xffffDescriptionThese commands enable command line and script access directly to I/O ports on PC hardware. The "inb", "inw" and "inl" commands perform an input (read)…
Inkview – an SVG viewer and slideshow program. Synopsis"inkview [options] [filename …]" options: -h, –help -V, –version -f, –fullscreen -r, –recursive -t, –timer=NUMBER -s, –scale=NUMBER -p, –preloadDescriptionInkview is an Scalable Vector Graphics (SVG) viewer that can also be used for slideshows or presentations. One or more FILES or FOLDERS can be specified on the command-line…
名稱Inkscape – SVG (Scalable Vector Graphics) 編輯程式。 概要"inkscape [選項] [檔名 …]" 選項: -?, –help –usage -V, –version -f, –file=檔名 -e, –export-png=檔名 -a, –export-area=x0:y0:x1:y1 -C, –export-area-page -D, –export-area-drawing –export-area-snap -i, –export-id=ID -j, –export-id-only -t, –export-use-hints -b, –export-background=顏色 -y, –export-background-opacity=數值 -d, –export-dpi=DPI -w, –export-width=寬度 -h, –export-height=高度 -P, –export-ps=FILENAME -E, –export-eps=FILENAME -A, –export-pdf=FILENAME –export-pdf-version=VERSION-STRING –export-latex –export-ps-level {2,3} -T,…
Inkscape – editor SVG (Scalable Vector Graphics). Synopsis"inkscape [voľby] [názov súboru …]" voľby: -?, –help –usage -V, –version -f, –file=NÁZOVSÚBORU -e, –export-png=NÁZOVSÚBORU -a, –export-area=x0:y0:x1:y1 -C, –export-area-canvas -D, –export-area-drawing –export-area-snap -i, –export-id=ID -j, –export-id-only -t, –export-use-hints -b, –export-background=FARBA -y, –export-background-opacity=HODNOTA -d, –export-dpi=DPI -w, –export-width=ŠÍRKA -h, –export-height=VÝŠKA -P, –export-ps=NÁZOVSÚBORU -E, –export-eps=NÁZOVSÚBORU -A, –export-pdf=NÁZOVSÚBORU -T, –export-text-to-path –export-bbox-page -l,…
Inkscape – an SVG (Scalable Vector Graphics) editing program. Synopsis"inkscape [options] [filename_1 filename_2 …]" options: -?, –help -V, –version –debug-info –system-data-directory –user-data-directory -p, –pipe –pdf-page=PAGE –pdf-poppler –convert-dpi-method=METHOD –no-convert-text-baseline-spacing -o, –export-filename=FILENAME –export-overwrite –export-type=TYPE[,TYPE]* –export-extension=EXTENSION-ID -C, –export-area-page -D, –export-area-drawing -a, –export-area=x0:y0:x1:y1 –export-area-snap -d, –export-dpi=DPI -w, –export-width=WIDTH -h, –export-height=HEIGHT –export-margin=MARGIN -i, –export-id=OBJECT-ID[;OBJECT-ID]* -j, –export-id-only -l, –export-plain-svg –export-ps-level=LEVEL –export-pdf-version=VERSION…
名前Inkscape – SVG (Scalable Vector Graphics) 編集プログラム 書式"inkscape [options] [filename …]" options: -?, –help –usage -V, –version -f, –file=FILENAME -e, –export-png=FILENAME -a, –export-area=x0:y0:x1:y1 -C, –export-area-page -D, –export-area-drawing –export-area-snap -i, –export-id=ID -j, –export-id-only -t, –export-use-hints -b, –export-background=COLOR -y, –export-background-opacity=VALUE -d, –export-dpi=DPI -w, –export-width=WIDTH -h, –export-height=HEIGHT -P, –export-ps=FILENAME -E, –export-eps=FILENAME -A, –export-pdf=FILENAME –export-pdf-version=VERSION-STRING –export-latex –export-ps-level {2,3} -T,…