apcupsd_cgi_script_selinux – Security Enhanced Linux Policy for the apcupsd_cgi_script processes Description Security-Enhanced Linux secures the apcupsd_cgi_script processes via flexible mandatory access control. The apcupsd_cgi_script processes execute with the apcupsd_cgi_script_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
apcupsd – a daemon for controlling most APC UPSes Synopsis [-b ] [-d level | –-debug level ] [-f file | –-config-file file ] [-P file | –-pid-file file ] [-p | -kill-on-powerfail | t | -term-on-powerfail ] [-R ] [-k | -killpower | -hibernate | o | -power-off ] [-h | -help ] [-V…
apcupsd-ups – Driver for apcupsd client access Note This man page only documents the specific features of the apcupsd-ups driver. For information about the core driver, see nutupsdrv(8). Description This driver is a client to apcupsd. apcupsd-ups acts as an apcupsd client, simply forwarding data. This can be useful in cases where both protocols are…
apctest – apcupsd(8) test program Synopsis Description is a program that enables the running of certain low-level tests to check the operation of the attached simple signalling American Power Conversion Corp (APC) UPS and to check that your apcupsd(8) configuration is correctly setup and can establish communication with the UPS. For an APC UPS operating…
apcsmart – Driver for American Power Conversion Smart Protocol UPS equipment Synopsis apcsmart -h apcsmart -a ‘UPS_NAME’ [-x option=value …] Note This man page only documents the hardware-specific features of the apcsmart driver. For information about the core driver, see nutupsdrv(8). Supported Hardware The apcsmart driver should recognize (or at the very least work with)…
apcsmart-old – Driver for American Power Conversion Smart Protocol UPS equipment Synopsis apcsmart-old -h apcsmart-old -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the apcsmart-old driver. For information about the core driver, see nutupsdrv(8). Supported Hardware apcsmart-old should recognize all recent APC models that use a serial protocol at 2400…
apccontrol – apcupsd(8) event handler script Synopsis { <event> <ups-name> <connected> <powered> } Description When apcupsd(8) detects anomalies from the UPS being monitored, it triggers an event which usually results in one or more calls to the shell script. Each event causes to take a particular action. These actions default to sane behaviour for all…
apcaccess – retrieve status information from apcupsd(8) Synopsis [-f <config-file>] [-h <host>[:<port>]] [-p <parameter-name>] [-u] [<command>] [<host>[:<port>]] Description is a program which prints out the complete status of most American Power Conversion Corp. (APC) UPSes provided you have the apcupsd(8) daemon installed, properly configured and running. It can access status information from any APC UPS…
apache2ctl – Apache HTTP server control interface Synopsis When acting in SysV init mode, apache2ctl takes simple, one-word commands, defined below. apachectl command apache2ctl command When acting in pass-through mode, apache2ctl can take all the arguments available for the httpd binary. apachectl [httpd-argument] apache2ctl [httpd-argument] Description apache2ctl is a front end to the Apache HyperText…
httpd_selinux – Security Enhanced Linux Policy for the httpd processes Description Security-Enhanced Linux secures the httpd processes via flexible mandatory access control. The httpd processes execute with the httpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
apache2ctl – Apache HTTP server control interface Synopsis When acting in SysV init mode, apache2ctl takes simple, one-word commands, defined below. apachectl command apache2ctl command When acting in pass-through mode, apache2ctl can take all the arguments available for the httpd binary. apachectl [httpd-argument] apache2ctl [httpd-argument] Description apache2ctl is a front end to the Apache HyperText…
apache2 – Apache Hypertext Transfer Protocol Server Synopsis apache2 [ –d serverroot ] [ –f config ] [ –C directive ] [ –c directive ] [ –D parameter ] [ –e level ] [ –E file ] [ -k start|restart|graceful|stop|graceful-stop ] [ –R directory ] [ –h ] [ –l ] [ –L ] […
ap – parse addresses RFC 822-style Synopsis /usr/libexec/nmh/ap [-form formatfile] [-format string] [-width columns] [-version] [-help] addrs … Description Ap is a program that parses addresses according to the ARPA Internet standard. It also understands many non-standard formats. It is useful for seeing how nmh will interpret an address. The ap program treats each argument…
aoeping – simple communication with AoE device Synopsis aoeping [options] {shelf} {slot} {netif} Description The aoeping(8) program performs simple one or two-round-trip communication with an ATA over Ethernet (AoE) device. Running aoeping(8) without command line arguments will result in a short usage summary being displayed. The aoeping(8) program will wait forever if if doesn’t receive…
aoecfg – manipulate AoE configuration strings Synopsis aoecfg [-c cmd] [-s cfgstr] [-t timeout] [shelf slot] [netif] Description Aoecfg(8) sends AoE configuration commands that control the retrivial, conditional or unconditional setting of AoE configuration strings. Since configuration happens before the MAC address of the target is known, the packet is broadcast. AoE targets with a…
aoe-version – print AoE-related software version information Synopsis aoe-version Description The aoe-version script collects information on running and installed ATA over Ethernet software, displaying a summary. Example ellijay:~# aoe-version aoetools: 17 installed aoe driver: 50 running aoe driver: 50 See Also aoe-discover(8), aoe-interfaces(8), aoetools(8), aoe-stat(8). Author Ed L. Cashin (ecashin [at] coraid.com)
aoe-stat – print aoe device status report Synopsis modprobe aoe aoe-stat env sysfs_dir=/sys aoe-stat Description The aoe-stat script collects information on ATA over Ethernet devices from sysfs. For each AoE device the kernel has discovered, there is one row in the script’s output. Each row has the following columns. devicename The device name is of…
aoe-revalidate – revalidate the disk size of an aoe device Synopsis aoe-revalidate e{major}.{minor} Description The aoe-revalidate command tells the aoe driver to revalidate the disk size of an open aoe device. Normally the aoe driver will only acknowledge changes in an aoe device’s disk size when the aoe device is not open. It should be…
aoe-mkshelf – create special device files for one shelf address Synopsis aoe-mkshelf {device-dir} {shelf-address} env n_partitions=1 aoe-mkshelf {device-dir} {shelf-address} Description The aoe-mkshelf command is not needed on systems that have udev installed and is incompatible with aoe drivers that have the aoe_dyndevs module parameter set to 1. Systems lacking udev and having an aoe driver…
aoe-mkdevs – create special device files for aoe driver Synopsis aoe-mkdevs {device-dir} env n_partitions=1 aoe-mkdevs {device-dir} Description The aoe-mkdevs command is deprecated in favor of udev. Systems with udev do not need to use the aoe-mkdevs or aoe-mkself commands, because udev will create device nodes as needed. Systems without udev use aoe-mkdevs to create the…