aoe-interfaces – restrict aoe driver to specified network interfaces Synopsis aoe-interfaces [dev1] [dev2 …] aoe-interfaces -c Description The aoe-interfaces command tells the aoe driver to ignore ATA over Ethernet (AoE) traffic on all but the specified network interfaces. It is analogous to the aoe_iflist module load option. If neither the aoe_iflist module load option nor…
aoe-flush – flush the down devices out of the aoe driver Synopsis aoe-flush [-a] aoe-flush dev1 [dev2 …] Description The aoe-flush command tells the aoe driver to remove devices from the system and forget about them. Normally the aoe driver will remember all devices it has seen until the module is unloaded. By default, aoe-flush…
aoe-discover – tell aoe driver to discover AoE devices Synopsis aoe-discover Description The aoe-discover command tells the aoe driver to discover ATA over Ethernet (AoE) devices on the network. All network interfaces will be probed with a AoE config query broadcast. If the aoe-interfaces command has limited the allowable network interfaces, only devices discovered via…
anvil – Postfix session count and request rate control Synopsis anvil [generic Postfix daemon options] Description The Postfix anvil(8) server maintains statistics about client connection counts or client request rates. This information can be used to defend against clients that hammer a server with either too many simultaneous sessions, or with too many successive requests…
antivirus_selinux – Security Enhanced Linux Policy for the antivirus processes Description Security-Enhanced Linux secures the antivirus processes via flexible mandatory access control. The antivirus processes execute with the antivirus_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
anon_sftpd_selinux – Security Enhanced Linux Policy for the anon_sftpd processes Description Security-Enhanced Linux secures the anon_sftpd processes via flexible mandatory access control. The anon_sftpd processes execute with the anon_sftpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
and – auto nice daemon Synopsis and [-htvsx] [-i interval] [-c /path/to/and.conf] [-d /path/to/and.priorities] Version This manual page documents and version 1.2.2. Description The auto nice daemon activates itself in certain intervals and renices and even kills jobs according to their priority and CPU usage. Renice levels and kill signals can be defined in terms…
anacron – runs commands periodically Synopsis anacron [-s] [-f] [-n] [-d] [-q] [-t anacrontab] [-S spooldir] [job] … anacron [-S spooldir] -u [-t anacrontab] [job] … anacron [-V|-h] anacron -T [-t anacrontab] Description Anacron can be used to execute commands periodically, with a frequency specified in days. Unlike cron(8), it does not assume that the…
anaconda_selinux – Security Enhanced Linux Policy for the anaconda processes Description Security-Enhanced Linux secures the anaconda processes via flexible mandatory access control. The anaconda processes execute with the anaconda_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
amzfs-snapshot – Amanda script to create zfs snapshot Description amzfs-snapshot is an Amanda script implementing the Script API. It should not be run by users directly. It create a zfs snapshot of the filesystem where the path specified is mounted. PRE-DLE-* create a snapshot and the POST-DLE-* destroy the snapshot, *-DLE-AMCHECK, *-DLE-ESTIMATE and *-DLE-BACKUP must…
amzfs-sendrecv – Amanda script to create zfs sendrecv Description amzfs-sendrecv is an Amanda application implementing the Application API. It should not be run by users directly. It create a zfs snapshot of the filesystem and backup the snapshot with ‘zfs send’. Snapshot are kept after the backup is done, this increase the disk space use…
amverify – check an Amanda tape for errors Synopsis amverify config [slot [runtapes]] Description Amverify reads an Amanda format tape and makes sure each backup image can be processed by amrestore and, if possible, the appropriate restore program (e.g. tar). Amverify runs amrestore on each file of the tape and pipes the output to a restore…
amvault – Copy Amanda dumps from one volume to another Synopsis amvault [-o configoption…] [–dry-run | -n] [–quiet | -q] [–fulls-only] [–exact-match] [–export] [–src-timestamp src-timestamp] –label-template label-template –dst-changer dst-changer [–autolabel autolabel-arg…] config [hostname [ disk [ date [ level [ hostname […] ] ] ] ]] Warning This application is not yet in its final form, and is subject to major revision in subsequent versions of Amanda. Backward compatibility is not guaranteed. Note…
amtu_selinux – Security Enhanced Linux Policy for the amtu processes Description Security-Enhanced Linux secures the amtu processes via flexible mandatory access control. The amtu processes execute with the amtu_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
amtu – Abstract Machine Test Utility (AMTU) Synopsis amtu [-dmsinph] Description Abstract Machine Test Utility (AMTU) is an administrative utility that checks whether the underlying protection mechanisms of the hardware are being enforced. These checks are a requirement of the Controlled Access Protection Profile (CAPP) FPT_AMT.1 (see http://www.radium.ncsc.mil/tpep/library/protection_profiles/CAPP-1.d.pdf). AMTU executes the following tests: * Memory…
amtoc – generate TOC (Table Of Contents) for an Amanda run Synopsis amtoc [-a] [-i] [-t] [-f file] [-s subs] [-w] [–] logfile Description Amtoc generates a table of contents for an Amanda run. It’s a perl script (if you don’t have perl, install it first!). Options -a The output file name will be label-of-the-tape.toc in the…
amtapetype – generate a tapetype definition by testing the device directly Synopsis amtapetype [-h] [-c] [-f] [-p] [-b blocksize] [-t typename] [-l label] [-o configoption…] [config] [device] Description amtapetype generates a tapetype entry for Amanda by testing the device directly. Options Note The options for amtapetype have changed in version 2.6.1 -h Display the help message. -c Run only…
amtape – Control Amanda changers Synopsis amtape [-o configoption…] config subcommand [subcommand_options…] Description Amtape is the command-line interface to Amanda’s tape changers (amanda-changers(7)) and to the taperscan algorithm (amanda-taperscan(7)). Tape changers maintain a notion of the current slot for each configuration. This may or may not correspond to an actual physical state of the device, but…
amsuntar – Amanda Application to interface with native tar utility available on solaris platforms Description Amsuntar is an Amanda Application API script. It should not be run by users directly. It uses Solaris bundled tar utility to backup and restore data. Currenty ACLs from ZFS file system can only be backed up using the solaris…
amstatus – display the state of an Amanda run Synopsis amstatus [–file amdumpfile] [–summary] [–dumping] [–waitdumping] [–waittaper] [–dumpingtape] [–writingtape] [–finished] [–failed] [–estimate] [–gestimate] [–stats] [–locale-independent-date-format] [–config] config Description Amstatus gives the current state of the Amanda run specified by the config configuration. If there is no active Amanda running, it summarizes the result of the last…