Section 1: user commands and tools
NAME hpftodit – create font description files for use with groff -Tlj4 SYNOPSIS [ -aqs ] [ -i n ] tfm-file map-file output-font -d tfm-file [map-file] –help -v –version DESCRIPTION hpftodit creates a font file for use with a Hewlett-Packard LaserJet~4-series (or newer) printer with groff -Tlj4, using data from an HP tagged font metric…
NAME hpfsck — check integrity of an HFS+ volume SYNOPSIS hpfsck [-v] source-path Description hpfsck checks the integrity of an HFS+ volume. With the -v option, the data contained in the volume header is output as well. See also hfsplus(7), hpmount(1), hpls(1), hpcd(1), hprm(1), hpmkdir(1), hppwd(1), hpcopy(1), hpumount(1). Author This manual page was…
NAME hpcopy — copy files from an HFS+ volume SYNOPSIS hpcopy [-m | -b | -t | -r | -a ] source-path … target-path Description hpcopy copies files and directories from an HFS+ volume. If multiple files are to be copied, the target path must be a directory. Since Macintosh files contain two forks,…
NAME hpcd — change directory on an HFS+ volume SYNOPSIS hpcd hfs-path Description hpcd changes the current working directory on the previously mounted HFS+ volume. Subsequent commands will interpret filenames relative to this directory. See also hfsplus(7), hpmount(1), hpls(1), hppwd(1), hprm(1), hpmkdir(1), hpcopy(1), hpumount(1), hpfsck(1). Author This manual page was written by Jens…
NAME hp2ps – convert a heap profile to a POSTSCRIPT graph SYNOPSIS hp2ps [flags] [file][.hp] DESCRIPTION The program hp2ps converts a heap profile stored in file into a POSTSCRIPT graph, sending the result to file.ps. By convention, files to be processed by hp2ps have a .hp extension. However, for compatibility with older versions of hp2ps,…
NAME hp-wificonfig – Wifi Configuration Utility DESCRIPTION Wifi/Wireless/802.11 configuration utility for HPLIP supported printers. (Note: Only select wireless capable printers are supported by this utility). SYNOPSIS hp-wificonfig [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none,…
NAME hp-unload – Photo Card Access Utility DESCRIPTION Access inserted photo cards on supported HPLIP printers. This provides an alternative for older devices that do not support USB mass storage or for access to photo cards over a network. SYNOPSIS hp-unload [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a…
NAME hp-toolbox – HP Device Manager DESCRIPTION The HP Device Manager (aka "Toolbox") for HPLIP supported devices. Provides access to status, tools, and supplies levels. SYNOPSIS hp-toolbox [OPTIONS] OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information:…
NAME hp-timedate – Time/Date Utility DESCRIPTION Set the time and date on an HP Officejet all-in-one device using the PC time and date. SYNOPSIS hp-timedate [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the…
NAME hp-testpage – Testpage Print Utility DESCRIPTION Print a tespage to a printer. Prints a summary of device information and shows the printer’s margins. SYNOPSIS hp-testpage [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set…
NAME hp-systray – System Tray Status Service DESCRIPTION System Tray monitors the HP device status and Displays SYNOPSIS hp-systray [OPTIONS] OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information: -h or –help Startup even if no hplip…
NAME hp-setup – Printer/Fax Setup Utility DESCRIPTION Installs HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of a testpage. Performs basic fax parameter setup. SYNOPSIS hp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE] MODE Run in graphical UI mode: -u or –gui (Default) Run…
NAME hp-sendfax – PC Sendfax Utility DESCRIPTION PC send fax for HPLIP supported multifunction printers. SYNOPSIS hp-sendfax [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in non-interactive mode: -n or –non-interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*,…
NAME hp-scan – Scan Utility DESCRIPTION SANE-based scan utility for HPLIP supported all-in-one/mfp devices. SYNOPSIS hp-scan [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error,…
NAME hp-query – Model Query Utility DESCRIPTION Query a printer model for static model information. Designed to be called from other processes. SYNOPSIS hp-query [MODE] [OPTIONS] MODE Run in non-interactive mode: -n or –non-interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same…
NAME hp-probe – Printer Discovery Utility DESCRIPTION Discover HPLIP supported USB, parallel, and network attached printers. SYNOPSIS hp-probe [OPTIONS] OPTIONS Bus to probe: -b<bus> or –bus=<bus> <bus>: cups, usb*, net, bt, fw, par (*default) (Note: bt and fw not supported in this release.) Set Time to Live (TTL): -t<ttl> or –ttl=<ttl> (Default is 4). Set…
NAME hp-printsettings – Printer Settings Utility DESCRIPTION Printer settings (options) utility for HPLIP supported printers. SYNOPSIS hp-printsettings [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g…
NAME hp-print – Print Utility DESCRIPTION A simple print UI front-end to lp/lpr. SYNOPSIS hp-print [DEVICE_URI|PRINTER_NAME] [OPTIONS] [FILES] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same…
NAME hp-pqdiag – Print Quality Diagnostic Utility DESCRIPTION Print quality diagnostic utility for HPLIP supported inkjet printers. (Note: Most printers do not require the use of this utility). SYNOPSIS hp-pqdiag [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or…
NAME hp-plugin – Plugin Download and Install Utility DESCRIPTION HP Proprietary Plugin Download and Install Utility SYNOPSIS hp-plugin [MODE] [OPTIONS] MODE Run in graphical UI mode: -u or –gui (Default) Run in interactive mode: -i or –interactive Installation for required printer mode: –required (Qt4 only) Installation for optional printer mode: –optional (Qt4 only) Set the…