Section 1: user commands and tools
NAME hp-pkservice – Policy Kit Service DESCRIPTION Policy Kit Service SYNOPSIS hp-pkservice [MODE] [OPTIONS] MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information: -h or –help OPTIONS (GENERAL) PolicyKit…
NAME hp-makeuri – Device URI Creation Utility DESCRIPTION Creates device URIs for local and network connected printers for use with CUPS. SYNOPSIS hp-makeuri [OPTIONS] [SERIAL NO.|USB ID|IP|DEVNODE] SERIAL NO.|USB ID|IP|DEVNODE USB IDs (usb only): "xxx:yyy" where xxx is the USB bus ID and yyy is the USB device ID. The ‘:’ and all leading zeroes…
NAME hp-makecopies – Make Copies Utility DESCRIPTION PC initiated make copies function on supported HP AiO and MFP devices. (Note: Currently unsupported in Qt4.) SYNOPSIS hp-makecopies [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in non-interactive mode: -n or –non-interactive OPTIONS Set…
NAME hp-logcapture – HPLIP logs capture Utility DESCRIPTION Captures the HPLIP log files. SYNOPSIS [su -c /sudo] hp-logcapture [USER INFO] [OPTIONS] SYNOPSIS e.g. su -c ‘hp-logcapture’ USER INFO User name for which logs to be collected: –user=<username> OPTIONS This help information: -h or –help Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error,…
NAME hp-linefeedcal – Printer Line Feed Calibration Utility DESCRIPTION Line feed calibration utility for HPLIP supported inkjet printers. (Note: Most printers do not require the use of this utility). SYNOPSIS hp-linefeedcal [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level>…
NAME hp-levels – Supply Levels Utility DESCRIPTION Display bar graphs of current supply levels for supported HPLIP printers. SYNOPSIS hp-levels [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level>…
NAME hp-info – Device Information Utility DESCRIPTION Query a printer for static model information, dynamic status information, and CUPS printer queue settings. SYNOPSIS hp-info [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging…
NAME hp-firmware – Firmware Download Utility DESCRIPTION Download firmware to a device that requires downloaded firmware to function. (Note: Most printers do not require the use of this utility). SYNOPSIS hp-firmware [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode:…
NAME hp-faxsetup – Fax Device Setup Utility DESCRIPTION Fax device setup utility for HPLIP supported printers. SYNOPSIS hp-faxsetup [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode:…
NAME hp-fab – Fax Address Book DESCRIPTION A simple fax address book for HPLIP. SYNOPSIS hp-fab [MODE] [OPTIONS] MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in debug mode: -g (same as option: -ldebug) This help information: -h or…
NAME hp-doctor – Self Diagnse Utility and Healing Utility DESCRIPTION Tool checks for the deprecated, plug-in, dependencies, queues, permission issues and provides self diagnose steps SYNOPSIS hp-doctor [OPTIONS] MODE Run in interactive mode: -i or –interactive (Default) OPTIONS This help information: -h or –help Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error,…
NAME hp-devicesettings – Device Setup Utility DESCRIPTION Device settings utility for HPLIP supported printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-devicesettings [DEVICE_URI|PRINTER_NAME] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*,…
NAME hp-config_usb_printer – HP device config using USB DESCRIPTION Udev invokes this tool. Tool detects the plugin, Smart Install (C/DVD-ROM) issues and notifies to logged-in user. Tool also downloads firmware to the device. SYNOPSIS hp-config_usb_printer [OPTIONS] [USB bus:device] OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none, info*, error, warn, debug (*default) Run in…
NAME hp-colorcal – Printer Cartridge Color Calibration Utility DESCRIPTION Perform color calibration on HPLIP supported inkjet printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-colorcal [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or…
NAME hp-clean – Printer Printhead Cleaning Utility DESCRIPTION Printhead cleaning utility for HPLIP supported inkjet printers. SYNOPSIS hp-clean [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive OPTIONS Set the logging level: -l<level> or –logging=<level> <level>: none,…
NAME hp-check – Dependency/Version Check Utility DESCRIPTION Checks dependency versions,permissions of HPLIP. (Run as ‘python ./check.py’ from the HPLIP tarball before installation.) SYNOPSIS hp-check [OPTIONS] OPTIONS Compile-time check: -c or –compile Run-time check: -r or –run or –runtime Compile and run-time checks: -b or –both (default) Set the logging level: -l<level> or –logging=<level> <level>: none,…
NAME hp-align – Printer Cartridge Alignment Utility DESCRIPTION Cartridge alignment utility for HPLIP supported inkjet printers. (Note: Not all printers require the use of this utility). SYNOPSIS hp-align [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS] PRINTER|DEVICE-URI To specify a device-URI: -d<device-uri> or –device=<device-uri> To specify a CUPS printer: -p<printer> or –printer=<printer> MODE Run in interactive mode: -i or –interactive…
NAME hotspotter – Create CVA image from seamount locations SYNOPSIS hotspotter [tables] rotfile CVAgrid increment region [ upper_age ] [ ] [ ] [ [level] ] [ -bi<binary> ] [ -di<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -o<flags> ] [ -:[i|o] ] Note: No space is allowed between the option flag and the…
NAME gethostname, gethostbyname, gethostbyaddr, getservbyname – get local host information SYNTAX $SGE_ROOT/utilbin/$ARCH/gethostname [-help|-name|-aname|-all] $SGE_ROOT/utilbin/$ARCH/gethostbyname [-help|-name|-aname|-all] name $SGE_ROOT/utilbin/$ARCH/gethostbyaddr [-help|-name|-aname|-all] ip $SGE_ROOT/utilbin/$ARCH/getservbyname [-help|-number] service DESCRIPTION gethostname and gethostbyname are used to get the local resolved host name. gethostbyaddr is used to get the hostname of a specified IP address (dotted decimal notation). getservbyname can be used to get the configured port…
NAME hostnamectl – Control the system hostname SYNOPSIS hostnamectl [OPTIONS…] {COMMAND} DESCRIPTION hostnamectl may be used to query and change the system hostname and related settings. systemd-hostnamed.service(8) and this tool distinguish three different hostnames: the high-level "pretty" hostname which might include all kinds of special characters (e.g. "Lennart’s Laptop"), the "static" hostname which is the…