Section 8: administration and privileged commands
ipsec – invoke IPsec utilities Synopsis ipsec command [argument…] ipsec –help ipsec –version ipsec –directory Description ipsec invokes any of several utilities involved in controlling the IPsec encryption/authentication system, running the specified command with the specified arguments as if it had been invoked directly. This largely eliminates possible name collisions with other software, and also…
iprupdate – IBM Power RAID adapter/device microcode update utility Synopsis iprupdate iprupdate –debug –check_only –daemon –use-polling –use-uevents Description iprupdate is used to update the microcode on IBM storage adapters and the disk units attached to them to a minimum supported level. It can be run at any time while the ipr device driver is loaded….
iprsos – IBM Power RAID report generator Synopsis iprsos Description iprsos is used to generate an sosreport-like report by collecting hardware information from the system, along with other system calls such as lspci, lscsi, and others. The information is collected from ‘iprconfig’ commands and printed on stdin by default. User can specify the log file…
iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…
iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…
iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…
iprop-log – maintain the iprop log file Synopsis [–version ] [-h | –help ] command iprop-log truncate [-c file | –config-file= file ] [-r string | –realm= string ] [-h | –help ] iprop-log dump [-c file | –config-file= file ] [-r string | –realm= string ] [-h | –help ] iprop-log replay [–start-version= version-number…
iprofd – Modem-register daemon Synopsis iprofd registerfile Description iprofd is used to make the modem-register settings of the isdn-ttys AT-emulator permanent and restore them during boot-time. It is usually started from within a rc-script and puts itself into background. If registerfile already exists at startup, all modem-registers are restored from it’s contents. After that, iprofd…
iprinit – IBM Power RAID adapter/device initialization utility Synopsis iprinit iprinit –debug –daemon –use-polling –use-uevents Description iprinit is used to setup IBM Power RAID adapters and devices for optimal performance. It will enable U320 scsi speeds if it is determined the disk enclosure supports it. It will also enable tagged command queuing. Any scsi bus…
iprdump – IBM Power RAID adapter dump utility Synopsis iprdump [-d directory] iprdump –version –debug –use-polling –use-uevents Description iprdump is used to gather information in the event of an adapter failure. The dump data will by default be saved in the /var/log/ directory with the prefix iprdump.# where # will be the dump ID of…
iprdbg – IBM Power RAID storage adapter debug utility Synopsis This executable is part of the package ‘iprutils’: Utilities for the IBM Power Linux RAID Adapters Description iprdbg is used to debug IBM Power RAID storage adapters. Exit Status -EINVAL Invalid input. -ENXIO No IOA devices. Or an exit status of specified command. Files /etc/iprdbg.conf…
iprconfig – IBM Power RAID storage adapter configuration/recovery utility Synopsis iprconfig [-e editor] [-k dir] [-c command] iprconfig –version –debug –force Description iprconfig is used to configure IBM Power RAID storage adapters, display information about them, and to perform adapter and disk unit recovery. The menu options are: 1. Display hardware status. This option can…
ippusbxd – Communication driver for IPP-over-USB class printers Synopsis ippusbxd [-v|–vid VENDOR_ID] [-m|–pid PRODUCT_ID] [-s|–serial SERIAL_NUMBER] [–bus BUS] [–device DEVICE] [–bus-device BUS:DEVICE] [-p|–only-port PORT_NUMBER] [-P|–from-port PORT_NUMBER] [-i|–interface INTERFACE] [-l|–logging] [-q|–verbose] [-d|–debug] [-n|–no-fork] [-B|–no-broadcast] [-N|–no-printer] Description ippusbxd connects to a IPP-over-USB printer and exposes it to a network interface (like localhost or dummy0) on a given…
pppstats – print PPP statistics Synopsis pppstats [ -v ] [ -r ] [ -c ] [ -i <secs> ] [ <unit#> ] Description pppstats prints PPP-related statistics. The -v flag causes pppstats to display additional statistics, such as the number of packets tossed (that is, which the VJ TCP header decompression code rejected)….
ipppd – (ISDN) Point to Point Protocol daemon Synopsis /usr/sbin/ipppd [ options ] [ device ] Description The Point-to-Point Protocol (PPP) provides a method for transmitting datagrams over serial point-to-point links. PPP is composed of three parts: a method for encapsulating datagrams over serial links, an extensible Link Control Protocol (LCP), and a family of…
ipp-usb – Daemon for IPP over USB printer support Description ipp-usb daemon enables driver-less printing and scanning on USB-only AirPrint-compatible printers and MFPs. It works by connecting to the device by USB using IPP-over-USB protocol, and exposing the device to the network, including DNS-SD (ZeroConf) advertising. IPP printing, eSCL scanning and web console are fully…
ipmiutil – a meta-command to invoke various IPMI functions. Synopsis ipmiutil <command> [-x -NUPREFJTVY] [other command options] Description This utility performs various IPMI functions. Each of the individual commands in the ipmiutil project can be invoked via this meta-command. The <command> is one of the following: alarms show/set the front panel alarm LEDs and relays leds show/set…
ipmiseld – IPMI SEL logging daemon Synopsis ipmiseld [OPTION…] Description The ipmiseld daemon polls the system event log (SEL) of specified hosts and stores the logs into the local syslog. By default, the daemon can also make best efforts to manage the remote SEL’s buffer to ensure events are never lost. Recent logging data will…
ipmipower – IPMI power control utility Synopsis ipmipower [OPTION…] Description ipmipower allows users to remotely power on, off, cycle, hard reset, get a power status query, perform a pulse diagnostic interrupt, or initiate a soft-shutdown of the OS via ACPI through the IPMI over LAN protocol. When a power command (–on, –off, –cycle, –reset, –stat,…
ipmiping – send IPMI Get Authentication Capabilitiy request to network hosts Synopsis ipmiping [OPTION…] destination Description ipmiping uses the IPMI Get Channel Authentication Capabilities request datagram to elicit an IPMI Get Channel Authentication Capabilitiesl response from a remote host. The utility can be used to verify if a remote host supports IPMI. The initial starting…