Section 8: administration and privileged commands
ipmi-dcmi – IPMI DCMI utility Synopsis ipmi-dcmi [OPTION…] Description Ipmi-dcmi is used to execute Data Center Manageability Interface (often referred to as DCM or DCMI) IPMI extension commands. DCMI extensions include support for asset management and power usage management. Most will be interested in DCMI for its power management features. By configuring an exception action,…
ipmiconsole – IPMI console utility Synopsis ipmiconsole [OPTION…] Description ipmiconsole is a Serial-over-LAN (SOL) console utility. It can be used to establish console sessions to remote machines using the IPMI 2.0 SOL protocol. Ipmiconsole communicates with a remote machine’s Baseboard Management Controller (BMC) to establish a console session. Before any SOL communication can take place,…
ipmi-chassis – IPMI chassis management utility Synopsis ipmi-chassis [OPTION…] Description Ipmi-chassis is used for managing/monitoring an IPMI chassis, such as chassis power, indentification (i.e. LED control), and status. See OPTIONS below for all chassis management options available. Listed below are general IPMI options, tool specific options, trouble shooting information, workaround information, examples, and known issues….
ipmi-chassis-config – configure chassis fields Synopsis ipmi-chassis-config [OPTION…] Description Ipmi-chassis-config is used to get and set chassis configuration parameters, such as boot device and power restore policy configuration. Most IPMI users will not need to use this tool, although some may need it for advanced configuration. For more general chassis management such as power control…
ipmaddr – adds, deletes, and displays multicast addresses Synopsis /usr/sbin/ipmaddr [<operation>] [<args>] Note This program is obsolete. For replacement check ip maddr. Description The ipmaddr command can perform one of the following operations: add – add a multicast address del – delete a multicast address show – list multicast addresses See Also ip(8).
ipmiutil_picmg – send specific PICMG extended IPMI commands Synopsis ipmiutil picmg [-mixNUPREFJTVY] parameters Description This ipmiutil picmg subcommand sends specific PICMG/ATCA extended IPMI commands to the firmware. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface…
ipactl – IPA Server Control Interface Synopsis ipactl command Description A tool to help an administer control an IPA environment. IPA glues several discrete services together to work in concert and the order that these services are started and stopped is important. ipactl ensures that they are started and stopped in the correct order. IPA…
ipa_otpd_selinux – Security Enhanced Linux Policy for the ipa_otpd processes Description Security-Enhanced Linux secures the ipa_otpd processes via flexible mandatory access control. The ipa_otpd processes execute with the ipa_otpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ipa_helper_selinux – Security Enhanced Linux Policy for the ipa_helper processes Description Security-Enhanced Linux secures the ipa_helper processes via flexible mandatory access control. The ipa_helper processes execute with the ipa_helper_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ipa_dnskey_selinux – Security Enhanced Linux Policy for the ipa_dnskey processes Description Security-Enhanced Linux secures the ipa_dnskey processes via flexible mandatory access control. The ipa_dnskey processes execute with the ipa_dnskey_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ipa-upgradeconfig – Upgrade the IPA Apache configuration Synopsis ipa-upgradeconfig Description A tool to update the IPA Apache configuration during an upgrade. It examines the VERSION value in the head of /etc/httpd/conf.d/ipa.conf and /etc/httpd/conf.d/ipa-rewrite.conf and compares this with the templates. If an update is needed then new files are written. It also will convert a CA…
iptables/ip6tables — administration tool for IPv4/IPv6 packet filtering and NAT Synopsis iptables [-t table] {-A|-C|-D} chain rule-specification ip6tables [-t table] {-A|-C|-D} chain rule-specification iptables [-t table] -I chain [rulenum] rule-specification iptables [-t table] -R chain rulenum rule-specification iptables [-t table] -D chain rulenum iptables [-t table] -S [chain [rulenum]] iptables [-t table] {-F|-L|-Z} [chain [rulenum]]…
iptables-translate — translation tool to migrate from iptables to nftables ip6tables-translate — translation tool to migrate from ip6tables to nftables Description There is a set of tools to help the system administrator translate a given ruleset from iptables(8) and ip6tables(8) to nftables(8). The available commands are: • iptables-translate • iptables-restore-translate • ip6tables-translate • ip6tables-restore-translate Usage…
iptables-save — dump iptables rules ip6tables-save — dump iptables rules Synopsis iptables-save [-M modprobe] [-c] [-t table] [-f filename] ip6tables-save [-M modprobe] [-c] [-t table] [-f filename] Description iptables-save and ip6tables-save are used to dump the contents of IP or IPv6 Table in easily parseable format either to STDOUT or to a specified file. -M,…
iptables-restore — Restore IP Tables ip6tables-restore — Restore IPv6 Tables Synopsis iptables-restore [-chntvV] [-w secs] [-W usecs] [-M modprobe] [-T name] [file] ip6tables-restore [-chntvV] [-w secs] [-W usecs] [-M modprobe] [-T name] [file] Description iptables-restore and ip6tables-restore are used to restore IP and IPv6 Tables from data specified on STDIN or in file. Use I/O…
iptables-translate — translation tool to migrate from iptables to nftables ip6tables-translate — translation tool to migrate from ip6tables to nftables Description There is a set of tools to help the system administrator translate a given ruleset from iptables(8) and ip6tables(8) to nftables(8). The available commands are: • iptables-translate • iptables-restore-translate • ip6tables-translate • ip6tables-restore-translate Usage…
xtables-nft — iptables using nftables kernel api Description xtables-nft are versions of iptables that use the nftables API. This is a set of tools to help the system administrator migrate the ruleset from iptables(8), ip6tables(8), arptables(8), and ebtables(8) to nftables(8). The xtables-nft set is composed of several commands: • iptables-nft • iptables-nft-save • iptables-nft-restore •…
xtables-nft — iptables using nftables kernel api Description xtables-nft are versions of iptables that use the nftables API. This is a set of tools to help the system administrator migrate the ruleset from iptables(8), ip6tables(8), arptables(8), and ebtables(8) to nftables(8). The xtables-nft set is composed of several commands: • iptables-nft • iptables-nft-save • iptables-nft-restore •…
xtables-nft — iptables using nftables kernel api Description xtables-nft are versions of iptables that use the nftables API. This is a set of tools to help the system administrator migrate the ruleset from iptables(8), ip6tables(8), arptables(8), and ebtables(8) to nftables(8). The xtables-nft set is composed of several commands: • iptables-nft • iptables-nft-save • iptables-nft-restore •…
xtables-legacy — iptables using old getsockopt/setsockopt-based kernel api Description xtables-legacy are the original versions of iptables that use old getsockopt/setsockopt-based kernel interface. This kernel interface has some limitations, therefore iptables can also be used with the newer nf_tables based API. See xtables-nft(8) for information about the xtables-nft variants of iptables. Usage The xtables-legacy-multi binary can…