Section 8: administration and privileged commands
rndc-confgen – rndc key generation tool Synopsis rndc-confgen [-a] [-b keysize] [-c keyfile] [-h] [-k keyname] [-p port] [-r randomfile] [-s address] [-t chrootdir] [-u user] Description rndc-confgen generates configuration files for rndc. It can be used as a convenient alternative to writing the rndc.conf file and the corresponding controls and key statements in named.conf by hand. Alternatively, it can be run with…
rmt – remote magnetic tape server Synopsis rmt Description Rmt provides remote access to files and devices for tar(1), cpio(1), and similar backup utilities. It is normally called by running rsh(1) or ssh(1) to the remote machine, optionally using a different login name if one is supplied. The calling program communicates with rmt by sending…
rmt – remote magnetic tape server Synopsis rmt Description Rmt provides remote access to files and devices for tar(1), cpio(1), and similar backup utilities. It is normally called by running rsh(1) or ssh(1) to the remote machine, optionally using a different login name if one is supplied. The calling program communicates with rmt by sending…
* Name rmnews – expunge and remove news articles Synopsis rmnews Description Rmnews reads article data from the standard input. It then expunges and removes the listed articles. Rmnews is designed to be used by InterNetNews to remove canceled, superseded, and expired news articles. The input is processed as an INN expirerm file listing or…
rmmod – Simple program to remove a module from the Linux Kernel Synopsis rmmod [-f] [-s] [-v] [modulename] Description rmmod is a trivial program to remove a module (when module unloading support is provided) from the kernel. Most users will want to use modprobe(8) with the -r option instead. Options -v, –verbose Print messages about…
rmcpping – send RMCP Ping to network hosts Synopsis rmcpping [OPTION…] destination Description rmcpping uses the RMCP Ping request datagram to elicit an RMCP Pong response from a remote host. The utility can be used to verify if a remote host supports RMCP or IPMI. The initial starting sequence number will be randomized. rmcpping will…
rmcp – remove NILFS2 checkpoints Synopsis rmcp [options] [device] checkpoint-range … Description rmcp is a utility for removing checkpoints from the NILFS2 file system found in device. The checkpoints which user wants to remove are specified with one or more checkpoint-ranges. When device is omitted, rmcp tries to find a NILFS2 file system from /proc/mounts….
rmcpping – send RMCP Ping to network hosts Synopsis rmcpping [OPTION…] destination Description rmcpping uses the RMCP Ping request datagram to elicit an RMCP Pong response from a remote host. The utility can be used to verify if a remote host supports RMCP or IPMI. The initial starting sequence number will be randomized. rmcpping will…
rmail – handle remote mail received via uucp Synopsis rmail [-D domain] [-T] user … Description Rmail interprets incoming mail received via uucp(1), collapsing “From” lines in the form generated by mail.local(8) into a single line of the form “return-path!sender”, and passing the processed mail on to sendmail(8). Rmail is explicitly designed for use with…
rmail – handle remote mail received via uucp Synopsis rmail user … Description Rmail interprets incoming mail received via uucp(1), collapsing “From” lines in the form generated by mail.local(8) into a single line of the form “return-path!sender”, and passing the processed mail on to sendmail(8). Rmail is explicitly designed for use with uucp and sendmail….
rltraceroute6 – IPv6 traceroute tool tcptraceroute6 – TCP/IPv6 traceroute tool Synopsis traceroute6 [-AdEILlnrSU] [-f min_hop] [-g hop] [ -i iface] [-m max_hop] [-p port] [-q attempts] [ -s source] [-t tclass] [-w wait] [-z delay_ms] < hostname/address> [packet length] tcptraceroute6 [-AdEnrS] [-f min_hop] [-g hop] [ -i iface] [-l packet_size] [-m max_hop] [-p port] […
rlogind_selinux – Security Enhanced Linux Policy for the rlogind processes Description Security-Enhanced Linux secures the rlogind processes via flexible mandatory access control. The rlogind processes execute with the rlogind_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
rlm_ippool_tool – dump the contents of the FreeRadius ippool database files Synopsis If an ipaddress is specified then that address is used to limit the actions or output. rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress] Mark the entry nasIP/nasPort as having ipaddress rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort Update old format database to…
rkhunter – RootKit Hunter Synopsis rkhunter {–check | –unlock | –update | –versioncheck | –propupd [{filename | directory | package name},…] | –list [tests | {lang | languages} | rootkits | perl | propfiles] | –config-check | –version | –help} [options] Description rkhunter is a shell script which carries out various checks on the local system to try and detect known rootkits…
ripngd – a RIPNG routing engine for use with Quagga routing software. Synopsis ripngd [ -dhlrv ] [ -f config-file ] [ -i pid-file ] [ -P port-number ] [ -A vty-address ] [ -u user ] [ -g group ] Description ripngd is a routing component that works with the Quagga routing engine. Options…
ripd – a RIP routing engine for use with Quagga routing software. Synopsis ripd [ -dhrv ] [ -f config-file ] [ -i pid-file ] [ -P port-number ] [ -A vty-address ] [ -u user ] [ -g group ] Description ripd is a routing component that works with the Quagga routing engine. Options…
rip98d – Send and receive RIP98 routing messages Synopsis rip98d [-d] [-l] [-r] [-t interval] [-v] Description The RIP98 routing protocol was devised by John Wiseman G8BPQ as an alternative to both traditional RIP and RSPF for use in an RF environment. Its main advantage is that each routing element only takes six bytes and…
rigctld – Hamlib TCP rig control daemon Synopsis rigctld [OPTION]… Description The rigctld program is a NEW Hamlib rig control daemon ready for testing that handles client requests via TCP sockets. This allows multiple user programs to share one radio (this needs testing), except on Win32 where pthreads are not available. Multiple radios can be…
riello_usb – Driver for Riello UPS Protocol UPS equipment via USB Synopsis riello_usb -h riello_usb -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the riello_usb driver. For information about the core driver, see nutupsdrv(8). Supported Hardware riello_usb supports all recent Riello UPS with USB. Older Riello UPS products are not…
riello_ser – Driver for Riello UPS Protocol UPS equipment Synopsis riello_ser -h riello_ser -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the riello_ser driver. For information about the core driver, see nutupsdrv(8). Supported Hardware riello_ser supports all recent Riello UPS, Aros UPS models which use the Riello UPS GPSER and…