The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
NAME mord – compute sparse matrix orderings of meshes SYNOPSIS mord[options][mfile][ofile][lfile] DESCRIPTION The mord program computes, in a sequential way, an ordering of a Scotch source mesh representing the pattern of some symmetric sparse matrix. Only nodes of the mesh are effectively ordered. Elements provide connectivity information, such that every node is considered to be…
NAME mmk_m2, mmk_m3 – create source meshes SYNOPSIS mmk_m2[options][-gcfile] dimX dimY[ofile] mmk_m3[options][-gcfile] dimX dimY dimZ[ofile] DESCRIPTION The mmk_* programs create source mesh files for some common, regular topologies. mmk_m2 creates a 2D regular mesh of dimX times dimY elements and (dimX+1) times (dimY+1) nodes, such that element (i,j) is connected to nodes (i,j), (i,j+1), (i+1,j)…
NAME gtst – test the consistency of source graphs SYNOPSIS gtst[options][gfile][lfile] DESCRIPTION The gtst program checks, in a sequential way, the consistency of a Scotch source graph and, in case of success, outputs some statistics regarding edge weights, vertex weights, and vertex degrees. It produces the very same results as the dgtst(1) program of the…
NAME gout – output graphics from matrices and graphs SYNOPSIS gout[options][gfile][xfile][mfile][vfile] DESCRIPTION The gout program creates graphics files of various types, representing the Scotch graph and mapping data which is passed to it. Source graph file gfile can only be a centralized graph file. File xfile stores its associated geometry, whenever necessary. File mfile represents…
NAME gomtst – compute statistics on sparse matrix orderings SYNOPSIS gotst[options][gfile][ofile][lfile] DESCRIPTION The gotst program computes, in a sequential way, statistics on a sparse matrix ordering, such as fill-in, operation count, and separator tree parameters: minimum, maximum, average height and variance of its leaves. Source graph file gfile can only be a centralized graph file….
NAME gord – compute sparse matrix orderings of graphs SYNOPSIS gord[options][gfile][ofile][lfile] DESCRIPTION The gord program computes, in a sequential way, an ordering of a Scotch source graph representing the pattern of some symmetric sparse matrix. Source graph file gfile can only be a centralized graph file. The resulting ordering is stored in file ofile. Eventual…
NAME gmtst – compute statistics on mappings SYNOPSIS gmtst[options][gfile][tfile][mfile][lfile] DESCRIPTION The gmtst program computes, in a sequential way, statistics on a static mapping, such as load imbalance ratio, edge dilation distribution, etc. It yields the same results as the ones produced by the -vm option of the gmap(1) program. Source graph file gfile can only…
NAME gmk_msh – create source graph from source mesh SYNOPSIS gmk_msh[options][mfile][gfile] DESCRIPTION The gmk_msh program creates a source graph from a source mesh. The vertices of the graph are the nodes of the mesh, and all mesh elements are turned into cliques, that is, there exists an edge between two vertices in the graph if…
NAME gmk_hy, gmk_m2, gmk_m3, gmk_ub2 – create source graphs SYNOPSIS gmk_hy[options] dim[ofile] gmk_m2[options][-gcfile] dimX dimY[ofile] gmk_m3[options][-gcfile] dimX dimY dimZ[ofile] gmk_ub2[options] dim DESCRIPTION The gmk_* programs create source graph files for some common, regular topologies. gmk_hy creates a hypercube of dimension dim. gmk_m2 creates a 2D regular grid of dimensions dimX and dimY. gmk_m3 creates a…
NAME gmap, gpart – compute static mappings and partitions sequentially SYNOPSIS gmap[options][gfile][tfile][mfile][lfile] gpart[options][nparts][gfile][mfile][lfile] DESCRIPTION The gmap program computes, in a sequential way, a static mapping of a source graph onto a target graph. The gpart program is a shortcut of gmap for computing unweighted partitions of a source graph. Source graph file gfile can only…
NAME gcv – graph file converter SYNOPSIS gcv[options][igfile][ogfile][oxfile] DESCRIPTION The gcv program converts Scotch graph files from and to other external file formats. File igfile is converted into graph file ogfile, with optional geometry data being put in geometry file oxfile, if it is available. When file names are not specified, data is read from…
NAME atst – test the consistency of target architectures SYNOPSIS atst[options][afile][lfile] DESCRIPTION The atst program checks the consistency of a Scotch decomposition-defined target architecture and, in case of success, outputs some statistics regarding the number of target vertices and the length of paths linking them. Target architectures define the topology of the target graphs used…
NAME amk_ccc, amk_fft2, amk_hy, amk_m2, amk_p2 – create target architectures SYNOPSIS amk_ccc[options] dim[tfile] amk_fft2[options] dim[tfile] amk_hy[options] dim[tfile] amk_m2[options] dimX[dimY][tfile] amk_p2[options][wght0][wght1][tfile] DESCRIPTION The amk_* programs create target architecture files for some common, regular topologies. amk_ccc creates a decomposition-defined cube-connected-cycle topology of dimension dim. The decomposition is performed first by bisection along the dimensions of the hypercube,…
NAME scor2prt – source-parts separation program for pmx, a MusiXTeX preprocessor SYNOPSIS scor2prt basename[.pmx] DESCRIPTION scor2prt is part of pmx(1), a preprocessor for MusiXTeX. It can automatically create parts from a score by generating a set of .pmx files, one for each part, from a single .pmx file for the score. The appearance of the…
NAME scls – The scls program is used to list objects in checkpoint files. Running scls scls takes the following command line options followed by a list of files. -memorygrp val Which memory group to use. -threadgrp val Which thread group to use. -messagegrp val Which message group to use. -W val Set the working…
NAME sclient – sample Kerberos version 5 client SYNOPSIS sclient remotehost DESCRIPTION sclient is a sample application, primarily useful for testing purposes. It contacts a sample server sserver(8) and authenticates to it using Kerberos version 5 tickets, then displays the server’s response. SEE ALSO kinit(1), sserver(8) AUTHOR MIT COPYRIGHT 1985-2016, MIT Index
NAME scl2trd – Convert .scl disk images to .trd. SYNOPSIS scl2trd sclfile trdfile DESCRIPTION scl2trd converts a .scl disk file to a 80 track, double sided (640 KB) .trd disk file. OPTIONS sclfile specifies a .scl file whose contents are to be converted. trdfile specifies a .trd file to create. BUGS None known. SEE ALSO…
NAME scl – Setup and run software from Software Collection environment SYNOPSIS scl <action> <collection1> [<collection2> …] <command> scl <action> <collection1> [<collection2> …] — <command> scl {-l|–list} [<collection1> <collection2> …] scl register <path> scl deregister <collection> [–force] DESCRIPTION This manual page documents scl, a program which is an utility for running software packaged as a…
Name schemagen – Java(TM) Architecture for XML Binding Schema Generator Specification Version: 2.1 Implementation Version: 2.1.3 Launching schemagen The schema generator can be launched using the appropriate schemagen shell script in the bin directory for your platform. The current schema generator can process either Java source files or class files. We also provide an Ant…
schemagen – Generates a schema for every name space that is referenced in your Java classes. Synopsis schemagen [ options ] java-files options The command-line options. See Options. java-files The Java class files to be processed. Description The schema generator creates a schema file for each name space referenced in your Java classes. Currently, you…