The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
GSQL – an integrated database development environment for GNOME VersionCurrent version is 0.2.1 Synopsisgsql [options] DescriptionGSQL is a gtk2-based modular development tool for various RDBMS, such as Oracle, MySQL, PostgreSQL and others OptionsThe following options are provided by GSQL using the standard GNU command line syntax: –enable-debug Print debugging messages to stdout. –enable-trace Print tracing…
gspiceui – GUI frontend for various electronic circuit simulation engines Synopsisgspiceui [-v] [-h] [-r RCFILE] [-s SIMENG] [-a ANA] [-g [PROC]] [-w VIEWER] [FILE/S] DescriptionGNU Spice GUI (gSpiceUI) is intended to provide a GUI for various freely available electronic circuit simulation engines ie. GNU-Cap and NG-Spice. It uses gNetList to convert schematic files to net…
gspectrum – a small spectrum viewer application Synopsis gspectrum [OPTION(S)…] [FILE…]Descriptiongspectrum is a simple spectrum visualizer. It is only able to display files in the JCAMP-DX format. OptionsThe following options are accepted: -?, –help Show application help options. –help-all, –help-* Print all or just a group of help options. These options are not documented here….
gspath – Utility to display standard directory/path information Synopsisgspath DescriptionThis utility can be used to print out a single directory or path in order for external applications to know what paths the GNUstep system is using. It was written to provide information for the GNUstep make package. The gspath usility is called with exactly one…
gsnd – Run ghostscript (PostScript and PDF engine) without display Synopsisgsnd [ options ] [ files ] … DescriptionThis script simply invokes gs(1) with the -NODISPLAY flag, followed by any other arguments from the command-line. See Alsogs(1) VersionThis document was last revised for Ghostscript version 9.55.0. AuthorArtifex Software, Inc. are the primary maintainers of Ghostscript….
GSmartControl – Hard disk drive health inspection tool Synopsisgsmartcontrol [OPTIONS] DescriptionGSmartControl is a graphical user interface for smartctl (from smartmontools), which is a tool for querying and controlling SMART (Self-Monitoring, Analysis, and Reporting Technology) data on modern hard disk drives. It allows you to inspect the drive’s SMART data to determine its health, as well…
gslp – Format and print text using ghostscript gsbj – Format and print text for BubbleJet printer using ghostscript gsdj – Format and print text for DeskJet printer using ghostscript gsdj500 – Format and print text for DeskJet 500 BubbleJet using ghostscript gslj – Format and print text for LaserJet printer using ghostscript Synopsisgslp -12BclqRr…
gslp – Format and print text using ghostscript gsbj – Format and print text for BubbleJet printer using ghostscript gsdj – Format and print text for DeskJet printer using ghostscript gsdj500 – Format and print text for DeskJet 500 BubbleJet using ghostscript gslj – Format and print text for LaserJet printer using ghostscript Synopsisgslp -12BclqRr…
gsl-randist – generate random samples from various distributions Synopsysgsl-randist seed n DIST param1 param2 [..] Descriptiongsl-randist is a demonstration program for the GNU Scientific Library. It generates n random samples from the distribution DIST using the distribution parameters param1, param2, … ExampleHere is an example. We generate 10000 random samples from a Cauchy distribution with…
gsl-histogram – compute histogram of data on stdin Synopsysgsl-histogram xmin xmax [n] Descriptiongsl-histogram is a demonstration program for the GNU Scientific Library. It takes three arguments, specifying the upper and lower bounds of the histogram and the number of bins. It then reads numbers from `stdin’, one line at a time, and adds them to…
gsl-config – script to get version number and compiler flags of the installed GSL library Synopsisgsl-config [–prefix] [–version] [–libs] [–libs-without-cblas] [–cflags] Descriptiongsl-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use GSL. It is also used internally to…
ssh – OpenSSH SSH client (remote login program) Synopsisssh -words [-1246AaCfgKkMNnqsTtVvXxYy [-b bind_address ] ] [-c cipher_spec ] [-D [bind_address : port ] ] [-E log_file ] [-e escape_char ] [-F configfile ] [-I pkcs11 ] [-i identity_file ] [-L [bind_address : port : host : hostport ] ] [-l login_name ] [-m mac_spec ]…
ssh-keygen – authentication key generation, management and conversion Synopsis-words ssh-keygen [-q ] [-b bits ] [-t type ] [-N new_passphrase ] [-C comment ] [-f output_keyfile ] ssh-keygen –p [-P old_passphrase ] [-N new_passphrase ] [-f keyfile ] ssh-keygen –i [-m key_format ] [-f input_keyfile ] ssh-keygen –e [-m key_format ] [-f input_keyfile ] ssh-keygen…
ssh – OpenSSH SSH client (remote login program) Synopsisssh -words [-1246AaCfgKkMNnqsTtVvXxYy [-b bind_address ] ] [-c cipher_spec ] [-D [bind_address : port ] ] [-E log_file ] [-e escape_char ] [-F configfile ] [-I pkcs11 ] [-i identity_file ] [-L [bind_address : port : host : hostport ] ] [-l login_name ] [-m mac_spec ]…
sftp – secure file transfer program Synopsissftp -words [-1246aCfpqrv ] [-B buffer_size ] [-b batchfile ] [-c cipher ] [-D sftp_server_path ] [-F ssh_config ] [-i identity_file ] [-l limit ] [-o ssh_option ] [-P port ] [-R num_requests ] [-S program ] [-s subsystem | sftp_server ] host sftp [user @ host [: file…
scp – secure copy (remote file copy program) Synopsisscp -words [-12346BCpqrv ] [-c cipher ] [-F ssh_config ] [-i identity_file ] [-l limit ] [-o ssh_option ] [-P port ] [-S program ] [[user @ ] host1 : file1 ] … [[user @ ] host2 : file2 ] Descriptionscp copies files between hosts on a…
gsi – Gambit-C Scheme Interpreter and Compiler Synopsisgsi [ –:arg,… ] [ -f ] [ -v ] [[-] [ -e ] [ file ]]… gsc [options] [files] gsc-script, gsi-script, scheme-ieee-1178-1990, scheme-r4rs, scheme-srfi-0, six, and six-script: currently synonyms for gsi. scheme-r5rs is registered in the Debian alternatives system and can be configured to point at gsi….
gshhs2grass – Extracting GSHHS and WDBII data in GRASS-compatible ASCII format Synopsisgshhs2grass -i gshhs_[f|h|i|l|c].b [ -xminx ] [-Xmaxx ] [ -yminy ] [ -Ymaxy ] Descriptiongshhs2grass reads the binary coastline (GSHHS) and and translates it into an ASCII format suitable for import into GRASS. It automatically handles byte-swabbing between different architectures. gshhs_[f|h|i|l|c].b One of the…
gshhs_dp – Line reduction using the Douglas-Peucker algorithm Synopsisgshhs_dp input.b tolerance output.b [-v] Descriptiongshhs_dp reads the binary coastline (GSHHS) or political boundary or river (WDBII) files and and reduces the complexity of the line by applying the Douglas-Peucker algorithm. It automatically handles byte-swabbing between different architectures. input.b GSHHS or WDBII binary data file as distributed…
gshhs – Extract ASCII listings from binary GSHHS or WDBII data files Synopsisgshhs binaryfile.b [ -Iid ] [ -L ] [ -M ] > asciifile.txt Descriptiongshhs reads the binary coastline (GSHHS) or political boundary or river (WDBII) files and extracts an ASCII listing. It automatically handles byte-swabbing between different architectures. Optionally, only segment header info…