Linux Manuals

ipsec_addconn – load a given policy into the pluto IKE daemon Synopsis ipsec addconn –configsetup [–rootdir dir] [–config filename] [–ctlbase socketfile] [–verbose] [–noexport] [–warningsfatal] ipsec addconn –liststack [–rootdir dir] [–config filename] [–ctlbase socketfile] [–verbose] [–noexport] [–warningsfatal] ipsec addconn –checkconfig [–rootdir dir] [–config filename] [–ctlbase socketfile] [–verbose] [–warningsfatal] ipsec addconn –autoall [–rootdir dir] [–config filename] [–ctlbase socketfile] [–verbose] [–warningsfatal] ipsec addconn [–rootdir dir] [–config filename] [–ctlbase socketfile] [–verbose] [–warningsfatal] name1 [name2…

ipsec__updown – kernel and routing manipulation script Synopsis _updown is invoked by pluto when it has brought up a new connection. This script is used to insert the appropriate routing entries for IPsec operation on some kernel IPsec stacks, such as KLIPS and MAST, and may do other necessary work that is kernel or user…

ipsec__updown.netkey – klips manipulation script Synopsis _updown is invoked by pluto when it has brought up a new connection. This script is used to insert the appropriate routing entries for IPsec operation. The interface to the script is documented in the pluto man page. See Also ipsec(8), ipsec_pluto(8). History Man page written for the Linux…

ipsec__updown – klips manipulation script Synopsis _updown is invoked by pluto when it has brought up a new connection. This script is used to insert the appropriate routing entries for IPsec operation. The interface to the script is documented in the pluto man page. See Also ipsec(8), ipsec_pluto(8). History Man page written for the Linux…

ipsec__updown.klips – klips manipulation script Synopsis _updown is invoked by pluto when it has brought up a new connection. This script is used to insert the appropriate routing entries for IPsec operation. The interface to the script is documented in the pluto man page. See Also ipsec(8), ipsec_pluto(8). History Man page written for the Linux…

ipsec__stackmanager – internal script to bring up kernel components for Libreswan Synopsis ipsec _stackmanager start [–netkey] ipsec _stackmanager stop Description ipsec _stackmanager is called from within the init sub-system (systemd, upstart, sysv initscripts) to bring up the Libreswan kernel component as configured via the protostack= option in the ipsec.conf configuration file. This involves loading and optionally…

ipsec__secretcensor – internal routing to sanitize files Description _secretcensor is called by ipsec barf to process the /etc/ipsec.secrets file to remove the private key components from the file prior to revealing the contents. See Also ipsec(8), ipsec_barf(8). History Man page written for the Linux FreeS/WAN project <m[blue]http://www.freeswan.org/m[]> by Michael Richardson. Original program by Henry Spencer….

ipsec__plutorun – internal script to (re)start pluto on old SYSV initscript systems Description _plutorun is called by _realsetup to configure and bring up pluto(8). It invokes pluto, and watches to makes sure that pluto is restarted if it fails, as the SYSV initscripts do not provide a restart facility. When other init systems are used,…

ipsec__keycensor – internal routine to remove sensitive information Description _keycensor is used by ipsec barf to process the /etc/ipsec.secrets file, removing private key info. See Also ipsec(8), ipsec_barf(8) History Man page written for the Linux FreeS/WAN project <m[blue]http://www.freeswan.org/m[]> by Michael Richardson. Original program by Henry Spencer. Author Paul Wouters placeholder to suppress warning

ipsec__import_crl – helper program for importing a crl to the NSS database Description _import_crl is spawned by pluto in order to add or update a CRL in the NSS database (default: /etc/ipsec.d) See Also pluto(8). History Man page written for the Libreswan project <m[blue]http://www.libreswan.org/m[]> by Matt Rogers Author Matt Rogers placeholder to suppress warning

ipsec – invoke IPsec utilities Synopsis ipsec command [argument…] ipsec –help ipsec –version ipsec –directory Description ipsec invokes any of several utilities involved in controlling the IPsec encryption/authentication system, running the specified command with the specified arguments as if it had been invoked directly. This largely eliminates possible name collisions with other software, and also…

iprupdate – IBM Power RAID adapter/device microcode update utility Synopsis iprupdate iprupdate –debug –check_only –daemon –use-polling –use-uevents Description iprupdate is used to update the microcode on IBM storage adapters and the disk units attached to them to a minimum supported level. It can be run at any time while the ipr device driver is loaded….

iprsos – IBM Power RAID report generator Synopsis iprsos Description iprsos is used to generate an sosreport-like report by collecting hardware information from the system, along with other system calls such as lspci, lscsi, and others. The information is collected from ‘iprconfig’ commands and printed on stdin by default. User can specify the log file…

iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…

iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…

iprop ipropd-master ipropd-slave – propagate changes to a Heimdal Kerberos master KDC to slave KDCs Synopsis ipropd-master [-c string | –-config-file= string ] [-r string | –-realm= string ] [-k kspec | –-keytab= kspec ] [-d file | –-database= file ] [–slave-stats-file= file ] [–time-missing= time ] [–time-gone= time ] [–detach ] [–version ] [–help…

iprop-log – maintain the iprop log file Synopsis [–version ] [-h | –help ] command iprop-log truncate [-c file | –config-file= file ] [-r string | –realm= string ] [-h | –help ] iprop-log dump [-c file | –config-file= file ] [-r string | –realm= string ] [-h | –help ] iprop-log replay [–start-version= version-number…

iprofd – Modem-register daemon Synopsis iprofd registerfile Description iprofd is used to make the modem-register settings of the isdn-ttys AT-emulator permanent and restore them during boot-time. It is usually started from within a rc-script and puts itself into background. If registerfile already exists at startup, all modem-registers are restored from it’s contents. After that, iprofd…

iprinit – IBM Power RAID adapter/device initialization utility Synopsis iprinit iprinit –debug –daemon –use-polling –use-uevents Description iprinit is used to setup IBM Power RAID adapters and devices for optimal performance. It will enable U320 scsi speeds if it is determined the disk enclosure supports it. It will also enable tagged command queuing. Any scsi bus…

iprdump – IBM Power RAID adapter dump utility Synopsis iprdump [-d directory] iprdump –version –debug –use-polling –use-uevents Description iprdump is used to gather information in the event of an adapter failure. The dump data will by default be saved in the /var/log/ directory with the prefix iprdump.# where # will be the dump ID of…