The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
iprdbg – IBM Power RAID storage adapter debug utility Synopsis This executable is part of the package ‘iprutils’: Utilities for the IBM Power Linux RAID Adapters Description iprdbg is used to debug IBM Power RAID storage adapters. Exit Status -EINVAL Invalid input. -ENXIO No IOA devices. Or an exit status of specified command. Files /etc/iprdbg.conf…
iprconfig – IBM Power RAID storage adapter configuration/recovery utility Synopsis iprconfig [-e editor] [-k dir] [-c command] iprconfig –version –debug –force Description iprconfig is used to configure IBM Power RAID storage adapters, display information about them, and to perform adapter and disk unit recovery. The menu options are: 1. Display hardware status. This option can…
ippusbxd – Communication driver for IPP-over-USB class printers Synopsis ippusbxd [-v|–vid VENDOR_ID] [-m|–pid PRODUCT_ID] [-s|–serial SERIAL_NUMBER] [–bus BUS] [–device DEVICE] [–bus-device BUS:DEVICE] [-p|–only-port PORT_NUMBER] [-P|–from-port PORT_NUMBER] [-i|–interface INTERFACE] [-l|–logging] [-q|–verbose] [-d|–debug] [-n|–no-fork] [-B|–no-broadcast] [-N|–no-printer] Description ippusbxd connects to a IPP-over-USB printer and exposes it to a network interface (like localhost or dummy0) on a given…
pppstats – print PPP statistics Synopsis pppstats [ -v ] [ -r ] [ -c ] [ -i <secs> ] [ <unit#> ] Description pppstats prints PPP-related statistics. The -v flag causes pppstats to display additional statistics, such as the number of packets tossed (that is, which the VJ TCP header decompression code rejected)….
ipppd – (ISDN) Point to Point Protocol daemon Synopsis /usr/sbin/ipppd [ options ] [ device ] Description The Point-to-Point Protocol (PPP) provides a method for transmitting datagrams over serial point-to-point links. PPP is composed of three parts: a method for encapsulating datagrams over serial links, an extensible Link Control Protocol (LCP), and a family of…
ipp-usb – Daemon for IPP over USB printer support Description ipp-usb daemon enables driver-less printing and scanning on USB-only AirPrint-compatible printers and MFPs. It works by connecting to the device by USB using IPP-over-USB protocol, and exposing the device to the network, including DNS-SD (ZeroConf) advertising. IPP printing, eSCL scanning and web console are fully…
ipmiutil – a meta-command to invoke various IPMI functions. Synopsis ipmiutil <command> [-x -NUPREFJTVY] [other command options] Description This utility performs various IPMI functions. Each of the individual commands in the ipmiutil project can be invoked via this meta-command. The <command> is one of the following: alarms show/set the front panel alarm LEDs and relays leds show/set…
ipmiseld – IPMI SEL logging daemon Synopsis ipmiseld [OPTION…] Description The ipmiseld daemon polls the system event log (SEL) of specified hosts and stores the logs into the local syslog. By default, the daemon can also make best efforts to manage the remote SEL’s buffer to ensure events are never lost. Recent logging data will…
ipmipower – IPMI power control utility Synopsis ipmipower [OPTION…] Description ipmipower allows users to remotely power on, off, cycle, hard reset, get a power status query, perform a pulse diagnostic interrupt, or initiate a soft-shutdown of the OS via ACPI through the IPMI over LAN protocol. When a power command (–on, –off, –cycle, –reset, –stat,…
ipmiping – send IPMI Get Authentication Capabilitiy request to network hosts Synopsis ipmiping [OPTION…] destination Description ipmiping uses the IPMI Get Channel Authentication Capabilities request datagram to elicit an IPMI Get Channel Authentication Capabilitiesl response from a remote host. The utility can be used to verify if a remote host supports IPMI. The initial starting…
ipmi-sensors – display IPMI sensor information Synopsis ipmi-sensors [OPTION…] Description Ipmi-sensors displays current readings of sensors and sensor data repository (SDR) information. The default display outputs each sensor’s record id, sensor name, sensor type name, sensor reading (if appropriate), and the current sensor event. More verbose information can be found using the verbose options specified…
ipmilan – IPMI LAN to System Interface Converter Synopsis ipmilan [-c configfile] [-i ipmidevice] [-d] [-n] Description The ipmilan daemon allows an IPMI system interface using the OpenIPMI device driver to be accessed using the IPMI 1.5 LAN protocol. ipmilan supports the full authentication capabilities of the IPMI LAN protocol. ipmilan supports multiple IP addresses…
ipmievd_selinux – Security Enhanced Linux Policy for the ipmievd processes Description Security-Enhanced Linux secures the ipmievd processes via flexible mandatory access control. The ipmievd processes execute with the ipmievd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
ipmievd – IPMI event daemon for sending events to syslog Synopsis ipmievd [-c|-h|-d N|-v|-V] -I open <open | sel> [<option>] ipmievd [-c|-h|-v|-V] -I lan -H <hostname> [-p <port>] [-U <username>] [-A <authtype>] [-L <privlvl>] [-a|-E|-P|-f <password>] [-o <oemtype>] [-O <sel oem>] sel [<option>] ipmievd [-c|-h|-v|-V] -I lanplus -H <hostname> [-p <port>] [-U <username>] [-L <privlvl>] [-a|-E|-P|-f <password>] [-o <oemtype>] [-O <sel oem>] [-C <ciphersuite>] sel [<option>] Description ipmievd is a daemon…
ipmidetectd – IPMI node detection monitoring daemon Synopsis ipmidetectd [OPTION…] Description The ipmidetectd daemon regularly sends out IPMI pings to determine if nodes have functioning IPMI interfaces or not. It is primarily used to determine those nodes in the cluster that are not functioning properly, allowing IPMI commands to be executed across the cluster faster…
ipmidetect – list detected and/or undetected IPMI interfaces in a cluster Synopsis ipmidetect [OPTION…] [NODES…] Description ipmidetect lists which IPMI nodes have been detected or undetected in a cluster. This information is provided by the libipmidetect(3) library and ipmidetectd(8) daemon. ipmidetect will output the status of each IPMI node configured with ipmidetectd(8) unless they are…
ipmiconsole – IPMI console utility Synopsis ipmiconsole [OPTION…] Description ipmiconsole is a Serial-over-LAN (SOL) console utility. It can be used to establish console sessions to remote machines using the IPMI 2.0 SOL protocol. Ipmiconsole communicates with a remote machine’s Baseboard Management Controller (BMC) to establish a console session. Before any SOL communication can take place,…
ipmi_port – a daemon to bind RMCP port 623 to prevent portmap from using it Synopsis ipmi_port [-bx] Description This ipmi_port service starts and binds port 623, then sleeps forever, so that the portmap service will not try to reuse port 623, which it otherwise might try to do. Since the IPMI firmware snoops the…
ipmi-sensors – display IPMI sensor information Synopsis ipmi-sensors [OPTION…] Description Ipmi-sensors displays current readings of sensors and sensor data repository (SDR) information. The default display outputs each sensor’s record id, sensor name, sensor type name, sensor reading (if appropriate), and the current sensor event. More verbose information can be found using the verbose options specified…
ipmi-sensors-config – configure sensors Synopsis ipmi-sensors-config [OPTION…] Description Ipmi-sensors-config is used to get and set sensor configuration parameters, such as thresholds and sensor events. This configuration tool is for advanced IPMI users and generally not-required for IPMI to function. Most IPMI users will not need to use this tool. For more general sensor reading and/or…