The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
imontty – display status of all ISDN lines Synopsis imontty [ phonebook ] Description imontty displays the status of all ISDN lines. No options are supported. Read access to /dev/isdninfo is required. It is possible to supply the name of a phonebook file. The phonebook file has the following format: number<tab>name for number The number…
imon – watch ISDN activities Synopsis imon [ -q] [-p phonebook] Description imon is a ncurses based utility for watching ISDN activity. Options -q If this option is given, the facility of terminatig the program by pressing ‘Q’ is disabled and the signals SIGHUP and SIGINT are caught. This option is intended for starting imon…
imgbase – tool to manage writeable filesystems on read-only base images Synopsis imgbase [OPTION…] [<COMMAND> [OPTION…]] Description imgbase provides a specific management method to derive writeable filesystem layers from read-only base images. It also takes care that the layer which shall be used can be selected at boot time. Warning imgbase is a WIP. That…
im-config – set up input method framework configuration Synopsis im-config [OPTION] Options -a List all; force to list all possible input method frameworks in menu or STDOUT even if any associated packages are not installed on the system. -c Use console dialogue. -x Use X dialogue with zenity. -s No action; perform a simulation of…
ilmid – Integrated Local Management Interface Daemon Synopsis ilmid [ -b ] [ -d ] [ -v ] [ -l logfile ] [ -x ] [ -q qos ] [ -i local_ip ] [ -u uni ] <interface> Parameters -b Puts the process in the background. -d Turn on debugging output. -v Verbose. -l logfile Set the location of the…
ipmiutil_lan – show and configure IPMI LAN parameters, users, and set up a PEF rule to send BMC LAN Alerts for OS Critical Stop log events Synopsis ipmiutil lan [-abcdefghijklmnopq#rstuvwxyzBDQK -i eth1 ] [-I ipadr -M macadr -S subnet -B baud_sol ] [-G gwyip -H gwymac -L lan_channel_num ] [-A alertip -X alertmac -C community ] [-u user_to_set…
ikiwiki-mass-rebuild – rebuild all ikiwiki wikis on a system Synopsis ikiwiki-mass-rebuild Description ikiwiki-mass-rebuild can be used to force a rebuild of all the wikis on a system. You will need to list the setup files for the wikis it should build in the file /etc/ikiwiki/wikilist, which has the format: user /path/to/ikiwiki.setup It’s also possible to…
IIPSRV – IIPImage Image Server Description IIPImage is an advanced high-performance feature-rich multi-protocol image server for web-based streamed viewing and zooming of ultra high-resolution images. It is designed to be fast and bandwidth-efficient with low processor and memory requirements. The system can comfortably handle gigapixel size images as well as advanced image features such as…
ipmiutil_hpm – PICMG HPM.1 Upgrade Agent Synopsis ipmiutil hpm [-mxNUPREFJTVY] parameters Description This ipmiutil hpm subcommand updates HPM components using PICMG HPM.1 file This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface if -N. Options Command…
ipmiutil_health- show IPMI health Synopsis ipmiutil health [-ifhglmnopqsx -N node -U user -P/-R pswd -EFJTVY] Description ipmiutil health is a program that uses IPMI commands to show the health of the BMC. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs,…
ipmiutil_getevt – wait for IPMI events Synopsis ipmiutil getevt [-abosx -t secs -N node -U user -P/-R pswd -EFJTVY] Description ipmiutil getevt is a program that uses IPMI commands to wait for IPMI events sent from the BMC firmware. These events are also sent to the IPMI System Event Log (SEL). This utility can use…
ipmiutil_fwum – Update IPMC using Kontron OEM Firmware Update Manager Synopsis ipmiutil fwum [-mixNUPREFJTVY] parameters Description This ipmiutil fwum subcommand updates IPMC firmware using Kontron OEM Firmware Update Manager. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI…
ifup – bring a network interface up ifdown – take a network interface down ifquery – parse interface configuration Synopsis ifup [-nv] [–no-act] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] -a|IFACE… ifup -h|–help ifup -V|–version ifdown [-nv] [–no-act] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] -a|IFACE… ifquery [-nv] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] IFACE… ifquery -l|–list…
iftop – display bandwidth usage on an interface by host Synopsis iftop -h | [-nNpblBP] [-i interface] [-f filter code] [-F net/mask] [-G net6/mask6] Description iftop listens to network traffic on a named interface, or on the first interface it can find which looks like an external interface if none is specified, and displays a…
ifstat – handy utility to read network interface statistics Synopsis ifstat [ OPTIONS ] [ INTERFACE_LIST ] INTERFACE_LIST := INTERFACE_LIST | interface Description ifstat neatly prints out network interface statistics. The utility keeps records of the previous data displayed in history files and by default only shows difference between the last and the current call….
ipmiutil_fru – show Field Replacable Unit configuration data Synopsis ipmiutil fru [-abcdeikmsvx -N node -U user -P/-R pswd -EFJTVY] Description ipmiutil fru is a program that uses IPMI commands to show FRU configuration data and optionally write an asset tag string into the FRU data. Setting the asset tag is a function that can be…
ifrename – rename network interfaces based on various static criteria Synopsis ifrename [-c configfile] [-p] [-d] [-u] [-v] [-V] [-D] ifrename [-c configfile] [-i interface] [-n newname] Description Ifrename is a tool allowing you to assign a consistent name to each of your network interface. By default, interface names are dynamic, and each network interface…
ifup – bring a network interface up ifdown – take a network interface down ifquery – parse interface configuration Synopsis ifup [-nv] [–no-act] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] -a|IFACE… ifup -h|–help ifup -V|–version ifdown [-nv] [–no-act] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] -a|IFACE… ifquery [-nv] [–verbose] [-i FILE|–interfaces=FILE] [–state-dir=DIR] [–allow CLASS] IFACE… ifquery -l|–list…
ifpps – top-like networking and system statistics Synopsis ifpps { [options] | [device] } Description ifpps is a small utility which periodically provides top-like networking and system statistics from the kernel. ifpps gathers its data directly from procfs files and does not make use of any user space monitoring libraries which would falsify statistics under…
ifplugstatus – A link beat detection tool Synopsis ifplugstatus [options] [INTERFACE] Description ifplugstatus is an utility which may be used to detect the link status of a local Linux ethernet device, much in the same way mii-diag, mii-tool and ethtool work. In fact it supports all three different APIs these three tools use. In addition…