The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
idmap_autorid – Samba’s idmap_autorid Backend for Winbind Description The idmap_autorid backend provides a way to use an algorithmic mapping scheme to map UIDs/GIDs and SIDs that is more deterministic than idmap_tdb and easier to configure than idmap_rid. The module works similar to idmap_rid, but it automatically configures the range to be used for each domain,…
idmap_ad – Samba’s idmap_ad Backend for Winbind Description The idmap_ad plugin provides a way for Winbind to read id mappings from an AD server that uses RFC2307/SFU schema extensions. This module implements only the "idmap" API, and is READONLY. Mappings must be provided in advance by the administrator by adding the uidNumber attributes for users…
* Name idled – provide near real-time updates for IMAP IDLE Synopsis idled [ -C config-file ] Description Idled is a long lived datagram daemon which receives notifications of mailbox changes and signals the appropriate imapd to report the changes to the client. Idled is usually started from master. Idled reads its configuration options out…
ipmiutil_discover – discover IPMI LAN-enabled nodes Synopsis idiscover [-abegisx] Description idiscover is a program that uses IPMI LAN commands to discover any nodes on the LAN that are available, by probing the RMCP port (623.) on those nodes. This utility uses IPMI LAN, so no IPMI drivers are needed. There are three methods that can…
ident – nnrpd ident resolver Synopsis ident [-p port] [-t] Description This program attempts to resolve usernames for nnrpd by using the ident protocol to query the remote host. It contacts the remote host using either IPv4 or IPv6 depending on which protocol was used for the incoming NNTP connection. Options -p port If this…
ipmiutil_delloem – OEM commands for Dell servers Synopsis ipmiutil delloem [-mx -NPRUEFJTVY] commands Description ipmiutil delloem commands is a program that uses Dell OEM IPMI commands to perform platform-specific functions. Options -m 002000 Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade…
ipmiutil_dcmi – handle DCMI functions Synopsis ipmiutil dcmi [-admsx -NUPREFTVY] <function> Description This ipmiutil dcmi subcommand handles DCMI command functions according to the DCMI specification. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface if -N….
icupkg – extract or modify an ICU .dat archive Synopsis icupkg [ -h, -?, –help ] [ -tl, –type l | -tb, –type b | -te, –type e ] [ -c, –copyright | -C, –comment comment ] [ -a, –add list ] [ -r, –remove list ] [ -x, –extract list ] [ -l, –list…
iconvconfig – create iconv module configuration cache Synopsis iconvconfig [options] [directory]… Description The iconv(3) function internally uses gconv modules to convert to and from a character set. A configuration file is used to determine the needed modules for a conversion. Loading and parsing such a configuration file would slow down programs that use iconv(3), so…
ipmiutil_config – list, save, and restore BMC configuration parameters Synopsis ipmiutil config [-lpxLNUPREFJTVY] [-r file] [-s file] Description ipmiutil config is a program that uses an IPMI driver to send IPMI commands which list, save and restore BMC configuration parameters for LAN, Serial, PEF, SOL, User, Channel. This combines the functionality of ipmiutil lan (ilan)…
icnctrl – configure ICN ISDN adaptor Synopsis icnctrl [-d Driver-Id] action options … Description icnctrl is used to setup the ICN ISDN device driver and for downloading the firmware into the ISDN card. The use of icnctrl makes sense, if you are using an ICN card only. Options -d Driver-Id selects the S0 interface named…
ipmiutil_cmd – a tool to send specific IPMI commands via the command line. Synopsis ipmiutil cmd [-pqsx -NUPREFJTVY] bus rsSa netFn/lun cmd [data bytes] Description This ipmiutil cmd tool sends specific IPMI commands to the firmware. The commands are composed as hex values on the command line. This tool was written to allow in-band use…
icecast_selinux – Security Enhanced Linux Policy for the icecast processes Description Security-Enhanced Linux secures the icecast processes via flexible mandatory access control. The icecast processes execute with the icecast_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
iceauth_selinux – Security Enhanced Linux Policy for the iceauth processes Description Security-Enhanced Linux secures the iceauth processes via flexible mandatory access control. The iceauth processes execute with the iceauth_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
IBTRACERT – Trace Infiniband Path Synopsis ibtracert [options] [<lid|guid> [<startlid> [<endlid>]]] Description ibtracert uses SMPs to trace the path from a source GID/LID to a destination GID/LID. Each hop along the path is displayed until the destination is reached or a hop does not respond. By using the -m option, multicast path tracing can be…
IBSYSSTAT – System Status On An Infiniband Address Synopsis ibsysstat [options] <dest lid | guid> [<op>] Description ibsysstat uses vendor mads to validate connectivity between IB nodes and obtain other information about the IB node. ibsysstat is run as client/server. Default is to run as client. Options Current supported operations: ping \- verify connectivity to…
IBSWITCHES – show InfiniBand switch nodes in topology Synopsis ibswitches [options] [<topology-file>] Description ibswitches is a script which either walks the IB subnet topology or uses an already saved topology file and extracts the switch nodes. Options -C, –Ca <ca_name> use the specified ca_name. -P, –Port <ca_port> use the specified ca_port. -t, –timeout <timeout_ms> override…
IBSTATUS – Query Basic Status Of Infiniband Device(S) Synopsis ibstatus [-h] [devname[:port]]… Description ibstatus is a script which displays basic information obtained from the local IB driver. Output includes LID, SMLID, port state, link width active, and port physical state. Options -h, –help show the usage message devname InfiniBand device name portnum port number of…
IBSTAT – Query Basic Status Of Infiniband Device(S) Synopsis ibstat [options] <ca_name> [portnum] Description ibstat is a binary which displays basic information obtained from the local IB driver. Output includes LID, SMLID, port state, link width active, and port physical state. It is similar to the ibstatus utility but implemented as a binary rather than…
IBROUTERS – show InfiniBand router nodes in topology Synopsis ibrouters [options] [<topology-file>] Description ibrouters is a script which either walks the IB subnet topology or uses an already saved topology file and extracts the router nodes. Options -C, –Ca <ca_name> use the specified ca_name. -P, –Port <ca_port> use the specified ca_port. -t, –timeout <timeout_ms> override…