The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
bcopy – Bacula’s ‘Copy from tape’ Synopsis bcopy [options] input-archive output-archive Description This manual page documents briefly the bcopy command. Options A summary of options is included below. -? Show version and usage of program. -b bootstrap Specify a bootstrap file. -c config Specify configuration file. -d nn Set debug level to nn. -dt Print timestamp in debug output….
bconsole – Bacula’s management Console Synopsis bconsole [options] Description This manual page documents briefly the bconsole command. Options -D dir Select a Director. -l List defined Directors. -c config Specify configuration file. -d nn Set debug level to nn. -dt Print timestamp in debug output. -n No conio (for scripting). -s No signals (for debugging). Set command execution…
bcmxcp_usb – Experimental driver for UPSes supporting the BCM/XCP protocol over USB Note This man page only documents the hardware-specific features of the bcmxcp_usb driver. For information about the core driver, see nutupsdrv(8). This driver is a variant of the serial driver bcmxcp and uses the same core code. Supported Hardware This driver should recognize…
bcmxcp – Driver for UPSes supporting the serial BCM/XCP protocol Note This man page only documents the hardware-specific features of the bcmxcp driver. For information about the core driver, see nutupsdrv(8). Supported Hardware This driver should recognize all serial BCM/XCP-compatible UPSes. It has been developed and tested on Powerware PW5115 and PW9120 hardware. If your…
bcfg2_selinux – Security Enhanced Linux Policy for the bcfg2 processes Description Security-Enhanced Linux secures the bcfg2 processes via flexible mandatory access control. The bcfg2 processes execute with the bcfg2_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
bcfg2-server – Server for client configuration specifications Synopsis bcfg2-server [-D <pidfile>] [-d] [-v] [-C <Client>] Description bcfg2-server This daemon serves configurations to clients based on the data in its repository. Options -d Run bcfg2 in debug mode. -v Run bcfg2 in verbose mode. -C <ConfigFile Path> Use an alternative path for bcfg2.conf. The default is…
bcfg2-repo-validate – Check Bcfg2 repository data against data schemas Synopsis bcfg2-repo-validate [-v] Description bcfg2-repo-validate This script checks data against schemas, and it quite helpful in finding typos or malformed data. Options -C Specify path to bcfg2.conf (default /etc/bcfg2.conf) See Also bcfg2(1), bcfg2-server(8) Bugs None currently known
bcfg2-remote – Connect to a bcfg2 agent and trigger client execution Synopsis bcfg2-remote [-d <debug level>] [-H <agent host>] [-C <configfile>] [-k <ssl key>] [-p <agent tcp port>] Description bcfg2-remote connects to a client agent, uses the server certificate for authentication, and causes that client to run the bcfg2 client code with the options specified…
bcfg2-info – Creates a local version of the bcfg2 server core for state observation Synopsis bcfg2-info [-C <config file>] [-h] Description bcfg2-info Instantiate an instance of the Bcfg2 core for data examination and debugging purposes. Options -C <config file> Specify an alternative location for bcfg2.conf. (Default /etc/bcfg2.conf) -h Give a bit of help about the…
bcfg2-build-reports – Generate state reports for bcfg2 clients Synopsis bcfg2-build-reports Description bcfg2-build-reports Build all client state reports. See the Bcfg2 manual for report setup information. Options -c <configuration file> Specify an alternate report configuration path. The default is repo/etc/reports-configuration.xml -h Produce a help message -s <statistics Path> Use an alternative path for the statistics file….
bcfg2-admin – Perform repository administration tasks Synopsis bcfg2-admin [-C config-file] <mode> <mode args> <mode options> Description bcfg2-admin Perform bcfg2 repository administration Options -C <config-file> Specify the location of the configuration file (if it is not in /etc/bcfg2.conf) Modes init Initialize a new repository (interactive) client <action> <client> [attribute=value] Add or remove clients from metadata query…
bccmd – Utility for the CSR BCCMD interface Synopsis bccmd bccmd [-t <transport>] [-d <device>] <command> [<args>] bccmd [-h –help] Description bccmd issues BlueCore commands to Cambridge Silicon Radio devices. If run without the <command> argument, a short help page will be displayed. Options -t <transport> Specify the communication transport. Valid options are: HCI Local device…
batctl – B.A.T.M.A.N. advanced control and management tool Synopsis batctl [options] command|debug table [parameters] Description batctl offers a convenient way to configure the batman-adv kernel module as well as displaying debug information such as originator tables, translation tables and the debug log. In combination with a bat-hosts file batctl allows the use of host names instead of…
batcher – Article batching for InterNetNews Synopsis batcher [-rv] [-a articles] [-A total-articles] [-b size] [-B total-size] [-i string] [-N batches] [-p process] [-s separator] host [input] Description batcher reads a list of files and prepares news batches for the specified host. It is generally used to prepare UUCP feeds, but the resulting batches can…
basic_sasl_auth – Basic Authentication using SASL (specifically the cyrus-sasl authentication method) Version 1.0 Synopsis basic_sasl_auth Description basic_sasl_auth is an installed binary helper for Squid. SASL is configurable (somewhat like PAM). Each service authenticating against SASL identifies itself with an application name. Each application can be configured independently by the SASL administrator. Configuration To configure the…
basic_radius_auth – Squid RADIUS authentication helper Synopsis basic_radius_auth -f config file basic_radius_auth -h server name port ] [-i identifier ] -w secret [-t timeout ] Description basic_radius_auth allows Squid to connect to a RADIUS server to validate the user name and password of Basic HTTP authentication. Options -f configfile Specifies the path to a configuration…
basic_pop3_auth – POP3 authenticator for Squid Synopsis basic_pop3_auth server Description basic_pop3_auth authenticates user credentials against a POP3 server. Options The only option this helper takes is the name of the POP3 server to validate against. Author This program was written by Henrik Nordstrom <henrik [at] henriknordstrom.net> This manual was written by Amos Jeffries <squid3 [at]…
basic_pam_auth – PAM Basic authentication helper for Squid Synopsis basic_pam_auth [-n service name TTL ] [-o] [-1] Description basic_pam_auth allows Squid to connect to a mostly any available PAM database to validate the user name and password of Basic HTTP authentication. Options -s service-name Specifies the PAM service name Squid uses, defaults to squid -t…
basic_ncsa_auth – NCSA httpd-style password file authentication helper for Squid Synopsis basic_ncsa_auth passwd file Description basic_ncsa_auth allows Squid to read and authenticate user and password information from an NCSA/Apache httpd-style password file when using basic HTTP authentication. This password file can be manipulated using htpasswd. This authenticator accepts: * Blowfish – for passwords 72 characters…
basic_msnt_multi_domain_auth Synopsis basic_msnt_multi_domain_auth [options] Description basic_msnt_multi_domain_auth is a Squid authenticator to check user credentials against multiple NT domains using nmblookup. The user is expected to enter his/her credentials as domain