The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
axctl – Configure/Kill running AX.25 connections. Synopsis axctl [-v] port dest src window|t1|t2|t3|n2|idle|paclen|kill [parm] Description The axctl command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol layer for existing AX.25 connections. The connection is uniquely identified via the combination of port, destination callsign and…
ax25mond – dump the AX.25 network traffic and and provide sockets where the received data will be retransmitted Synopsis ax25mond [-v|–version] Description Ax25mond will first read it’s configuration file /etc/ax25/ax25mond.conf. It will then wait for connects on the sockets specified in this file. When connected, it will transmit all data which it has received on…
ax25ipd – AX.25 into IP Encapsulator Synopsis ax25ipd [options] Description ax25ipd is an RFC1226 compliant daemon capable of providing the encapsualtion neccessary to send and receive AX.25 traffic across an IP transport. Normally invoked as part of the boot order network initialisation, ax25ipd is capable of talking directly to a serial port connected tnc, or…
ax25d – General purpose AX.25, NET/ROM and Rose daemon Synopsis ax25d [-v] [-c altconffile] [-l] Description Ax25d is a general purpose server daemon that listens on a number of AX.25, NET/ROM and Rose ports and offers different services depending upon port, callsign and other parameters. Ax25d is driven by a complex configuration file, a full…
ax25_call, netrom_call, rose_call, tcp_call – make an AX.25, NET/ROM, ROSE or TCP connection Synopsis ax25_call [-c] [-i paclen] [-o paclen] port local_call remote_call [digipeaters …] netrom_call [-c] [-i paclen] [-o paclen] port local_call remote_netrom_addr rose_call [-c] [-i paclen] [-o paclen] port local_call remote_call remote_rose_addr tcp_call [-c] [-i paclen] [-o paclen] remote_addr remote_port Description ax25_call, netrom_call,…
awstats_selinux – Security Enhanced Linux Policy for the awstats processes Description Security-Enhanced Linux secures the awstats processes via flexible mandatory access control. The awstats processes execute with the awstats_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
awstats_script_selinux – Security Enhanced Linux Policy for the awstats_script processes Description Security-Enhanced Linux secures the awstats_script processes via flexible mandatory access control. The awstats_script processes execute with the awstats_script_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
avmcapictrl – Add, reset or remove active AVM cards and load firmware Synopsis avmcapictrl add <portbase> <irq> <type> avmcapictrl load <bootcode> [<contrnr> [<protocol> [P2P | <dn1>:<spid1> [<dn2>:<spid2>]]]] avmcapictrl reset [contrnr] avmcapictrl remove [contrnr] avmcapictrl trace [contrnr] [off|short|on|full|shortnodata|nodata] avmcapictrl addcard <driver> <portbase> <irq> [ <membase> [ <cardnr> ] ] Description avmcapictrl is used to register active AVM ISA…
avcstat – Display SELinux AVC statistics Synopsis avcstat [-c] [-f status_file] [interval] Description Display SELinux AVC statistics. If the interval parameter is specified, the program will loop, displaying updated statistics every interval seconds. Relative values are displayed by default. Options -c Display the cumulative values. -f Specifies the location of the AVC statistics file, defaulting…
avahi_selinux – Security Enhanced Linux Policy for the avahi processes Description Security-Enhanced Linux secures the avahi processes via flexible mandatory access control. The avahi processes execute with the avahi_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
avahi-dnsconfd – Unicast DNS server from mDNS/DNS-SD configuration daemon Synopsis avahi-dnsconfd [options] avahi-dnsconfd –kill avahi-dnsconfd –refresh avahi-dnsconfd –check Description avahi-dnsconfd connects to a running avahi-daemon and runs the script /etc/avahi/dnsconfd.action for each unicast DNS server that is announced on the local LAN. This is useful for configuring unicast DNS servers in a DHCP-like fashion with…
avahi-dnsconfd.action – avahi-dnsconfd action script Synopsis /etc/avahi/avahi-dnsconfd.action Description avahi-dnsconfd.action is the action script that is called whenever a new unicast DNS server is found or removed by avahi-dnsconfd. The default script as shipped with avahi patches /etc/resolv.conf to reflect the changed unicast DNS server configuration. Parameters argv[1] Contains the character "+" if the DNS server…
avahi-daemon – The Avahi mDNS/DNS-SD daemon Synopsis avahi-daemon [options] avahi-daemon –kill avahi-daemon –reload avahi-daemon –check Description The Avahi mDNS/DNS-SD daemon implements Apple’s Zeroconf architecture (also known as "Rendezvous" or "Bonjour"). The daemon registers local IP addresses and static services using mDNS/DNS-SD and provides two IPC APIs for local programs to make use of the mDNS…
avahi-autoipd – IPv4LL network address configuration daemon Synopsis avahi-autoipd [options] interface avahi-autoipd –kill interface avahi-autoipd –refresh interface avahi-autoipd –check interface Description avahi-autoipd implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local Addresses" (IETF RFC3927), a protocol for automatic IP address configuration from the link-local 169.254.0.0/16 range without the need for a central server. It is primarily intended…
avahi-autoipd.action – avahi-autoipd action script Synopsis /etc/avahi/avahi-autoipd.action Description avahi-autoipd.action is the action script that is called whenever an IP address has been acquired by avahi-autoipd or when it detected an IP address conflict. The script should add or remove the specified address from the specified network interface. Parameters argv[1] An event string: one of BIND,…
auvirt – a program that shows data related to virtual machines Synopsis auvirt [ OPTIONS ] Description auvirt shows a list of guest sessions found in the audit logs. If a guest is specified, only the events related to that guest is considered. To specify a guest, both UUID or VM name can be given….
autrace – a program similar to strace Synopsis autrace program [-r] [program-args]… Description autrace is a program that will add the audit rules to trace a process similar to strace. It will then execute the program passing arguments to it. The resulting audit information will be in the audit logs if the audit daemon is…
autotrust – automated updates of DNSSEC trust anchors. Synopsis autotrust [-c configfile] [-d] [-h] [-v verbosity] Description autotrust is a standalone application that automatically updates DNSSEC trust anchors. These can be used for DNSSEC aware resolvers like Unbound or BIND9. It is compliant with RFC 5011, with the exception of query intervals and retry times….
autosupport — interactive script to provide Digium[tm]’s support with information Synopsis autosupport Description autosupport is a script that is normally run by a user contacting Digium’s support to automate gathering support information. It will probe the system for some configuration and run-time information, and will also prompt the user for some optional access information (IP…
automount_selinux – Security Enhanced Linux Policy for the automount processes Description Security-Enhanced Linux secures the automount processes via flexible mandatory access control. The automount processes execute with the automount_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…