ovsdb-client (1) - Linux Manuals

ovsdb-client: command-line interface to ovsdb-server(1)

NAME

ovsdb-client - command-line interface to

ovsdb-server(1)

SYNOPSIS

ovsdb-client [options] list-dbs [server]
ovsdb-client [options] get-schema [server] [database]
ovsdb-client [options] get-schema-version [server] [database]
ovsdb-client [options] list-tables [server] [database]
ovsdb-client [options] list-columns [server] [database] [table]
ovsdb-client [options] transact [server] transaction
ovsdb-client [options] dump [server] [database] [table [column...]]
ovsdb-client [options] monitor [server] [database] table [column[,column]...]...
ovsdb-client [options] monitor [server] [database] ALL
ovsdb-client help
Output formatting options:
[--format=format] [--data=format] [--no-heading] [--pretty] [--bare] [--no-heading] [--timestamp]
Daemon options:
[--pidfile[=pidfile]] [--overwrite-pidfile] [--detach] [--no-chdir]
Logging options:
[-v[module[:destination[:level]]]]...
[--verbose[=module[:destination[:level]]]]...
[--log-file[=file]]
Public key infrastructure options:
[--private-key=privkey.pem]
[--certificate=cert.pem]
[--ca-cert=cacert.pem]
[--bootstrap-ca-cert=cacert.pem]
Common options:
[-h | --help] [-V | --version]

DESCRIPTION

The ovsdb-client program is a command-line client for interacting with a running ovsdb-server process. Each command connects to an OVSDB server, which is unix:/var/run/openvswitch/db.sock by default, or may be specified as server in one of the following forms:
ssl:ip:port
The specified SSL port on the host at the given ip, which must be expressed as an IP address (not a DNS name) in IPv4 or IPv6 address format. If ip is an IPv6 address, then wrap ip with square brackets, e.g.: ssl:[::1]:6640. The --private-key, --certificate, and --ca-cert options are mandatory when this form is used.
tcp:ip:port
Connect to the given TCP port on ip, where ip can be IPv4 or IPv6 address. If ip is an IPv6 address, then wrap ip with square brackets, e.g.: tcp:[::1]:6640.
unix:file
On POSIX, connect to the Unix domain server socket named file.
On Windows, connect to a localhost TCP port whose value is written in file.
pssl:port[:ip]
Listen on the given SSL port for a connection. By default, connections are not bound to a particular local IP address and it listens only on IPv4 (but not IPv6) addresses, but specifying ip limits connections to those from the given ip, either IPv4 or IPv6 address. If ip is an IPv6 address, then wrap ip with square brackets, e.g.: pssl:6640:[::1]. The --private-key, --certificate, and --ca-cert options are mandatory when this form is used.
ptcp:port[:ip]
Listen on the given TCP port for a connection. By default, connections are not bound to a particular local IP address and it listens only on IPv4 (but not IPv6) addresses, but ip may be specified to listen only for connections to the given ip, either IPv4 or IPv6 address. If ip is an IPv6 address, then wrap ip with square brackets, e.g.: ptcp:6640:[::1].
punix:file
On POSIX, listen on the Unix domain server socket named file for a connection.
On Windows, listen on a kernel chosen TCP port on the localhost. The kernel chosen TCP port value is written in file.

The default database is Open_vSwitch.

Commands

The following commands are implemented:
list-dbs [server]
Connects to server, retrieves the list of known databases, and prints them one per line. These database names are the ones that may be used for database in the following commands.
get-schema [server] [database]
Connects to server, retrieves the schema for database, and prints it in JSON format.
get-schema-version [server] [database]
Connects to server, retrieves the schema for database, and prints its version number on stdout. A schema version number has the form x.y.z. See ovs-vswitchd.conf.db(5) for details.
Schema version numbers and Open vSwitch version numbers are independent.
If database was created before schema versioning was introduced, then it will not have a version number and this command will print a blank line.
list-tables [server] [database]
Connects to server, retrieves the schema for database, and prints a table listing the name of each table within the database.
list-columns [server] [database] table
Connects to server, retrieves the schema for database, and prints a table listing the name and type of each column. If table is specified, only columns in that table are listed; otherwise, the tables include columns in all tables.
transact [server] transaction
Connects to server, sends it the specified transaction, which must be a JSON array containing one or more valid OVSDB operations, and prints the received reply on stdout.
dump [server] [database] [table [column...]]
Connects to server, retrieves all of the data in database, and prints it on stdout as a series of tables. If table is specified, only that table is retrieved. If at least one column is specified, only those columns are retrieved.
monitor [server] [database] table [column[,column]...]...
Connects to server and monitors the contents of table in database. By default, the initial contents of table are printed, followed by each change as it occurs. If at least one column is specified, only those columns are monitored. The following column names have special meanings:
!initial
Do not print the initial contents of the specified columns.
!insert
Do not print newly inserted rows.
!delete
Do not print deleted rows.
!modify
Do not print modifications to existing rows.
Multiple [column[,column]...] groups may be specified as separate arguments, e.g. to apply different reporting parameters to each group. Whether multiple groups or only a single group is specified, any given column may only be mentioned once on the command line.
If --detach is used with monitor, then ovsdb-client detaches after it has successfully received and printed the initial contents of table.
monitor [server] [database] ALL
Connects to server and monitors the contents of all tables in database. Prints initial values and all kinds of changes to all columns in the database. The --detach option causes ovsdb-client to detach after it successfully receives and prints the initial database contents.

OPTIONS

Output Formatting Options

Much of the output from ovsdb-client is in the form of tables. The following options controlling output formatting:
-f format

--format=format
Sets the type of table formatting. The following types of format are available:
table (default)
2-D text tables with aligned columns.
list
A list with one column per line and rows separated by a blank line.
html
HTML tables.
csv
Comma-separated values as defined in RFC 4180.
json
JSON format as defined in RFC 4627. The output is a sequence of JSON objects, each of which corresponds to one table. Each JSON object has the following members with the noted values:
caption
The table's caption. This member is omitted if the table has no caption.
headings
An array with one element per table column. Each array element is a string giving the corresponding column's heading.
data
An array with one element per table row. Each element is also an array with one element per table column. The elements of this second-level array are the cells that constitute the table. Cells that represent OVSDB data or data types are expressed in the format described in the OVSDB specification; other cells are simply expressed as text strings.
-d format

--data=format
Sets the formatting for cells within output tables. The following types of format are available:
string (default)
The simple format described in the Database Values section of ovs-vsctl(8).
bare
The simple format with punctuation stripped off: [] and {} are omitted around sets, maps, and empty columns, items within sets and maps are space-separated, and strings are never quoted. This format may be easier for scripts to parse.
json
JSON.
The json output format always outputs cells in JSON format, ignoring this option.
--no-heading
This option suppresses the heading row that otherwise appears in the first row of table output.
--pretty
By default, JSON in output is printed as compactly as possible. This option causes JSON in output to be printed in a more readable fashion. Members of objects and elements of arrays are printed one per line, with indentation.
This option does not affect JSON in tables, which is always printed compactly.
--bare
Equivalent to --format=list --data=bare --no-headings.
--timestamp
For the monitor command, adds a timestamp to each table update. Most output formats add the timestamp on a line of its own just above the table. The JSON output format puts the timestamp in a member of the top-level JSON object named time.

Daemon Options

The daemon options apply only to the monitor command. With any other command, they have no effect. The following options are valid on POSIX based platforms.
--pidfile[=pidfile]
Causes a file (by default, ovsdb-client.pid) to be created indicating the PID of the running process. If the pidfile argument is not specified, or if it does not begin with /, then it is created in /var/run/openvswitch.
If --pidfile is not specified, no pidfile is created.
--overwrite-pidfile
By default, when --pidfile is specified and the specified pidfile already exists and is locked by a running process, ovsdb-client refuses to start. Specify --overwrite-pidfile to cause it to instead overwrite the pidfile.
When --pidfile is not specified, this option has no effect.
--detach
Runs ovsdb-client as a background process. The process forks, and in the child it starts a new session, closes the standard file descriptors (which has the side effect of disabling logging to the console), and changes its current directory to the root (unless --no-chdir is specified). After the child completes its initialization, the parent exits.
--monitor
Creates an additional process to monitor the ovsdb-client daemon. If the daemon dies due to a signal that indicates a programming error (SIGABRT, SIGALRM, SIGBUS, SIGFPE, SIGILL, SIGPIPE, SIGSEGV, SIGXCPU, or SIGXFSZ) then the monitor process starts a new copy of it. If the daemon dies or exits for another reason, the monitor process exits.
This option is normally used with --detach, but it also functions without it.
--no-chdir
By default, when --detach is specified, ovsdb-client changes its current working directory to the root directory after it detaches. Otherwise, invoking ovsdb-client from a carelessly chosen directory would prevent the administrator from unmounting the file system that holds that directory.
Specifying --no-chdir suppresses this behavior, preventing ovsdb-client from changing its current working directory. This may be useful for collecting core files, since it is common behavior to write core dumps into the current working directory and the root directory is not a good directory to use.
This option has no effect when --detach is not specified.
--user
Causes ovsdb-client to run as a different user specified in "user:group", thus dropping most of the root privileges. Short forms "user" and ":group" are also allowed, with current user or group are assumed respectively. Only daemons started by the root user accepts this argument.
On Linux, daemons will be granted CAP_IPC_LOCK and CAP_NET_BIND_SERVICES before dropping root privileges. Daemons interact with datapath, such as ovs-vswitchd, will be granted two additional capabilities, namely CAP_NET_ADMIN and CAP_NET_RAW. The capability change will apply even if new user is "root".
On Windows, this option is not currently supported. For security reasons, specifying this option will cause the daemon process not to start.

Logging Options

-v[spec]

--verbose=[spec]
Sets logging levels. Without any spec, sets the log level for every module and destination to dbg. Otherwise, spec is a list of words separated by spaces or commas or colons, up to one from each category below:
A valid module name, as displayed by the vlog/list command on ovs-appctl(8), limits the log level change to the specified module.
syslog, console, or file, to limit the log level change to only to the system log, to the console, or to a file, respectively. (If --detach is specified, ovsdb-client closes its standard file descriptors, so logging to the console will have no effect.)
On Windows platform, syslog is accepted as a word and is only useful along with the --syslog-target option (the word has no effect otherwise).
off, emer, err, warn, info, or dbg, to control the log level. Messages of the given severity or higher will be logged, and messages of lower severity will be filtered out. off filters out all messages. See ovs-appctl(8) for a definition of each log level.
Case is not significant within spec.
Regardless of the log levels set for file, logging to a file will not take place unless --log-file is also specified (see below).
For compatibility with older versions of OVS, any is accepted as a word but has no effect.
-v

--verbose
Sets the maximum logging verbosity level, equivalent to --verbose=dbg.
-vPATTERN:destination:pattern

--verbose=PATTERN:destination:pattern
Sets the log pattern for destination to pattern. Refer to ovs-appctl(8) for a description of the valid syntax for pattern.
-vFACILITY:facility

--verbose=FACILITY:facility
Sets the RFC5424 facility of the log message. facility can be one of kern, user, mail, daemon, auth, syslog, lpr, news, uucp, clock, ftp, ntp, audit, alert, clock2, local0, local1, local2, local3, local4, local5, local6 or local7. If this option is not specified, daemon is used as the default for the local system syslog and local0 is used while sending a message to the target provided via the --syslog-target option.
--log-file[=file]
Enables logging to a file. If file is specified, then it is used as the exact name for the log file. The default log file name used if file is omitted is /var/log/openvswitch/ovsdb-client.log.
--syslog-target=host:port
Send syslog messages to UDP port on host, in addition to the system syslog. The host must be a numerical IP address, not a hostname.
--syslog-method=method
Specify method how syslog messages should be sent to syslog daemon. Following forms are supported:
libc, use libc syslog() function. This is the default behavior. Downside of using this options is that libc adds fixed prefix to every message before it is actually sent to the syslog daemon over /dev/log UNIX domain socket.
unix:file, use UNIX domain socket directly. It is possible to specify arbitrary message format with this option. However, rsyslogd 8.9 and older versions use hard coded parser function anyway that limits UNIX domain socket use. If you want to use arbitrary message format with older rsyslogd versions, then use UDP socket to localhost IP address instead.
udp:ip:port, use UDP socket. With this method it is possible to use arbitrary message format also with older rsyslogd. When sending syslog messages over UDP socket extra precaution needs to be taken into account, for example, syslog daemon needs to be configured to listen on the specified UDP port, accidental iptables rules could be interfering with local syslog traffic and there are some security considerations that apply to UDP sockets, but do not apply to UNIX domain sockets.

Public Key Infrastructure Options

-p privkey.pem

--private-key=privkey.pem
Specifies a PEM file containing the private key used as ovsdb-client's identity for outgoing SSL connections.
-c cert.pem

--certificate=cert.pem
Specifies a PEM file containing a certificate that certifies the private key specified on -p or --private-key to be trustworthy. The certificate must be signed by the certificate authority (CA) that the peer in SSL connections will use to verify it.
-C cacert.pem

--ca-cert=cacert.pem
Specifies a PEM file containing the CA certificate that ovsdb-client should use to verify certificates presented to it by SSL peers. (This may be the same certificate that SSL peers use to verify the certificate specified on -c or --certificate, or it may be a different one, depending on the PKI design in use.)
-C none

--ca-cert=none
Disables verification of certificates presented by SSL peers. This introduces a security risk, because it means that certificates cannot be verified to be those of known trusted hosts.
--bootstrap-ca-cert=cacert.pem
When cacert.pem exists, this option has the same effect as -C or --ca-cert. If it does not exist, then ovsdb-client will attempt to obtain the CA certificate from the SSL peer on its first SSL connection and save it to the named PEM file. If it is successful, it will immediately drop the connection and reconnect, and from then on all SSL connections must be authenticated by a certificate signed by the CA certificate thus obtained.
This option exposes the SSL connection to a man-in-the-middle attack obtaining the initial CA certificate, but it may be useful for bootstrapping.
This option is only useful if the SSL peer sends its CA certificate as part of the SSL certificate chain. The SSL protocol does not require the server to send the CA certificate.
This option is mutually exclusive with -C and --ca-cert.

Other Options

-h

--help
Prints a brief help message to the console.
-V

--version
Prints version information to the console.

SEE ALSO

ovsdb-server(1), ovsdb-client(1), and the OVSDB specification.